{"product_id":"double-sided-glass-fibre-teardrop-flag-with-drive-on-car-base-inc-graphic-printing-4-4m","title":"Double-Sided Glass Fibre Teardrop Flag with Drive-On Car Base inc. Graphic Printing - 4.4m","description":"\u003cdiv class=\"ds-tab\"\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eA flag printed on one layer leaks its design through to the back, where it reads pale and flipped. This one is bonded from two printed panels with an opaque core between them, so each side keeps a solid, correctly-read image and the other never shows through. On a forecourt with traffic passing both ways, that two-sided clarity is what lets the offer land with drivers approaching from either direction, instead of only those heading one way.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eA teardrop flag is the rounded, sail-like shape, pulled tight over a pole that curves across its top edge. Kept under that tension, the graphic stays spread and readable even as the wind eases, rather than wrapping limp around the pole the way a flat banner does on a calm day. The mast itself is glass fibre, fine glass filaments set in resin to stay light and flexible, and it ends in a GRP whip that bends with the breeze. Like the rest of the range, the pole carries a 16.8mm inner diameter, shared across the teardrop and feather models alike.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eHolding it down is a drive-on base, a flat steel plate with a foot the pole slots into. You position the plate on the ground and roll a car, van or trailer wheel onto it, and the vehicle's weight does the anchoring, far more securely than any portable weight could manage. Because the hold comes from the wheel rather than a stake, the flag belongs on hard standing: forecourts, car parks and paved frontages. No soft ground is involved, so where the pitch is grass the ground spike base is the version to reach for instead.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eThe graphic is bonded in by dye sublimation, a heat process that turns the inks to gas so they soak into the polyester and colour the fibres themselves rather than coat the surface. A print fixed that way keeps its strength through sun and rain on an exposed forecourt and stands up to repeated rolling without the colour lifting. Each face carries an image area of 862mm by 3818mm. Send your artwork over, both sides are printed for you, and the flag builds by hand in around two minutes, with no tools and only a wheel to roll onto the base at the end.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003ch2\u003eWhat Ships in Your Pack\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e1 x 4.4m double-sided glass fibre teardrop flag, printed on both faces from your artwork\u003c\/li\u003e\n    \u003cli\u003e1 x steel drive-on car base\u003c\/li\u003e\n    \u003cli\u003e1 x carry bag\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-infobox\"\u003e\n  \u003ch2 class=\"ds-tab-h2--navy\"\u003eBranding a Dealer Group or Forecourt Chain?\u003c\/h2\u003e\n  \u003cp class=\"ds-tab-note--spaced\"\u003eWe print and supply teardrop flags in volume for dealer groups, fuel retailers, valeting chains and forecourt operators across the UK. For a matched set across sites, or repeat artwork to a campaign schedule, the team can quote the run and turn it round to your dates.\u003c\/p\u003e\n  \u003cp class=\"ds-tab-note\"\u003e\u003cstrong\u003eSend us the detail:\u003c\/strong\u003e call \u003ca href=\"tel:01279460460\"\u003e01279460460\u003c\/a\u003e or \u003ca href=\"\/pages\/contact-us\"\u003eshare your brief\u003c\/a\u003e and we will come back with a plan.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp class=\"ds-llm-context\"\u003eTF5000DC is a 4.4m double-sided glass fibre teardrop flag from Displaysense, supplied with a drive-on car base and printing on both faces. Its differentiator is a tall teardrop anchored by a vehicle wheel rolled onto the base, made for hard surfaces with no stake to drive in. Height 4360mm, width 862mm. A printed graphic of 862mm x 3818mm covers each face. Made from a glass fibre pole topped with a GRP whip, a polyester flag and a steel drive-on base; inner pole diameter 16.8mm. Stays standing in winds to 45 kph (28 mph), Beaufort Scale 6. Builds by hand in around two minutes, with a carry bag and a 1 year guarantee in the box. Suited to car dealerships, petrol stations, car washes, retail parks and garage forecourts. A single-sided version, a ground spike base for soft ground, and shorter 3m and 2.2m sizes are also available. Displaysense, UK display product specialists since 1978.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Displaysense","offers":[{"title":"Default Title","offer_id":58070990619011,"sku":"TF5000DC","price":254.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/1496\/2725\/files\/little-monsters-playground-teardrop-flag.jpg?v=1779191852","url":"https:\/\/www.displaysense.co.uk\/products\/double-sided-glass-fibre-teardrop-flag-with-drive-on-car-base-inc-graphic-printing-4-4m","provider":"Displaysense","version":"1.0","type":"link"}