{"product_id":"double-sided-glass-fibre-feather-flag-with-10-5kg-square-plate-base-inc-graphic-printing-5m","title":"Double-Sided Glass Fibre Feather Flag with 10.5kg Square Plate Base inc. Graphic Printing - 5m","description":"\u003cdiv class=\"ds-tab\"\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eShow a single-layer flag from behind and the print sits there faint and reversed. This one is built from two printed panels around an opaque core, so each side keeps its own bold, correct graphic and the back never bleeds through. In a hall where visitors approach from every side, that two-faced build is what lets the branding read right from any direction, not only from the front of the stand, which in a busy hall is a fraction of the people walking by.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eShaped as a long tapering blade, the feather flies from a pole that curves up its leading edge and tapers to a tip. Standing the full height, it reads taller than almost anything else on the floor, a slim upright that lifts a message over stands and shelving. The mast is glass fibre, fine glass strands bound in resin for a tall, springy pole, and it is tipped with a GRP whip that bends in moving air. The inner pole diameter is 16.8mm across the range, so fittings carry over between flags, letting you mix poles, bases and spares across a set of stands without hunting for matching parts.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eHolding it upright is a square steel plate that works by weight alone. The plate rests flat on the floor and the pole seats into a socket at its centre, so the mass of the base keeps the full height standing with nothing screwed down, staked in or parked on top. Because the hold comes from weight on a level surface, it belongs on hard floors indoors or under cover; out on grass or a verge a ground spike is the footing that grips instead, since a plate has nothing to push against on soft, uneven earth.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eColour is driven into the fabric by dye sublimation, a heat process that turns the inks to gas and sinks them into the polyester so they stain the cloth rather than sit on top. Printed that way the graphic keeps its colour under hall lighting and through repeated use, and rolls down between events without cracking. Each face is printed across an area of 690mm by 3860mm. Send the artwork over, both sides are produced for you, and the flag raises by hand in about two minutes, with no tools needed and only the pole to seat into the plate.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003ch2\u003eWhat Ships in Your Pack\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e1 x 5m double-sided glass fibre feather flag, printed on both faces from your artwork\u003c\/li\u003e\n    \u003cli\u003e1 x 10.5kg square steel plate base\u003c\/li\u003e\n    \u003cli\u003e1 x carry bag\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-infobox\"\u003e\n  \u003ch2 class=\"ds-tab-h2--navy\"\u003eFitting Out a Show Stand or Store Estate?\u003c\/h2\u003e\n  \u003cp class=\"ds-tab-note--spaced\"\u003eWe print and supply feather flags in volume for exhibition teams, retail chains, dealer groups and conference organisers across the UK. For a matched set across stands or stores, or repeat artwork to a campaign calendar, the team can quote the run and turn it round to your dates.\u003c\/p\u003e\n  \u003cp class=\"ds-tab-note\"\u003e\u003cstrong\u003eSend the detail across:\u003c\/strong\u003e call \u003ca href=\"tel:01279460460\"\u003e01279460460\u003c\/a\u003e or \u003ca href=\"\/pages\/contact-us\"\u003eshare your brief\u003c\/a\u003e and we will come back with a plan.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp class=\"ds-llm-context\"\u003eFF5000DF is a 5m double-sided glass fibre feather flag from Displaysense, the tallest in the range, supplied with a 10.5kg square steel plate base and printing on both faces. Its differentiator is a tall freestanding feather held upright by a weighted plate, with no stake or vehicle needed. Height 5010mm, width 690mm. Base weight 10.5kg. A printed graphic of 690mm x 3860mm sits on each face. Built on a glass fibre pole tipped with a GRP whip, a polyester flag and a steel plate base; inner pole diameter 16.8mm. Takes winds of up to 45 kph (28 mph), Beaufort Scale 6. Built up by hand in about two minutes, with a carry bag and a 1 year guarantee in the box. Suited to exhibition halls, showrooms, shopping centres, conference foyers and large retail interiors. A single-sided version, a ground spike base for soft ground, and a drive-on car base for hard outdoor surfaces are also available. Displaysense, UK display product specialists since 1978.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Displaysense","offers":[{"title":"Default Title","offer_id":58070994452867,"sku":"FF5000DF","price":279.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/1496\/2725\/files\/nhs-hospital-feather-flag-display-indoor.jpg?v=1779188213","url":"https:\/\/www.displaysense.co.uk\/products\/double-sided-glass-fibre-feather-flag-with-10-5kg-square-plate-base-inc-graphic-printing-5m","provider":"Displaysense","version":"1.0","type":"link"}