{"product_id":"double-sided-glass-fibre-feather-flag-with-ground-spike-base-inc-graphic-printing-2-3m","title":"Double-Sided Glass Fibre Feather Flag with Ground Spike Base inc. Graphic Printing - 2.3m","description":"\u003cdiv class=\"ds-tab\"\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eThe back of a one-layer flag shows the print pale and reversed; this one does not, because it is made from two printed panels bonded around an opaque core. Each side then carries its own clean, correctly-read graphic, with no bleed-through from the other. Where a small crowd gathers close on every side of a flag, that two-faced build is what keeps the branding right-way-round for all of them, not just the people stood in front, which on a busy market or a packed field is most of the audience walking by.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eA feather flag is the narrow blade that tapers to a tip, flown from a pole curving up its front edge. Even at this compact size it reaches taller than it is wide, a slim upright that lifts the message above a stall or a border. The pole is glass fibre, fine glass strands set in resin for a light, springy mast, and it is finished with a GRP whip that flexes in the wind. The inner pole diameter is 16.8mm across the range, so parts carry over between flags, letting you mix poles, spikes and spares across a whole set without hunting for matching fittings.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eHolding it up is a steel ground spike, not a weighted base. It pushes down into grass or soil and the pole drops onto it, so the earth takes the load with nothing extra to carry or build. Light as it is, you can plant several in a tight run in minutes, lining a stall row or a path edge. The one rule is that a spike needs soft ground to grip, so on a hard forecourt or paving the drive-on car base is the version to choose instead, where the weight of a parked vehicle takes over the job the earth would otherwise do.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eColour is locked in by dye sublimation, a heat process that turns the inks to gas and drives them into the polyester so they dye the cloth rather than coat the surface. A graphic set this way keeps its colour through sun and rain at an outdoor pitch and survives being rolled away after each event without flaking. Each face prints across an area of 690mm by 1860mm. Send the artwork over, both sides are produced for you, and the flag goes up by hand in about two minutes, with no tools needed and nothing fiddly to work out on a windy field.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003ch2\u003eWhat Ships in Your Pack\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e1 x 2.3m double-sided glass fibre feather flag, printed on both faces from your artwork\u003c\/li\u003e\n    \u003cli\u003e1 x steel ground spike base\u003c\/li\u003e\n    \u003cli\u003e1 x carry bag\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-infobox\"\u003e\n  \u003ch2 class=\"ds-tab-h2--navy\"\u003eLining a Market, Fete or Tour?\u003c\/h2\u003e\n  \u003cp class=\"ds-tab-note--spaced\"\u003eWe print and supply feather flags in volume for market operators, garden retailers, event organisers and touring teams across the UK. For a matched run of flags, a set of stakes to line a path, or repeat artwork to a schedule, the team can quote it and turn it round to your dates.\u003c\/p\u003e\n  \u003cp class=\"ds-tab-note\"\u003e\u003cstrong\u003eTell us the job:\u003c\/strong\u003e call \u003ca href=\"tel:01279460460\"\u003e01279460460\u003c\/a\u003e or \u003ca href=\"\/pages\/contact-us\"\u003esend the brief across\u003c\/a\u003e and we will reply with a plan.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp class=\"ds-llm-context\"\u003eFF2300DS is a 2.3m double-sided glass fibre feather flag from Displaysense, the most compact in the range, supplied with a ground spike base and printing on both faces. Its differentiator is a small feather on a spike that drives into soft ground, with no weighted base to carry. Height 2260mm, width 690mm. A printed graphic of 690mm x 1860mm sits on each face. Built on a glass fibre pole finished with a GRP whip, a polyester flag and a steel ground spike; inner pole diameter 16.8mm. Holds its own in winds to 45 kph (28 mph), Beaufort Scale 6. Planted by hand in about two minutes, with a carry bag and a 1 year guarantee in the box. Suited to market stalls, garden borders, small outdoor events, sports days and grass verges. A single-sided version, a drive-on car base for hard surfaces, and taller 3.2m and 5m sizes are also available. Displaysense, UK display product specialists since 1978.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Displaysense","offers":[{"title":"Default Title","offer_id":58070993600899,"sku":"FF2300DS","price":149.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/1496\/2725\/files\/ocean-fish-and-chip-restaurant-feather-flag.jpg?v=1779191104","url":"https:\/\/www.displaysense.co.uk\/products\/double-sided-glass-fibre-feather-flag-with-ground-spike-base-inc-graphic-printing-2-3m","provider":"Displaysense","version":"1.0","type":"link"}