{"product_id":"double-sided-glass-fibre-teardrop-flag-with-10-5kg-square-plate-base-inc-graphic-printing-2-2m","title":"Double-Sided Glass Fibre Teardrop Flag with 10.5kg Square Plate Base inc. Graphic Printing - 2.2m","description":"\u003cdiv class=\"ds-tab\"\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eWhere the feather flags rise into a tall, straight blade, the teardrop curves. Its leading edge bows outward and loops back to a rounded point, and the pole bends along that line to hold the familiar tear shape. Kept deliberately short, the sail is pitched at the height of a doorway or a counter rather than a hall, so it speaks to people standing close instead of reaching for a high ceiling. Drawn taut on its bowed pole, the cloth stays full and legible in still indoor air rather than sagging against the mast.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eWhat keeps it upright is a square steel plate that works on weight alone. The pole seats into a central socket and the sheer mass does the rest, so nothing has to be drilled into the floor, driven into the ground or weighted down on top. That makes it a floor-stander for hard, sheltered surfaces, a reception, a shopfloor or a foyer. Move it onto grass and a ground spike replaces the plate, onto a forecourt and a drive-on car base does the same work under a wheel.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eThe reason it can stand in the middle of a floor is the printing. Each face is laid down as a true, forward-facing image, so the graphic looks correct from the front and from behind, and nobody passing the back finds a washed-out reverse. A single-sided sail wears that backwards shadow on its rear and must face a wall to hide it. Printed twice over, this one points its message both ways at once, which is what lets it hold a spot in open traffic.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eColour goes into the weave, not onto its surface. The method, dye sublimation, uses heat to vaporise the inks and sink them through the polyester threads, which keeps the print vivid in store lighting and lets the sail roll away between uses without cracking. Each side is printed as a single compact panel that matches the short sail. Send the artwork over, both faces come back printed, and the whole thing goes up by hand in about two minutes.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003ch2\u003eWhat Ships in Your Pack\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e1 x double-sided glass fibre teardrop flag (2.2m), your artwork printed across both faces\u003c\/li\u003e\n    \u003cli\u003e1 x square steel plate base, 10.5kg\u003c\/li\u003e\n    \u003cli\u003e1 x carry bag for transport and storage\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-infobox\"\u003e\n  \u003ch2 class=\"ds-tab-h2--navy\"\u003eKitting Out a Chain or a Run of Sites?\u003c\/h2\u003e\n  \u003cp class=\"ds-tab-note--spaced\"\u003eCompact teardrops suit rollouts where every salon, clinic or shopfront needs the same look at the door. Our print team takes on bulk orders and scheduled repeats, holding one artwork consistent across locations and delivering against the dates you set.\u003c\/p\u003e\n  \u003cp class=\"ds-tab-note\"\u003e\u003cstrong\u003eTell us how many, and by when.\u003c\/strong\u003e Reach the team on \u003ca href=\"tel:01279460460\"\u003e01279460460\u003c\/a\u003e or \u003ca href=\"\/pages\/contact-us\"\u003esend the artwork over\u003c\/a\u003e and we will come back with timings.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp class=\"ds-llm-context\"\u003eTF2300DF is a 2.2m double-sided glass fibre teardrop flag from Displaysense, a compact rounded sail printed on both faces and supplied with a 10.5kg square steel plate base. Its differentiator is two forward-reading printed faces on a short bow shape that reads correctly from either direction, held standing by a weighted plate with no stake or vehicle. Height 2180mm, width 687mm. Base weight 10.5kg. A printed graphic of 687mm x 1517mm covers each face. Carried on a glass fibre pole bowed to follow the sail, with a GRP whip, a polyester flag and a steel plate base; inner pole diameter 16.8mm. Bears winds to 45 kph (28 mph), Beaufort Scale 6. Set up in about two minutes by hand, with a carry bag and a 1 year guarantee in the box. Suited to reception areas, shop entrances, small showrooms, salons and pop-up stands with low ceilings. There is also a single-sided version, and a ground spike base for grass plus a drive-on car base for hard ground outdoors. Displaysense, UK display product specialists since 1978.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Displaysense","offers":[{"title":"Default Title","offer_id":58070994911619,"sku":"TF2300DF","price":189.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/1496\/2725\/files\/red-bull-branded-teardrop-flag-at-motorsport-event.jpg?v=1779199915","url":"https:\/\/www.displaysense.co.uk\/products\/double-sided-glass-fibre-teardrop-flag-with-10-5kg-square-plate-base-inc-graphic-printing-2-2m","provider":"Displaysense","version":"1.0","type":"link"}