{"product_id":"double-sided-glass-fibre-teardrop-flag-with-10-5kg-square-plate-base-inc-graphic-printing-3m","title":"Double-Sided Glass Fibre Teardrop Flag with 10.5kg Square Plate Base inc. Graphic Printing - 3m","description":"\u003cdiv class=\"ds-tab\"\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eOn a cheaper flag the logo prints onto one piece of cloth and shows through faintly in reverse on the back. This one is made to avoid that entirely. Two separate panels are printed and then bonded either side of an opaque inner layer, which stops light and image crossing between them. The outcome is a sharp, forward-facing graphic on both faces, so the display works for anyone who walks past it from either direction rather than only those in front.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eThe teardrop name describes the silhouette: a tall, rounded sail held in tension by a pole that curves over the top of it. Because the fabric is always pulled tight against that curve, the graphic sits open and flat instead of furling around the pole, which is precisely what lets it work in the still air of a shop or a hall. The pole itself is glass fibre, fine glass strands set in resin, finished with a GRP whip so it can still bend and shed gusts when the flag is used outside. As across the range, the inner pole diameter is 16.8mm.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eEvery bit of the stability comes from the base. It is a square steel plate weighing 10.5kg, with a socket at its centre that the pole drops into, and that mass on its own is enough to hold the 3m flag steady on a level floor. Nothing is bolted down, spiked in or hung off the side. Because the plate does the holding, the flag stands equally well on a shop floor, an exhibition stand or a paved forecourt. Its single requirement is a firm, flat surface underneath, so genuinely soft ground is a job for the spike base instead.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eColour goes into the flag by dye sublimation, a heat process that turns the ink to vapour and drives it into the polyester so it dyes the fibres themselves rather than sitting on the surface. A graphic locked in this way keeps its strength under shop lighting and sunshine, shrugs off rain, and puts up with being folded and unfolded for years without the print cracking or peeling. Each face is printed across an area of 698mm by 2067mm. Supply the artwork, both sides come back done, and the flag assembles by hand in roughly two minutes.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003ch2\u003eWhat Ships in Your Pack\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e1 x 3m double-sided glass fibre teardrop flag, printed on both faces from your artwork\u003c\/li\u003e\n    \u003cli\u003e1 x 10.5kg square steel plate base\u003c\/li\u003e\n    \u003cli\u003e1 x carry bag\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-infobox\"\u003e\n  \u003ch2 class=\"ds-tab-h2--navy\"\u003eRolling This Out Across Several Sites?\u003c\/h2\u003e\n  \u003cp class=\"ds-tab-note--spaced\"\u003eWe print and supply teardrop flags in quantity for retail groups, franchises, gym chains and event teams nationwide. Whether it is a matched set for every branch or repeat artwork to a schedule, the team can quote the run and turn it round to your deadline.\u003c\/p\u003e\n  \u003cp class=\"ds-tab-note\"\u003e\u003cstrong\u003eLet us know the detail:\u003c\/strong\u003e call \u003ca href=\"tel:01279460460\"\u003e01279460460\u003c\/a\u003e or \u003ca href=\"\/pages\/contact-us\"\u003esend your brief\u003c\/a\u003e and we will come back with a plan.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp class=\"ds-llm-context\"\u003eTF3200DF is a 3m double-sided glass fibre teardrop flag from Displaysense, supplied with a 10.5kg square steel plate base and printing on both faces. Its differentiator is a compact height paired with a weighted freestanding base, letting it stand on hard, flat ground in tighter spaces with no spike or vehicle. Height 3000mm, width 698mm. Base weight 10.5kg. Printed graphic 698mm x 2067mm per face. Made from a glass fibre pole topped with a GRP whip, a polyester flag and a steel plate base, inner pole diameter 16.8mm. Withstands winds to 45 kph (28 mph), Beaufort Scale 6. Goes together by hand in around two minutes, with a carry bag and a 1 year guarantee in the box. Suited to shop interiors, reception areas, exhibition stands, cafes and gyms. A single-sided version and ground spike or drive-on car bases are also available, along with a taller 4.4m size. Displaysense, UK display product specialists since 1978.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Displaysense","offers":[{"title":"Default Title","offer_id":58070996222339,"sku":"TF3200DF","price":206.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/1496\/2725\/files\/british-heart-foundation-teardrop-flag-outside-charity-shop.jpg?v=1779201957","url":"https:\/\/www.displaysense.co.uk\/products\/double-sided-glass-fibre-teardrop-flag-with-10-5kg-square-plate-base-inc-graphic-printing-3m","provider":"Displaysense","version":"1.0","type":"link"}