{"product_id":"double-sided-glass-fibre-feather-flag-with-drive-on-car-base-inc-graphic-printing-5m","title":"Double-Sided Glass Fibre Feather Flag with Drive-On Car Base inc. Graphic Printing - 5m","description":"\u003cdiv class=\"ds-tab\"\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eBecause the back of a one-layer flag shows the design faint and reversed, this one is made differently: two printed faces are bonded around an opaque core that blocks the light between them. Each side then carries its own full, correctly-read graphic, independent of the other. For traffic that approaches a forecourt from both ends of the road, printing both faces is what keeps the message legible to drivers coming either way, not only those heading in one direction.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eA feather flag is the tall, narrow blade that tapers to a tip, flown from a pole that curves up its leading edge. It is the shape that reaches highest for the least width, a slim upright that drivers catch from a long way off. The pole is glass fibre, fine glass strands bound in resin to stay light and springy, and it is finished with a GRP whip that lets the top flex in the wind. The inner pole diameter is 16.8mm throughout the range, so parts carry across between flags, letting masts, bases and spares interchange across a forecourt set.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eIt is held down by a drive-on base, a flat steel plate the pole foot drops into. You set the plate on hard ground and park a vehicle wheel on top, and the weight of the car does the rest, holding far more securely than any portable weight could. Since the anchoring comes from the wheel and not a stake, the flag is made for hard standing: forecourts, car parks and paved frontages. With no soft ground in play, grass is the one place it cannot stand, and there the ground spike base is the version to choose instead.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eThe print is fixed by dye sublimation, a heat process that turns the inks to gas so they sink into the polyester and dye the fibres themselves rather than coat the top. A graphic locked in like that keeps its colour through sun and rain out on an open forecourt and survives repeated rolling without lifting. Each face is printed across an area of 690mm by 3860mm, the largest blade in the feather range. Send the artwork over, both sides are printed for you, and the flag is up by hand in around two minutes.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003ch2\u003eWhat Ships in Your Pack\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e1 x 5m double-sided glass fibre feather flag, printed on both faces from your artwork\u003c\/li\u003e\n    \u003cli\u003e1 x steel drive-on car base\u003c\/li\u003e\n    \u003cli\u003e1 x carry bag\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-infobox\"\u003e\n  \u003ch2 class=\"ds-tab-h2--navy\"\u003eBranding a Dealer Group or Forecourt Network?\u003c\/h2\u003e\n  \u003cp class=\"ds-tab-note--spaced\"\u003eWe print and supply feather flags in volume for dealer groups, fuel retailers, merchant chains and retail park operators across the UK. For a matched set across sites, or repeat artwork to a campaign calendar, the team can quote the run and turn it round to your dates.\u003c\/p\u003e\n  \u003cp class=\"ds-tab-note\"\u003e\u003cstrong\u003eSend the detail over:\u003c\/strong\u003e call \u003ca href=\"tel:01279460460\"\u003e01279460460\u003c\/a\u003e or \u003ca href=\"\/pages\/contact-us\"\u003eshare your brief\u003c\/a\u003e and we will come back with a plan.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp class=\"ds-llm-context\"\u003eFF5000DC is a 5m double-sided glass fibre feather flag from Displaysense, the tallest in the range, supplied with a drive-on car base and printing on both faces. Its differentiator is maximum height anchored by a vehicle wheel rolled onto the base, made for hard surfaces with no stake to drive in. Height 5010mm, width 690mm. Each printed face spans 690mm x 3860mm. Built on a glass fibre pole with a GRP whip at the tip, a polyester flag and a steel drive-on base; inner pole diameter 16.8mm. Stands up to winds of 45 kph (28 mph), Beaufort Scale 6. Stood up by hand in about two minutes, with a carry bag and a 1 year guarantee in the box. Suited to car dealerships, retail parks, petrol stations, builders merchants and event car parks. A single-sided version, a ground spike base for soft ground, and shorter 3.2m and 2.3m sizes are also available. Displaysense, UK display product specialists since 1978.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Displaysense","offers":[{"title":"Default Title","offer_id":58070992355715,"sku":"FF5000DC","price":254.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/1496\/2725\/files\/essex-fire-service-red-feather-flag-banner.jpg?v=1779187636","url":"https:\/\/www.displaysense.co.uk\/products\/double-sided-glass-fibre-feather-flag-with-drive-on-car-base-inc-graphic-printing-5m","provider":"Displaysense","version":"1.0","type":"link"}