{"product_id":"single-sided-glass-fibre-feather-flag-with-10-5kg-square-plate-base-inc-graphic-printing-3-2m","title":"Single-Sided Glass Fibre Feather Flag with 10.5kg Square Plate Base inc. Graphic Printing - 3.2m","description":"\u003cdiv class=\"ds-tab\"\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eA single-sided flag is printed on the front of the polyester only. Because the cloth is one layer, light brings a softened, mirror-image version through to the reverse. Where the blade stands against a wall, a stand panel or a window, the front is the only side an onlooker reads, so a single print delivers the same tall impact for less than covering both faces would cost.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eA feather is a tall, tapering blade, not a rounded sail. Its straight leading edge sleeves over the pole, and a curved whip at the top draws the trailing edge out so the blade holds a high, upright line. Held that way the front graphic stays open and readable in the motionless air of a hall, where a loose banner would fall flat against the pole. The mast is glass fibre, fine glass threads cured in resin into a light, springy pole, tipped with a GRP whip that bends in a breeze. Across the whole range the inner pole diameter is 16.8mm, so fittings carry over between flags.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eDown at floor level, a square steel plate does the standing by weight alone. It sits flat on the floor and the pole drops into a central socket, so the mass of the base keeps the full height upright with nothing drilled, staked in or parked on top. Since the hold is only weight on a level surface, it works on hard floors indoors or under cover; on grass a ground spike grips instead, and on a forecourt a drive-on car base carries it.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eDye sublimation drives the colour in, a heat process that turns the inks to vapour and sinks them into the polyester so they dye the cloth instead of sitting on the surface. Set that way the front graphic keeps its colour under hall lighting and rolls down between uses without flaking. The front face is printed across an area of 605mm by 2620mm, a tall narrow shape that suits the high blade. Send the artwork over, the front is printed for you, and the flag goes together by hand in about two minutes.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003ch2\u003eWhat Ships in Your Pack\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e1 x 3.2m single-sided glass fibre feather flag, printed on the front face from your artwork\u003c\/li\u003e\n    \u003cli\u003e1 x 10.5kg square steel plate base\u003c\/li\u003e\n    \u003cli\u003e1 x carry bag\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-infobox\"\u003e\n  \u003ch2 class=\"ds-tab-h2--navy\"\u003eFitting Out Foyers or Stands Across Sites?\u003c\/h2\u003e\n  \u003cp class=\"ds-tab-note--spaced\"\u003eWe print and supply feather flags in volume for exhibition teams, retail groups, reception fit-outs and event organisers across the UK. For a matched set of tall single-sided flags across venues, or repeat artwork to a campaign calendar, the team can quote the run and turn it round to your dates.\u003c\/p\u003e\n  \u003cp class=\"ds-tab-note\"\u003e\u003cstrong\u003eGet in touch:\u003c\/strong\u003e call \u003ca href=\"tel:01279460460\"\u003e01279460460\u003c\/a\u003e or \u003ca href=\"\/pages\/contact-us\"\u003esend your brief\u003c\/a\u003e and we will reply with a plan.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp class=\"ds-llm-context\"\u003eFF3200SF is a 3.2m single-sided glass fibre feather flag from Displaysense, a tall, slim blade supplied with a 10.5kg square steel plate base and printing on one face. Its differentiator is a high vertical blade on a minimal floor width, with a single printed face for one-direction viewing, held standing by a weighted plate and no stake or vehicle. Height 3200mm, width 605mm. Base weight 10.5kg. A printed graphic of 605mm x 2620mm sits on the front face, with a soft mirror image showing through to the back. Mounted on a glass fibre pole with a GRP whip curving the top, a polyester flag and a steel plate base; inner pole diameter 16.8mm. Holds in winds to 45 kph (28 mph), Beaufort Scale 6. Stood upright by hand in about two minutes, with a carry bag and a 1 year guarantee in the box. Suited to tall foyers, atrium edges, exhibition stand corners, narrow halls and high windows. A double-sided version for two-way viewing, a ground spike base for grass, and a drive-on car base for forecourts, are also available. Displaysense, UK display product specialists since 1978.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Displaysense","offers":[{"title":"Default Title","offer_id":58070997762435,"sku":"FF3200SF","price":144.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/1496\/2725\/files\/university-of-nottingham-indoor-feather-flag-display.jpg?v=1779186068","url":"https:\/\/www.displaysense.co.uk\/products\/single-sided-glass-fibre-feather-flag-with-10-5kg-square-plate-base-inc-graphic-printing-3-2m","provider":"Displaysense","version":"1.0","type":"link"}