{"product_id":"double-sided-glass-fibre-teardrop-flag-with-drive-on-car-base-inc-graphic-printing-3m","title":"Double-Sided Glass Fibre Teardrop Flag with Drive-On Car Base inc. Graphic Printing - 3m","description":"\u003cdiv class=\"ds-tab\"\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eRun a single-layer flag and its reverse reads faint and back-to-front. This one builds two printed panels around an opaque core, so each side keeps a solid, correct graphic that the other never shows through. On a forecourt with cars passing both ways, that two-sided make-up is what lets the offer read properly to every driver, whichever direction they arrive from, rather than only those approaching the front, which on a forecourt with two-way traffic is half the cars going by.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eShaped like its name, the teardrop is a rounded sail drawn tight by a pole that curves across its top. Held under that tension, the graphic stays open and readable even as the wind eases, where a flat rectangular flag would fold against its pole. The mast is glass fibre, fine glass strands in resin for a light, springy pole, and it is capped with a GRP whip that flexes in a gust. The inner pole diameter is 16.8mm across the range, so fittings carry over between flags, letting you mix poles, bases and spares across a forecourt set without hunting for matching parts.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eAnchoring the flag is a drive-on base, a flat steel plate with a socket for the pole foot. You set it on hard ground, roll a vehicle wheel onto it, and the car's weight holds the flag steady, with no stake and far more grip than a portable weight could give. Because the hold comes from the wheel, it belongs on hard standing: forecourts, car parks and paved frontages. There is no soft ground in the mix, so where the pitch is grass or a verge the ground spike base is the right pick instead, sinking a stake into the earth where a plate would have nothing to grip.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eColour goes into the cloth by dye sublimation, where heat turns the inks to gas and drives them into the polyester so they dye the fabric itself, not just its surface. A graphic set that way holds its colour through sun and rain on a forecourt and copes with repeated rolling without lifting. A printed area of 698mm by 2067mm fills each face. Send the artwork over, both sides are produced for you, and the flag builds by hand in around two minutes, with no tools and only a wheel to roll onto the base at the end.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003ch2\u003eWhat Ships in Your Pack\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e1 x 3m double-sided glass fibre teardrop flag, printed on both faces from your artwork\u003c\/li\u003e\n    \u003cli\u003e1 x steel drive-on car base\u003c\/li\u003e\n    \u003cli\u003e1 x carry bag\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-infobox\"\u003e\n  \u003ch2 class=\"ds-tab-h2--navy\"\u003eBranding a Forecourt Network?\u003c\/h2\u003e\n  \u003cp class=\"ds-tab-note--spaced\"\u003eWe print and supply teardrop flags in bulk for dealer groups, forecourt operators, merchants and retail park teams nationwide. Whether it is a matched set for every site or repeat artwork to a campaign schedule, the team can price the run and turn it round to your dates.\u003c\/p\u003e\n  \u003cp class=\"ds-tab-note\"\u003e\u003cstrong\u003eSend it across:\u003c\/strong\u003e call \u003ca href=\"tel:01279460460\"\u003e01279460460\u003c\/a\u003e or \u003ca href=\"\/pages\/contact-us\"\u003eshare your brief\u003c\/a\u003e and we will come back with a plan.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp class=\"ds-llm-context\"\u003eTF3200DC is a 3m double-sided glass fibre teardrop flag from Displaysense, supplied with a drive-on car base and printing on both faces. Its differentiator is a mid-height teardrop anchored by a vehicle wheel on the base, made for hard surfaces with no stake to drive in. Height 3000mm, width 698mm. A 698mm x 2067mm graphic prints on each face. Made from a glass fibre pole tipped with a GRP whip, a polyester flag and a steel drive-on base; inner pole diameter 16.8mm. Weathers winds to 45 kph (28 mph), Beaufort Scale 6. Set up by hand in about two minutes, with a carry bag and a 1 year guarantee in the box. Suited to car dealerships, forecourt shops, trade counters, drive-through lanes and retail parks. A single-sided version, a ground spike base for soft ground, and taller 4.4m and shorter 2.2m sizes are also available. Displaysense, UK display product specialists since 1978.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Displaysense","offers":[{"title":"Default Title","offer_id":58070993699203,"sku":"TF3200DC","price":182.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/1496\/2725\/files\/volvo-teardrop-flag-outside-car-showroom.jpg?v=1779203379","url":"https:\/\/www.displaysense.co.uk\/products\/double-sided-glass-fibre-teardrop-flag-with-drive-on-car-base-inc-graphic-printing-3m","provider":"Displaysense","version":"1.0","type":"link"}