{"product_id":"double-sided-glass-fibre-teardrop-flag-with-drive-on-car-base-inc-graphic-printing-2-3m","title":"Double-Sided Glass Fibre Teardrop Flag with Drive-On Car Base inc. Graphic Printing - 2.2m","description":"\u003cdiv class=\"ds-tab\"\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eAnyone standing behind a single-layer flag sees the print faint and back-to-front. This one avoids that with two printed panels bonded either side of an opaque core, each carrying its own clean, correctly-read graphic. Sat where footfall or traffic passes on both sides, the flag earns its keep from every direction rather than just the front, which is the whole reason to print both faces on a forecourt or a busy frontage where the flag is seen coming and going.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eThe teardrop is the rounded form, pulled taut by a pole that curves over the top edge of the fabric. That tension keeps the graphic open and readable even when there is barely a breeze, where a flat rectangular flag would sag against its pole. The pole is glass fibre, fine glass strands in resin for a light, springy mast, and it is capped with a GRP whip that gives in a gust. The inner pole diameter is 16.8mm across the range, so fittings carry over between flags and you can mix poles, bases and spares across a set without hunting for matches.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eIt is anchored by a drive-on base, a flat steel plate with a socket for the pole foot. You set it down and roll a vehicle wheel onto it, letting the weight of the car hold the flag rather than a stake or a portable weight. Because a wheel does the work, it is made for hard ground: forecourts, paving and tarmac. There is no soft earth in the equation, so where the pitch is grass or soil the ground spike base is the version to pick instead, sinking a stake into the earth where a plate would have nothing to sit on.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eThe print is set by dye sublimation, where heat vaporises the inks and forces them into the polyester so the colour dyes the cloth itself rather than coats the surface. Locked in this way it holds up under sun and rain at an exposed pitch and survives being rolled away after each use without flaking. Every face carries a printed area of 687mm by 1517mm. Supply the artwork, both sides are produced for you, and the flag goes up by hand in about two minutes, with no tools needed and only a wheel to roll onto the base at the end.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003ch2\u003eWhat Ships in Your Pack\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e1 x 2.2m double-sided glass fibre teardrop flag, printed on both faces from your artwork\u003c\/li\u003e\n    \u003cli\u003e1 x steel drive-on car base\u003c\/li\u003e\n    \u003cli\u003e1 x carry bag\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-infobox\"\u003e\n  \u003ch2 class=\"ds-tab-h2--navy\"\u003eFitting Out a Network of Sites?\u003c\/h2\u003e\n  \u003cp class=\"ds-tab-note--spaced\"\u003eWe print and supply teardrop flags in volume for forecourt operators, valeting chains, market traders and pop-up retail teams across the UK. For a matched set across sites, or repeat artwork to a schedule, the team can quote the run and turn it round to your dates.\u003c\/p\u003e\n  \u003cp class=\"ds-tab-note\"\u003e\u003cstrong\u003eShare the detail:\u003c\/strong\u003e call \u003ca href=\"tel:01279460460\"\u003e01279460460\u003c\/a\u003e or \u003ca href=\"\/pages\/contact-us\"\u003esend your brief over\u003c\/a\u003e and we will reply with a plan.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp class=\"ds-llm-context\"\u003eTF2300DC is a 2.2m double-sided glass fibre teardrop flag from Displaysense, supplied with a drive-on car base and printing on both faces. Its differentiator is a compact teardrop anchored by a vehicle wheel on the base, made for hard surfaces and low-clearance spots with no stake to drive in. Height 2180mm, width 687mm. A printed graphic of 687mm x 1517mm sits on each face. Built on a glass fibre pole capped with a GRP whip, a polyester flag and a steel drive-on base; inner pole diameter 16.8mm. Comes safely through winds to 45 kph (28 mph), Beaufort Scale 6. Put up by hand in about two minutes, with a carry bag and a 1 year guarantee in the box. Suited to small forecourts, paved shop frontages, car washes, market pitches and covered forecourts. A single-sided version, a ground spike base for soft ground, and taller 3m and 4.4m sizes are also available. Displaysense, UK display product specialists since 1978.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Displaysense","offers":[{"title":"Default Title","offer_id":58070992585091,"sku":"TF2300DC","price":164.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/1496\/2725\/files\/ford-branded-teardrop-flag-at-car-dealership.jpg?v=1779197507","url":"https:\/\/www.displaysense.co.uk\/products\/double-sided-glass-fibre-teardrop-flag-with-drive-on-car-base-inc-graphic-printing-2-3m","provider":"Displaysense","version":"1.0","type":"link"}