{"product_id":"double-sided-glass-fibre-feather-flag-with-ground-spike-base-inc-graphic-printing-3-2m","title":"Double-Sided Glass Fibre Feather Flag with Ground Spike Base inc. Graphic Printing - 3.2m","description":"\u003cdiv class=\"ds-tab\"\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eBuild a flag from a single layer and the print reads backwards and washed out on the reverse. This one is made from two separately printed skins sealed either side of a blockout core, so both faces show a strong, true image with no see-through. Around a busy showground, where the audience arrives from every angle, that two-sided finish keeps the message the right way round for all of them rather than only the people facing the front, which is the whole reason to print both sides at a roaming outdoor event in the first place.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eThe feather flag is the tall blade that tapers toward the top, carried on a pole that curves up its leading edge. It is the shape that gives the most height for the least ground, a slim upright that reads from clear across a field. The pole is glass fibre, fine glass strands set in resin to stay light and springy, and it is tipped with a GRP whip that flexes in the wind. The inner pole diameter is 16.8mm right across the range, so parts carry over between flags, letting you mix poles, spikes and spares across a set without hunting for matching fittings.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eIt stands on a steel ground spike rather than a weighted base. The stake drives down into grass or soil and the pole drops onto it, so the earth itself holds the flag and there is no plate to carry or build. That keeps each unit light, which counts when you are planting a line of them along an entrance or a route. The catch is that a spike needs something to bite into, so on tarmac or paving the drive-on car base is the version that works instead, holding the same flag down with the weight of a parked vehicle rather than the grip of the earth.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003ePrinting is by dye sublimation, where heat turns the ink to gas and pushes it into the polyester so it stains the fibres themselves instead of lying on the surface. A graphic set in this way holds its colour through sun and rain at an outdoor pitch and survives being rolled away after each event without flaking. Each face prints across an area of 605mm by 2620mm. Supply the artwork, both sides are produced for you, and the flag goes up by hand in about two minutes, with no tools to find and no fixings to lose out on a windy field.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003ch2\u003eWhat Ships in Your Pack\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e1 x 3.2m double-sided glass fibre feather flag, printed on both faces from your artwork\u003c\/li\u003e\n    \u003cli\u003e1 x steel ground spike base\u003c\/li\u003e\n    \u003cli\u003e1 x carry bag\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-infobox\"\u003e\n  \u003ch2 class=\"ds-tab-h2--navy\"\u003ePlanting a Whole Row or a Tour?\u003c\/h2\u003e\n  \u003cp class=\"ds-tab-note--spaced\"\u003eWe print and supply feather flags in volume for event crews, garden retailers, sports clubs and roadshow teams across the UK. For a matched run of flags, a set of stakes for an entrance, or repeat artwork to a fixture list, the team can quote it and turn it round to your dates.\u003c\/p\u003e\n  \u003cp class=\"ds-tab-note\"\u003e\u003cstrong\u003eTell us the job:\u003c\/strong\u003e call \u003ca href=\"tel:01279460460\"\u003e01279460460\u003c\/a\u003e or \u003ca href=\"\/pages\/contact-us\"\u003esend the brief over\u003c\/a\u003e and we will reply with a plan.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp class=\"ds-llm-context\"\u003eFF3200DS is a 3.2m double-sided glass fibre feather flag from Displaysense, supplied with a ground spike base and printing on both faces. Its differentiator is a mid-height feather on a spike that drives into soft ground, with no weighted base to carry. Height 3200mm, width 605mm. Each printed face spans 605mm x 2620mm. Made from a glass fibre pole carrying a GRP whip, a polyester flag and a steel ground spike; inner pole diameter 16.8mm. Rides out winds to 45 kph (28 mph), Beaufort Scale 6. Pitches by hand in about two minutes, with a carry bag and a 1 year guarantee in the box. Suited to outdoor events, garden centres, sports clubs, festivals and open days. A single-sided version, a drive-on car base for hard surfaces, and taller 5m and shorter 2.3m sizes are also available. Displaysense, UK display product specialists since 1978.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Displaysense","offers":[{"title":"Default Title","offer_id":58070992257411,"sku":"FF3200DS","price":169.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/1496\/2725\/files\/homesense-outdoor-promotional-feather-flag-display.jpg?v=1779184671","url":"https:\/\/www.displaysense.co.uk\/products\/double-sided-glass-fibre-feather-flag-with-ground-spike-base-inc-graphic-printing-3-2m","provider":"Displaysense","version":"1.0","type":"link"}