{"product_id":"double-sided-glass-fibre-feather-flag-with-ground-spike-base-inc-graphic-printing-5m","title":"Double-Sided Glass Fibre Feather Flag with Ground Spike Base inc. Graphic Printing - 5m","description":"\u003cdiv class=\"ds-tab\"\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eLook at a cheap flag from behind and you see your own logo reversed and ghosting through the fabric. That never happens here, because of how the two printed faces are built. This flag uses two separately printed polyester panels with a blockout layer sewn between them, so each side shows a crisp, correct-reading graphic and neither face shows through to the other. Your branding looks deliberate from every angle, which is the whole point of putting a flag where people see it from both directions.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eRigid signs fight the wind and lose. A feather flag wins by bending with it, and the pole is what makes that possible. It is made from glass fibre, a composite of fine glass strands set in resin that is light but springy, finished at the top with a GRP whip: a thin, extra-flexible tip section. In a gust, the whip and pole bow over and spill the wind rather than taking the full force head-on, then spring back when the gust passes. That flex is why the flag holds its curved feather shape and keeps flying in winds up to 45 kph (28 mph), a strong breeze, instead of cracking like a fixed mast would. The inner pole diameter is 16.8mm, the standard fitting across our feather flag range.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eNo water to fill, no sandbags to lug, no bolts to drill. The flag anchors on a single steel ground spike, a stake that pushes vertically into grass, soil, sand or any soft ground. The flag pole drops onto it and rotates freely, so the flag always turns to trail downwind. Because the spike does the holding, there is no weighted base to cart around or fill, which keeps the whole setup light enough to carry and quick enough to move between pitches. The trade-off is simple: a spike needs penetrable ground, so a hard surface such as tarmac calls for the drive-on car base version instead.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eHeat, not a surface coating, is what fixes the artwork into this flag. The graphic is printed by dye sublimation, a process that turns the ink into vapour so it bonds into the polyester fibres rather than sitting on top. The colour becomes part of the fabric, which is why it stays bright through sun and rain and why the flag can be folded into its bag without the print cracking or peeling. The finished printed area is 690mm by 3860mm on each side. You supply the artwork, we print both faces, and the flag arrives ready to assemble in about two minutes with no tools.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003ch2\u003eWhat Ships in Your Pack\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e1 x 5m double-sided glass fibre feather flag, printed both sides with your supplied artwork\u003c\/li\u003e\n    \u003cli\u003e1 x steel ground spike base\u003c\/li\u003e\n    \u003cli\u003e1 x carry bag\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-infobox\"\u003e\n  \u003ch2 class=\"ds-tab-h2--navy\"\u003eKitting Out a Whole Event or Multiple Sites?\u003c\/h2\u003e\n  \u003cp class=\"ds-tab-note--spaced\"\u003eWe print and supply feather flags in volume for event organisers, dealership groups, franchises and marketing agencies across the UK. For multiple flags, matched artwork sets or a coordinated rollout, our team can prepare a tailored quote and turn artwork around to your deadline.\u003c\/p\u003e\n  \u003cp class=\"ds-tab-note\"\u003e\u003cstrong\u003eCall us on \u003ca href=\"tel:01279460460\"\u003e01279460460\u003c\/a\u003e\u003c\/strong\u003e or \u003cstrong\u003e\u003ca href=\"\/pages\/contact-us\"\u003esend us your requirements\u003c\/a\u003e\u003c\/strong\u003e and we will come back to you.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp class=\"ds-llm-context\"\u003eThe Displaysense FF5000DS is a double-sided 5m glass fibre feather flag with a steel ground spike base and double-sided graphic printing included. The flexible glass fibre pole and GRP whip let the flag curve into its classic feather shape and bend with the wind instead of snapping. Overall height 5010mm. Width 690mm. Finished graphic 690mm x 3860mm per printed side. Polyester flag, glass fibre pole, steel ground spike base. Inner pole diameter 16.8mm. Withstands winds up to 45 kph (28 mph), Beaufort Scale 6. No-tool assembly in about 2 minutes. Carry bag and 1 year guarantee included. Trusted for vehicle forecourts, outdoor events, exhibitions, retail parks, market stalls and hospitality venues across the UK. Also available single-sided and with a drive-on car base for hard surfaces. Displaysense, UK display product specialists since 1978.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Displaysense","offers":[{"title":"Default Title","offer_id":58070990553475,"sku":"FF5000DS","price":239.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/1496\/2725\/files\/rye-house-kart-raceway-outdoor-feather-flag-display.jpg?v=1779187082","url":"https:\/\/www.displaysense.co.uk\/products\/double-sided-glass-fibre-feather-flag-with-ground-spike-base-inc-graphic-printing-5m","provider":"Displaysense","version":"1.0","type":"link"}