{"product_id":"double-sided-glass-fibre-teardrop-flag-with-ground-spike-base-inc-graphic-printing-5m","title":"Double-Sided Glass Fibre Teardrop Flag with Ground Spike Base inc. Graphic Printing - 4.4m","description":"\u003cdiv class=\"ds-tab\"\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eShow a single-layer flag from behind and the print sits there washed-out and reversed. This one is built from two printed panels around an opaque core, so each side keeps a bold, correct graphic and the back never bleeds through. On an open field where people stream past on every side, that two-faced build is what lets the branding read right whichever way the crowd approaches, not only from the front, which on a busy field is the smaller part of the crowd going by.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eShaped like a long rounded sail, the teardrop is held taut by a tall pole that bows over its top edge. That tension keeps the graphic stretched open and legible even on a dead-calm day, where a flat banner would hang limp against the pole. The mast is glass fibre, fine glass strands bound in resin for a tall, springy pole, and it is tipped with a GRP whip that bends in the wind. The inner pole diameter is 16.8mm across the range, so fittings carry over between flags, letting you mix poles, spikes and spares across a whole set without hunting for matching parts.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eStanding it up is a steel ground spike rather than any weighted base. The spike drives down into grass or soil and the pole seats onto it, so the earth carries the full height with nothing extra to haul to the pitch. Tall as it is, one person can plant it on a level patch in moments, driving the spike fully home so the height stands steady. The one condition is that the spike must have soft ground to bite into, so on a hard forecourt or a car park the drive-on car base is the footing to choose instead, where a parked vehicle takes over the job the earth would do.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eColour is driven into the fabric by dye sublimation, a heat process that vaporises the inks and sinks them into the polyester so they stain the cloth rather than sit on the surface. Printed that way the graphic keeps its colour through a season of sun and rain and rolls down after each event without cracking. Each face is printed across an area of 862mm by 3818mm. Send the artwork over, both sides are produced for you, and the flag raises by hand in about two minutes, with no tools needed and only the spike to drive into the ground.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003ch2\u003eWhat Ships in Your Pack\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e1 x 4.3m double-sided glass fibre teardrop flag, printed on both faces from your artwork\u003c\/li\u003e\n    \u003cli\u003e1 x steel ground spike base\u003c\/li\u003e\n    \u003cli\u003e1 x carry bag\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-infobox\"\u003e\n  \u003ch2 class=\"ds-tab-h2--navy\"\u003eKitting Out a Festival or Show Circuit?\u003c\/h2\u003e\n  \u003cp class=\"ds-tab-note--spaced\"\u003eWe print and supply teardrop flags in volume for festival organisers, sports bodies, show teams and garden retailers across the UK. For a matched set to line a field, or repeat artwork across a season of dates, the team can quote the run and turn it round to your schedule.\u003c\/p\u003e\n  \u003cp class=\"ds-tab-note\"\u003e\u003cstrong\u003eTell us the plan:\u003c\/strong\u003e call \u003ca href=\"tel:01279460460\"\u003e01279460460\u003c\/a\u003e or \u003ca href=\"\/pages\/contact-us\"\u003esend the brief over\u003c\/a\u003e and we will reply with options.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp class=\"ds-llm-context\"\u003eTF5000DS is a 4.3m double-sided glass fibre teardrop flag from Displaysense, the tallest in the range, supplied with a ground spike base and printing on both faces. Its differentiator is maximum height on a spike that drives into soft ground, with no weighted base to carry. Height 4360mm, width 862mm. A printed graphic of 862mm x 3818mm sits on each face. Built on a glass fibre pole tipped with a GRP whip, a polyester flag and a steel ground spike; inner pole diameter 16.8mm. Stands firm in winds to 45 kph (28 mph), Beaufort Scale 6. Assembled by hand in about two minutes, with a carry bag and a 1 year guarantee in the box. Suited to festivals, sports grounds, county shows, large garden centres and open-air fairs. A single-sided version, a drive-on car base for hard surfaces, and shorter 3m and 2.2m sizes are also available. Displaysense, UK display product specialists since 1978.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Displaysense","offers":[{"title":"Default Title","offer_id":58070994190723,"sku":"TF5000DS","price":239.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/1496\/2725\/files\/lidl-feather-flag-outside-supermarket-store.jpg?v=1779205351","url":"https:\/\/www.displaysense.co.uk\/products\/double-sided-glass-fibre-teardrop-flag-with-ground-spike-base-inc-graphic-printing-5m","provider":"Displaysense","version":"1.0","type":"link"}