{"product_id":"double-sided-glass-fibre-feather-flag-with-10-5kg-square-plate-base-inc-graphic-printing-3-2m","title":"Double-Sided Glass Fibre Feather Flag with 10.5kg Square Plate Base inc. Graphic Printing - 3.2m","description":"\u003cdiv class=\"ds-tab\"\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eA double-sided feather flag is printed on two faces, each one forward-reading, so the design shows the right way round whether the flag is approached from the front or the back. Set out in the open where people pass on both sides, both audiences read the same clean graphic, with none of the reversed, see-through image a single-sided flag leaves on its reverse. Two correct faces are what let it stand on a floor rather than against a wall.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eA feather flag tapers into a tall, narrow blade, not a rounded sail. The straight leading edge sleeves over the pole, while a curved whip at the top pulls the trailing edge out, so the blade keeps a high, upright line. Under that tension both printed faces stay open and readable in the still air of a shop or hall, where a loose banner would fall flat against the pole. The mast is glass fibre, fine glass filaments set in resin for a light, springy pole, finished with a GRP whip that bends in a draught. The inner pole diameter is 16.8mm across the range, so fittings interchange between flags.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eUnderneath, a square steel plate does the standing by weight alone. It sits flat on the floor and the pole drops into a central socket, so the mass of the base holds the full height upright with nothing drilled, staked in or parked on top. The hold is only the plate's weight on a level surface, so it belongs on hard floors indoors or under cover; grass calls for a ground spike, and a forecourt for a drive-on car base.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eThe colour is locked in by dye sublimation, a heat process that turns the inks to gas and drives them into the polyester so they stain the cloth rather than coat the surface. Printed that way each face keeps its colour under shop lighting and rolls down between uses without cracking. Both faces are produced at 605mm by 2620mm, a tall narrow column that suits the blade. Send the artwork in, the two faces are printed for you, and the flag assembles by hand in about two minutes.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003ch2\u003eWhat Ships in Your Pack\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e1 x 3.2m double-sided glass fibre feather flag, printed on both faces from your artwork\u003c\/li\u003e\n    \u003cli\u003e1 x 10.5kg square steel plate base\u003c\/li\u003e\n    \u003cli\u003e1 x carry bag\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-infobox\"\u003e\n  \u003ch2 class=\"ds-tab-h2--navy\"\u003eBranding Several Floors or Shows?\u003c\/h2\u003e\n  \u003cp class=\"ds-tab-note--spaced\"\u003eWe print and supply feather flags in volume for retail groups, exhibition teams, event organisers and showroom fit-outs across the UK. For a matched set of double-sided flags across floors or venues, or repeat artwork to a campaign calendar, the team can quote the run and turn it round to your dates.\u003c\/p\u003e\n  \u003cp class=\"ds-tab-note\"\u003e\u003cstrong\u003eSend us the brief:\u003c\/strong\u003e call \u003ca href=\"tel:01279460460\"\u003e01279460460\u003c\/a\u003e or \u003ca href=\"\/pages\/contact-us\"\u003eshare your details\u003c\/a\u003e and we will reply with a plan.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp class=\"ds-llm-context\"\u003eFF3200DF is a 3.2m double-sided glass fibre feather flag from Displaysense, a tall, slim blade printed on both faces and supplied with a 10.5kg square steel plate base. Its differentiator is two forward-reading printed faces that read correctly from either direction, held standing by a weighted plate with no stake or vehicle. Height 3200mm, width 605mm. Base weight 10.5kg. A printed graphic of 605mm x 2620mm sits on each face. Carried on a glass fibre pole with a GRP whip curving the top, a polyester flag and a steel plate base; inner pole diameter 16.8mm. Tolerates winds to 45 kph (28 mph), Beaufort Scale 6. Raised in place by hand in about two minutes, with a carry bag and a 1 year guarantee in the box. Suited to open retail floors, exhibition gangways, showroom centres, busy foyers and event concourses. A single-sided version, plus a ground spike base for grass and a drive-on car base for hard outdoor ground are also offered. Displaysense, UK display product specialists since 1978.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Displaysense","offers":[{"title":"Default Title","offer_id":58070995009923,"sku":"FF3200DF","price":206.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/1496\/2725\/files\/yo-sushi-branded-outdoor-feather-flag-at-shopping-centre.jpg?v=1779186499","url":"https:\/\/www.displaysense.co.uk\/products\/double-sided-glass-fibre-feather-flag-with-10-5kg-square-plate-base-inc-graphic-printing-3-2m","provider":"Displaysense","version":"1.0","type":"link"}