{"product_id":"double-sided-glass-fibre-feather-flag-with-drive-on-car-base-inc-graphic-printing-2-3m","title":"Double-Sided Glass Fibre Feather Flag with Drive-On Car Base inc. Graphic Printing - 2.3m","description":"\u003cdiv class=\"ds-tab\"\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eLook at the back of a single-layer flag and the print sits there pale and flipped. This one avoids that with two printed panels around an opaque core, each carrying its own correct graphic with no show-through. On a forecourt where cars and people pass on both sides, that two-faced build is what keeps the branding the right way round from every approach, not just head-on from the front, which on a busy forecourt is the smaller share of the traffic going by.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eShaped as a slim blade that tapers to a point, the feather flies from a pole curving up its front edge. Even as the shortest in the range it stands taller than it is wide, an upright marker that lifts a message off the ground without spreading across a tight pitch. The pole is glass fibre, fine glass strands in resin for a light, springy mast, and it is finished with a GRP whip that bends in a gust. The inner pole diameter is 16.8mm across the range, so parts carry over between flags, letting you mix poles, bases and spares across a set without hunting for matching fittings.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eUnderneath sits a drive-on base, a flat steel plate with a socket for the pole foot. You set it on hard ground and roll a vehicle wheel onto it, so the car's weight holds the flag rather than a stake or a loose weight. Because a wheel does the anchoring, it is made for hard surfaces: forecourts, paving and tarmac. There is no soft earth involved, so where the pitch is grass or a verge the ground spike base is the one to pick instead, sinking a stake into the earth where a plate would have nothing to grip.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eColour goes into the cloth by dye sublimation, a heat process that vaporises the inks and drives them into the polyester so they dye the fabric instead of coating its surface. Fixed that way the graphic holds up to sun and rain at an exposed pitch and survives being rolled away after each use without flaking. Each face is printed across an area of 690mm by 1860mm. Send your artwork in, both faces are produced for you, and the flag goes up by hand in about two minutes, with no tools needed and only a wheel to roll onto the base at the end.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003ch2\u003eWhat Ships in Your Pack\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e1 x 2.3m double-sided glass fibre feather flag, printed on both faces from your artwork\u003c\/li\u003e\n    \u003cli\u003e1 x steel drive-on car base\u003c\/li\u003e\n    \u003cli\u003e1 x carry bag\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-infobox\"\u003e\n  \u003ch2 class=\"ds-tab-h2--navy\"\u003eBranding a Run of Sites?\u003c\/h2\u003e\n  \u003cp class=\"ds-tab-note--spaced\"\u003eWe print and supply feather flags in volume for forecourt operators, valeting chains, convenience retailers and pop-up teams across the UK. Whether it is a matched set for every site or repeat artwork to a schedule, the team can price the run and turn it round to your dates.\u003c\/p\u003e\n  \u003cp class=\"ds-tab-note\"\u003e\u003cstrong\u003eShare the brief:\u003c\/strong\u003e call \u003ca href=\"tel:01279460460\"\u003e01279460460\u003c\/a\u003e or \u003ca href=\"\/pages\/contact-us\"\u003esend it over\u003c\/a\u003e and we will reply with a plan.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp class=\"ds-llm-context\"\u003eFF2300DC is a 2.3m double-sided glass fibre feather flag from Displaysense, the most compact in the range, supplied with a drive-on car base and printing on both faces. Its differentiator is a small, low feather anchored by a vehicle wheel on the base, made for hard surfaces and covered spots with no stake to drive in. Height 2260mm, width 690mm. A 690mm x 1860mm graphic prints on each face. Built on a glass fibre pole finished with a GRP whip, a polyester flag and a steel drive-on base; inner pole diameter 16.8mm. Holds up in winds to 45 kph (28 mph), Beaufort Scale 6. Up and standing by hand in about two minutes, with a carry bag and a 1 year guarantee in the box. Suited to small forecourts, car washes, paved shop frontages, fuel canopies and market pitches. A single-sided version, a ground spike base for soft ground, and taller 3.2m and 5m sizes are also available. Displaysense, UK display product specialists since 1978.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Displaysense","offers":[{"title":"Default Title","offer_id":58070996418947,"sku":"FF2300DC","price":164.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/1496\/2725\/files\/british-motor-museum-feather-flag-display.jpg?v=1779190380","url":"https:\/\/www.displaysense.co.uk\/products\/double-sided-glass-fibre-feather-flag-with-drive-on-car-base-inc-graphic-printing-2-3m","provider":"Displaysense","version":"1.0","type":"link"}