{"product_id":"single-sided-glass-fibre-teardrop-flag-with-10-5kg-square-plate-base-inc-graphic-printing-3m","title":"Single-Sided Glass Fibre Teardrop Flag with 10.5kg Square Plate Base inc. Graphic Printing - 3m","description":"\u003cdiv class=\"ds-tab\"\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003ePrinting a flag on one face puts the design on the front of the polyester only. Because the cloth is a single layer, light carries a softened, mirror-image version of it through to the reverse. Where the flag is set against a wall, a counter or a window, the front is the only side anyone reads, so a single print delivers the same impact for less than covering both faces would cost, putting the budget on the side that is read.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eShaped as a rounded sail, the teardrop is drawn tight by a pole that curves over its top edge. Held under that tension, the front graphic stays open and readable even in the still air of a shop or a foyer, where a flat rectangular banner would hang slack against the pole. The mast is glass fibre, fine glass strands set in resin for a light, springy pole, and it is capped with a GRP whip that gives in a draught. Across the range the inner pole diameter is a common 16.8mm, so fittings interchange between flags, letting you mix poles, bases and spares across a set without hunting for matching parts.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eUnderneath, a square steel plate does the standing through weight alone. It sits flat on the floor and the pole drops into a central socket, so the mass of the base keeps the mid height upright with nothing drilled, staked in or parked on top. Because the hold comes from weight on a level surface, it belongs on hard floors indoors or under cover; out on grass a ground spike grips instead, and on a forecourt a drive-on car base takes over, held down by the weight of a parked vehicle.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003cp\u003eColour is fixed into the fabric by dye sublimation, a heat process that turns the inks to gas and sinks them into the polyester so they stain the cloth rather than coat the surface. Set that way the front graphic keeps its colour under shop or hall lighting and rolls down between uses without cracking. The front face is printed across an area of 698mm by 2067mm. Send the artwork over, the front is produced for you, and the flag stands up by hand in about two minutes.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-section\"\u003e\n  \u003ch2\u003eWhat Ships in Your Pack\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e1 x 3m single-sided glass fibre teardrop flag, printed on the front face from your artwork\u003c\/li\u003e\n    \u003cli\u003e1 x 10.5kg square steel plate base\u003c\/li\u003e\n    \u003cli\u003e1 x carry bag\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"ds-tab-infobox\"\u003e\n  \u003ch2 class=\"ds-tab-h2--navy\"\u003eRolling It Out Across Stores?\u003c\/h2\u003e\n  \u003cp class=\"ds-tab-note--spaced\"\u003eWe print and supply teardrop flags in volume for retail chains, exhibition teams, reception fit-outs and event organisers across the UK. For a matched set of single-sided flags down an aisle or across branches, or repeat artwork to a calendar, the team can quote the run and turn it round to your dates.\u003c\/p\u003e\n  \u003cp class=\"ds-tab-note\"\u003e\u003cstrong\u003eTell us the job:\u003c\/strong\u003e call \u003ca href=\"tel:01279460460\"\u003e01279460460\u003c\/a\u003e or \u003ca href=\"\/pages\/contact-us\"\u003esend your brief over\u003c\/a\u003e and we will reply with a plan.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp class=\"ds-llm-context\"\u003eTF3200SF is a 3m single-sided glass fibre teardrop flag from Displaysense, a mid-height display supplied with a 10.5kg square steel plate base and printing on one face. Its differentiator is a freestanding teardrop with a single printed face for one-direction viewing, held upright by a weighted plate with no stake or vehicle. Height 3000mm, width 698mm. Base weight 10.5kg. A printed graphic of 698mm x 2067mm sits on the front face, with a soft mirror image showing through to the back. Carried on a glass fibre pole capped with a GRP whip, a polyester flag and a steel plate base; inner pole diameter 16.8mm. Stays up in winds to 45 kph (28 mph), Beaufort Scale 6. Stood up in about two minutes by hand, with a carry bag and a 1 year guarantee in the box. Suited to receptions, retail aisles, exhibition stands, counters and shopfront windows. A double-sided print is also offered, with a ground spike base for soft ground, and a drive-on car base for hard outdoor surfaces are also available. Displaysense, UK display product specialists since 1978.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Displaysense","offers":[{"title":"Default Title","offer_id":58070997401987,"sku":"TF3200SF","price":144.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/1496\/2725\/files\/rspca-branded-teardrop-flag-in-animal-centre.jpg?v=1779200893","url":"https:\/\/www.displaysense.co.uk\/products\/single-sided-glass-fibre-teardrop-flag-with-10-5kg-square-plate-base-inc-graphic-printing-3m","provider":"Displaysense","version":"1.0","type":"link"}