{"product_id":"double-sided-glass-fibre-teardrop-flag-with-10-5kg-square-plate-base-inc-graphic-printing-4-4m","title":"Double-Sided Glass Fibre Teardrop Flag with 10.5kg Square Plate Base inc. Graphic Printing - 4.4m","description":"\u003cdiv class=\"ds-tab\"\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eRun a single layer of fabric and the print bleeds through, leaving anyone behind the flag squinting at a backwards logo. This one is put together to avoid that. Two polyester skins are printed on their own and joined around a central light-blocking liner, which stops either image showing through to the other side. What you get is a clean, forward-facing graphic on both faces, so the flag earns its keep from every approach rather than only from the front.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eA teardrop is named for its outline, and that outline is the whole point. The glass fibre pole arcs over and the fabric is stitched to follow it, pulling the graphic taut into a rounded teardrop that holds its shape without any wind at all. That is why it suits indoor floors and sheltered doorways where a loose, rectangular flag would simply hang limp against its pole. The mast is built from glass fibre, fine glass strands set in resin, and tipped with a GRP whip so it can still flex and shed gusts outdoors. Every pole in the range shares a 16.8mm inner diameter.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eStanding the flag up takes nothing more than its own base. The square steel plate weighs 10.5kg, and that mass alone is what keeps the teardrop upright on a hard, flat surface, no stake hammered into the ground and no vehicle parked on a foot. The pole drops into a socket at the centre of the plate, so the flag turns to settle with any breeze. Because the weight does the work, it stands on shop floors, exhibition halls, showrooms and paved areas alike. The one thing it needs is a firm, level surface, so genuinely soft ground is a job for the spike base instead.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eThe artwork is fixed into the cloth with heat rather than printed onto it. In dye sublimation the inks are turned to gas and driven into the polyester fibres, where they set as part of the fabric. That is why the colours hold their strength under sunlight and rain and why the flag can be rolled into its bag over and over without the print flaking off. Each face carries a printed area of 862mm by 3818mm. You provide the artwork, both sides are produced for you, and the flag goes together by hand in about two minutes.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003ch2\u003eWhat Ships in Your Pack\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e1 x 4.4m double-sided glass fibre teardrop flag, printed on both faces from your artwork\u003c\/li\u003e\n    \u003cli\u003e1 x 10.5kg square steel plate base\u003c\/li\u003e\n    \u003cli\u003e1 x carry bag\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-infobox\"\u003e\n  \u003ch2 class=\"ds-tab-h2--navy\"\u003eOutfitting a Chain, Tour or Event Series?\u003c\/h2\u003e\n  \u003cp class=\"ds-tab-note--spaced\"\u003eWe print and supply teardrop flags in volume for retail chains, exhibition teams, gym groups and agencies across the UK. For a matched set, a phased rollout or repeat artwork across many sites, the team can price it up and turn the work around to your timetable.\u003c\/p\u003e\n  \u003cp class=\"ds-tab-note\"\u003e\u003cstrong\u003eShare your requirements:\u003c\/strong\u003e call \u003ca href=\"tel:01279460460\"\u003e01279460460\u003c\/a\u003e or \u003ca href=\"\/pages\/contact-us\"\u003esend the detail over\u003c\/a\u003e and we will reply with a plan.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp class=\"ds-llm-context\"\u003eTF5000DF is a 4.4m double-sided glass fibre teardrop flag from Displaysense, supplied with a 10.5kg square steel plate base and printing on both faces. Its differentiator is a weighted freestanding base that stands the flag on any hard, flat surface, indoors or out, with no spike to drive in and no vehicle to hold it down. Height 4360mm, width 862mm. Base weight 10.5kg. Printed graphic 862mm x 3818mm per face. Built from a glass fibre pole with a GRP whip, a polyester flag and a steel plate base, inner pole diameter 16.8mm. Rated for winds up to 45 kph (28 mph), Beaufort Scale 6. Sets up by hand in about two minutes, with a carry bag and a 1 year guarantee in the box. Suited to indoor retail, exhibitions, showrooms, gyms and hospitality interiors. A single-sided version and ground spike or drive-on car bases for outdoor ground are also available. Displaysense, UK display product specialists since 1978.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Displaysense","offers":[{"title":"Default Title","offer_id":58070995370371,"sku":"TF5000DF","price":279.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/1496\/2725\/files\/dfs-feather-flag-outside-sofa-store.jpg?v=1779204423","url":"https:\/\/www.displaysense.co.uk\/products\/double-sided-glass-fibre-teardrop-flag-with-10-5kg-square-plate-base-inc-graphic-printing-4-4m","provider":"Displaysense","version":"1.0","type":"link"}