Black two-tier clothes rail on wheels holding a large assortment of jackets, shirts and dresses in a minimalist indoor space.
Empty black heavy-duty two-tier clothes rail on castors shown against a light background with a 160 kg load capacity icon.
black-metal-double-tier-clothing-rail-with-wheels-and-160kg-load-capacity-featuring-heavy-duty-steel-frame-tool-free-assembly-and-dual-level-hanging-for-retail-backstage-or-home-use
Black two-tier clothes rail with dimensions shown as 2175 mm high, 915 mm wide and 500 mm deep, with icons indicating an 8.3 kg unit weight and 160 kg maximum load.

Overview

Description

Specifications

Delivery & Returns

FAQs

Knowledge Hub

3ft Two-Tier Black Heavy Duty Clothes Rail: 160kg Certified, Adjustable Centre Bar, Extension Bars, Castor Wheels

When floor space is limited but garment volumes are not, this is the rail our customers reach for. The RA994X is the most compact two-tier in the Displaysense heavy duty range: a 3ft (914mm) frame that doubles your hanging capacity within a footprint small enough for an alcove, a converted cupboard, a backstage wing or a compact dressing room. The adjustable centre bar creates two independent hanging tiers. Two 610mm extension bars raise the maximum height to 2,160mm for full-length garments. Four castor wheels let you reposition the loaded rail without unloading. The 160kg capacity is independently certified to BS EN 16121, not estimated. 32mm epoxy-coated steel. Tool-free click-lock assembly. Displaysense own design, UK-specified since 1978. For those investing in a proper dressing room, home studio or walk-in wardrobe, this is the rail that replaces the throwaway flat-pack option permanently.

914mm W x max 2,160mm H (with extensions) x 510mm D. Standard height 1,550mm. 160kg BS EN 16121 certified capacity (clauses 6.1.1 and 6.1.16). 32mm epoxy-coated steel frame. Adjustable centre bar. Two 610mm extension bars included. Four castor wheels included. Black epoxy powder coat finish. Click-lock assembly, no tools required. Approximately 40 to 60 garments across both tiers. Free UK mainland delivery.

Why the Smallest Two-Tier Delivers the Biggest Capacity Per Square Metre

  • 3ft width that fits where nothing else will: At 914mm this is the most space-efficient two-tier in the range. It fits into alcoves, narrow stockrooms, converted cupboards, backstage wings and compact dressing rooms where even a 4ft rail would be too wide. Two tiers at 3ft give you 6ft of hanging in a 3ft footprint. The width that works when the space is genuinely tight.
  • Adjustable centre bar for two independent tiers: Drop it low for shirts on top and folded trousers below. Raise it to split dresses from jackets. Remove it entirely and the rail converts to a single-tier long-drop for gowns and overcoats. Every change uses the same push-pin mechanism and takes seconds. No tools at any stage.
  • Two 610mm extension bars raise the top rail to 2,160mm: Clip onto the uprights for clearance on full-length gowns, wedding dresses, overcoats and theatrical costumes. The extensions bring the maximum height to just over 7ft. Remove when not needed and the rail returns to its standard 1,550mm configuration.
  • 160kg independently certified capacity: The weight rating applies to the total evenly distributed load whether running two tiers or one. Certified to BS EN 16121 (clauses 6.1.1 and 6.1.16) for structural safety, strength, durability and stability. Test report downloadable. Unlike many alternatives, this load rating is documented, not estimated.
  • Four castor wheels for loaded mobility: Steer the fully loaded rail through doorways and along corridors without unloading. The 510mm depth passes through standard UK internal doors. Lock wheels when stationary. At 3ft wide this rail manoeuvres through spaces that wider models cannot navigate.
  • 32mm epoxy-coated steel, click-lock assembly: Commercial-gauge tubing that resists bowing under a full load. Every joint clicks together without tools. Assembles in under ten minutes. Disassembles just as quickly for events, seasonal changes or moving between sites. Scratch-resistant matte black finish.

Where the Most Compact Two-Tier Earns Its Position

Retail, Boutique Back-of-House Compact stockrooms and boutique back rooms where floor space is genuinely limited but stock volumes cannot be compromised. The 3ft two-tier doubles the capacity of a single-tier rail in the same footprint. BS EN 16121 certification ticks procurement compliance.
Theatre, Costume, Film/TV Wardrobe departments, costume hire and production environments where varied garment lengths and tight backstage corridors demand a two-tier solution in the smallest possible frame. Extension bars handle period gowns and full-length costumes.
Events, Pop-Up, Markets Pop-up retail, market stalls and trade shows where a compact footprint, quick assembly and easy mobility between venues are essential. The 3ft width fits inside a van and assembles on site in minutes with no tools.
Hotels, Housekeeping Compact housekeeping stores, laundry rooms and linen management areas in hotels where a robust, mobile garment solution must fit into a tight utility space. Staff uniforms on top, guest items below.
Home, Dressing Room, Wardrobe For those who want commercial-grade quality in a walk-in wardrobe, dressing room, spare room or home studio. The 3ft width fits where larger rails simply cannot. The matte black finish looks considered rather than industrial.
Schools, Charity, Education School uniform stores, drama departments, charity shop processing rooms and PE kit areas. The 3ft width fits the converted cupboards and corridor spaces that institutions typically allocate. BS EN 16121 certification meets procurement requirements.

Need a Dust Cover or a Wider Two-Tier?

The 3ft clear clothes rail cover AG914 fits this rail exactly, keeping garments dust-free during storage or transit. For more width, the 4ft two-tier RA1590X steps up with the same 160kg capacity and certification.

Call us on 01279460460 or get in touch for multi-unit or fit-out orders.

Displaysense RA994X 3ft Two-Tier Black Heavy Duty Clothes Rail. Most compact two-tier in range. 914mm W x max 2160mm H x 510mm D. 160kg BS EN 16121 certified. 32mm epoxy-coated steel. Adjustable centre bar. Two 610mm extension bars. Four castor wheels. Black epoxy powder coat. Click-lock assembly. Suited to retail, theatre, events, hotels, home wardrobes, schools, charity. Also in 4ft, 5ft, 6ft and white. Displaysense since 1978.

When floor space is limited but garment volumes are not, this is the rail our customers reach for. The 3ft two-tier heavy duty clothes rail is a Displaysense own-design product, built to a commercial specification refined since 1978. The 32mm epoxy-coated steel frame is independently tested to 160kg. The two-tier hanging system doubles your capacity within the same compact footprint. The whole thing assembles without a single tool. At 914mm wide it is the most space-efficient size in the range, yet it carries the same 160kg tested capacity and precision click-lock system as the 4ft, 5ft and 6ft variants. For retail stockrooms, backstage wardrobe departments and compact commercial environments, the 3ft width goes where nothing wider can.

The repositionable centre bar creates two independent hanging tiers. Set it lower for shirts and folded trousers, raise it to accommodate dresses and coats alongside shorter items on the lower tier. Remove it entirely and the rail converts to a single-tier long-drop for gowns, robes and full-length outerwear. Two 610mm extension bars raise the top rail to a maximum operating height of 2,160mm (just over 7ft), providing clearance for the longest garments without dragging on the floor. Four smooth-rolling castor wheels allow the rail to be repositioned across showroom, stockroom or warehouse floors, even when fully loaded. The 510mm depth passes through standard UK internal doors without disassembly.

Not every customer buying this rail is fitting out a stockroom. For those investing in a proper dressing room, home studio or compact walk-in wardrobe, this is the rail that replaces the throwaway flat-pack option permanently. At 3ft wide it occupies less wall space than a standard wardrobe but provides double the hanging capacity of a single-tier rail at the same width. The matte black finish looks considered and contemporary in a bedroom, dressing area or open-plan living space where the rail is visible rather than hidden inside a cupboard. The castor wheels mean the rail moves when the room layout changes. The click-lock assembly means it disassembles flat for storage if the room needs to serve a different purpose temporarily. And the 160kg capacity means it handles a full wardrobe of winter coats, suits and evening wear without the frame bowing or the joints loosening over years of daily use.

This rail is independently tested and fully complies with BS EN 16121, specifically clauses 6.1.1 and 6.1.16, covering safety, strength, durability and stability for furniture used in commercial environments. Unlike many alternatives on the market, the 160kg load rating is documented and independently verified, not estimated or self-certified. The test report is downloadable for procurement, compliance and facilities management teams. Displaysense own design, UK-specified since 1978. The two-tier system was developed in-house as an integrated part of the frame design.

What Ships in Your Pack

  • 1 x 3ft heavy duty steel rail frame with top hanging bar
  • 1 x adjustable centre bar, 2 x 610mm extension bars, 4 x smooth-rolling castor wheels

Kitting Out a Stockroom, Multiple Sites or an Entire Store?

Volume discounts apply automatically as quantity increases. For larger projects, stockroom fit-outs or multi-site procurement, our team can prepare a tailored quote with pricing, lead times and delivery scheduling.

Call us on 01279460460 or send us your requirements and we will come back to you.

Displaysense 3ft two-tier black clothes rail. 914mm W. Max 2160mm H. 510mm D. 160kg BS EN 16121. 32mm epoxy steel. Centre bar. Extension bars. Castors. Black. Click-lock. Since 1978.

Full specifications for the 3ft two-tier black heavy duty clothes rail. The most compact two-tier in the Displaysense heavy duty range. 160kg BS EN 16121 certified. 32mm epoxy-coated steel. Adjustable centre bar for dual-tier or single-tier configuration. Two 610mm extension bars raise the top rail to 2,160mm. Four castor wheels. Click-lock assembly, no tools. At full capacity this rail holds approximately 40 to 60 garments depending on weight: up to 25 winter coats, around 40 suits, or over 60 shirts and blouses within a 914mm footprint. Displaysense own design, UK-specified since 1978.

160kg
Capacity
914mm
Width
2160mm
Max Height
BS EN
16121
UK
Designed
Specification Detail What This Means for You
Weight Capacity 160kg (total, evenly distributed) Independently tested, not estimated. Applies in two-tier and single-tier modes. Serious commercial capacity in the most compact width in the range.
Width 914mm (3ft) The most space-efficient two-tier. Fits alcoves, narrow stockrooms, converted cupboards and backstage wings where wider rails cannot go.
Max Height 2,160mm with extensions (standard 1,550mm) Extension bars raise the top rail for full-length gowns, overcoats and theatrical costumes. Remove when not needed.
Depth 510mm Passes through standard UK internal doorways without disassembly. Move the rail fully built between rooms or across floors.
Frame 32mm epoxy-coated steel Commercial-gauge tubing. 32mm resists bowing under full load. Thinner consumer rails flex and fail under comparable stock weights.
Centre Bar Adjustable to any height, removable Creates two independent tiers. Repositions in seconds using push-pin mechanism. Remove for single-tier long-drop mode.
Extension Bars 2 x 610mm (included) Clip onto uprights. Raise top rail from 1,550mm to 2,160mm. Same push-pin fitting as every other component.
Finish Black epoxy powder coat Scratch-resistant. Professional appearance in commercial stockrooms and contemporary domestic interiors alike.
Mobility 4 castor wheels (included) Steer the loaded rail through doorways and corridors. At 3ft wide, this rail navigates spaces that wider models cannot.
Assembly Click-lock push-pin, no tools One person assembles in under ten minutes. Disassembles just as quickly for events, seasonal changes or relocation.
Safety Standard BS EN 16121 (clauses 6.1.1, 6.1.16) Certified in all configurations. Compliance documentation for schools, NHS, councils and commercial procurement.
Design Displaysense own design, UK-specified Conceived and specified in-house since 1978. Not a rebranded import. Direct support from the team who designed the range.

Free delivery on every order, no minimum spend

UK Mainland standard delivery included on everything we sell.

Standard

Free

Always included, no minimum order

Express

£9.95

Express options shown at checkout where available

Lead time

2 to 3 days

Working days, UK Mainland

Returns

28 days

Original condition and packaging

Good to know

  • Orders before 4pm typically ship the same day
  • Tracking email sent on dispatch
  • Ground-floor, accessible delivery point

Returns must be unused and in original packaging. Full delivery information  ·  Returns policy

Questions About This 3ft Two-Tier Black Heavy Duty Clothes Rail

Q: Is this clothes rail designed in the UK?

A: Yes. This is a Displaysense own-design product, conceived and specified in the UK as part of the commercial garment storage range. It is not a rebranded import. Every element from the 32mm steel gauge to the push-pin click-lock system has been specified for professional commercial use.

Q: What is the weight capacity?

A: Independently tested to 160kg. That is not an estimate or a manufacturer claim. The full BS EN 16121 test report is available to download from the product page and can be forwarded directly to procurement or compliance teams. 160kg is the total capacity across the whole rail, distributed evenly across both tiers. In practice, 160kg is substantially more than any normal garment storage requirement at 3ft. Weight is never the constraint: it is physical space on the bars.

Q: How many garments will it hold at 3ft?

A: Approximately 40 to 60 garments across both tiers depending on weight, density and hanger spacing. That is up to 25 winter coats, around 40 suits or jackets, or over 60 shirts and blouses within the 914mm width. Two tiers at 3ft give you the equivalent of 6ft of single-tier hanging in a 3ft footprint. For heavier commercial stock loads like lined blazers and winter outerwear, plan for 20 to 30 garments per tier.

Q: How high does the rail go with extension bars?

A: 2,160mm (approximately 7ft 1in) with both 610mm extension bars fitted. This provides clearance for full-length gowns, coats and formal wear on the upper tier without bunching or dragging on the floor. Without extensions, the standard height is 1,550mm.

Q: Can I use it as a single-tier rail?

A: Yes. Remove the centre bar and extension bars and the rail functions as a standard single-tier long-drop configuration for gowns, dresses, overcoats and any garment that needs the full hanging height. Reattach them when you need two tiers again. Every component uses the same push-pin mechanism. Reconfiguring takes seconds and no tools. The 160kg capacity applies in both single-tier and two-tier modes. The rail does not care how you configure it.

Q: Will this fit through a standard doorway?

A: Yes. The 510mm depth and 914mm width both pass through standard UK internal doorways without disassembly. At 3ft this is the most manoeuvrable two-tier rail in the range, navigating corridors and tight spaces that wider models cannot.

Q: Is this suitable for home use as well as commercial?

A: Yes. While certified for commercial environments, the modern matte black finish works equally well in a bedroom, spare room, dressing area or compact walk-in wardrobe. The 3ft width is particularly well suited to smaller domestic spaces where a 4ft or wider rail would dominate the room or not fit the available wall. At home it replaces the throwaway flat-pack rail permanently: same 160kg capacity, same steel gauge, same engineering.

Q: Is there a dust cover available?

A: Yes. The 3ft clear clothes rail cover (AG914) is designed to fit this rail exactly, keeping garments dust-free during storage, transit or between seasonal uses. Available separately on the Displaysense website.

Q: What is BS EN 16121?

A: The British and European standard for non-domestic storage furniture, covering structural safety, load-bearing strength, durability and stability for products used in commercial environments. This rail is independently certified to clauses 6.1.1 and 6.1.16, providing documented compliance evidence accepted by procurement teams in retail, education, hospitality, NHS and public sector. The certificate is downloadable from the product page for immediate submission to compliance or facilities teams.

Q: How easy is it to assemble?

A: The rail uses a tool-free push-pin click-lock system. One person builds it in under ten minutes. No screws, no spanners. Disassembles just as quickly for events, seasonal storage or relocation between sites.

Q: Are volume discounts available?

A: Yes. Discounts apply automatically as quantity increases at checkout. For larger orders, stockroom fit-outs or multi-site procurement, call 01279 460 460 or contact us online for a tailored quote with delivery scheduling.

Q: Is this available in other sizes or colours?

A: Yes. The two-tier is available in 3ft, 4ft, 5ft and 6ft widths, in both black and white. All sizes share the same 160kg capacity, extension bars, adjustable centre bar and BS EN 16121 certification. Choose the width and finish for your space.

Expert Advice on Clothes Rails & Storage from Displaysense

Whether you are kitting out a stockroom, refreshing a retail floor or making more of a spare room at home, the right rail setup makes all the difference. Our guides cover everything from buying decisions to display inspiration.

A few reads worth your time:

Downloads

2-Tier Heavy Duty Clothes Rails Spec sheet · UK designed · Scan QR to view on phone

Overview

3ft Two-Tier Black Heavy Duty Clothes Rail: 160kg Certified, Adjustable Centre Bar, Extension Bars, Castor Wheels

When floor space is limited but garment volumes are not, this is the rail our customers reach for. The RA994X is the most compact two-tier in the Displaysense heavy duty range: a 3ft (914mm) frame that doubles your hanging capacity within a footprint small enough for an alcove, a converted cupboard, a backstage wing or a compact dressing room. The adjustable centre bar creates two independent hanging tiers. Two 610mm extension bars raise the maximum height to 2,160mm for full-length garments. Four castor wheels let you reposition the loaded rail without unloading. The 160kg capacity is independently certified to BS EN 16121, not estimated. 32mm epoxy-coated steel. Tool-free click-lock assembly. Displaysense own design, UK-specified since 1978. For those investing in a proper dressing room, home studio or walk-in wardrobe, this is the rail that replaces the throwaway flat-pack option permanently.

914mm W x max 2,160mm H (with extensions) x 510mm D. Standard height 1,550mm. 160kg BS EN 16121 certified capacity (clauses 6.1.1 and 6.1.16). 32mm epoxy-coated steel frame. Adjustable centre bar. Two 610mm extension bars included. Four castor wheels included. Black epoxy powder coat finish. Click-lock assembly, no tools required. Approximately 40 to 60 garments across both tiers. Free UK mainland delivery.

Why the Smallest Two-Tier Delivers the Biggest Capacity Per Square Metre

  • 3ft width that fits where nothing else will: At 914mm this is the most space-efficient two-tier in the range. It fits into alcoves, narrow stockrooms, converted cupboards, backstage wings and compact dressing rooms where even a 4ft rail would be too wide. Two tiers at 3ft give you 6ft of hanging in a 3ft footprint. The width that works when the space is genuinely tight.
  • Adjustable centre bar for two independent tiers: Drop it low for shirts on top and folded trousers below. Raise it to split dresses from jackets. Remove it entirely and the rail converts to a single-tier long-drop for gowns and overcoats. Every change uses the same push-pin mechanism and takes seconds. No tools at any stage.
  • Two 610mm extension bars raise the top rail to 2,160mm: Clip onto the uprights for clearance on full-length gowns, wedding dresses, overcoats and theatrical costumes. The extensions bring the maximum height to just over 7ft. Remove when not needed and the rail returns to its standard 1,550mm configuration.
  • 160kg independently certified capacity: The weight rating applies to the total evenly distributed load whether running two tiers or one. Certified to BS EN 16121 (clauses 6.1.1 and 6.1.16) for structural safety, strength, durability and stability. Test report downloadable. Unlike many alternatives, this load rating is documented, not estimated.
  • Four castor wheels for loaded mobility: Steer the fully loaded rail through doorways and along corridors without unloading. The 510mm depth passes through standard UK internal doors. Lock wheels when stationary. At 3ft wide this rail manoeuvres through spaces that wider models cannot navigate.
  • 32mm epoxy-coated steel, click-lock assembly: Commercial-gauge tubing that resists bowing under a full load. Every joint clicks together without tools. Assembles in under ten minutes. Disassembles just as quickly for events, seasonal changes or moving between sites. Scratch-resistant matte black finish.

Where the Most Compact Two-Tier Earns Its Position

Retail, Boutique Back-of-House Compact stockrooms and boutique back rooms where floor space is genuinely limited but stock volumes cannot be compromised. The 3ft two-tier doubles the capacity of a single-tier rail in the same footprint. BS EN 16121 certification ticks procurement compliance.
Theatre, Costume, Film/TV Wardrobe departments, costume hire and production environments where varied garment lengths and tight backstage corridors demand a two-tier solution in the smallest possible frame. Extension bars handle period gowns and full-length costumes.
Events, Pop-Up, Markets Pop-up retail, market stalls and trade shows where a compact footprint, quick assembly and easy mobility between venues are essential. The 3ft width fits inside a van and assembles on site in minutes with no tools.
Hotels, Housekeeping Compact housekeeping stores, laundry rooms and linen management areas in hotels where a robust, mobile garment solution must fit into a tight utility space. Staff uniforms on top, guest items below.
Home, Dressing Room, Wardrobe For those who want commercial-grade quality in a walk-in wardrobe, dressing room, spare room or home studio. The 3ft width fits where larger rails simply cannot. The matte black finish looks considered rather than industrial.
Schools, Charity, Education School uniform stores, drama departments, charity shop processing rooms and PE kit areas. The 3ft width fits the converted cupboards and corridor spaces that institutions typically allocate. BS EN 16121 certification meets procurement requirements.

Need a Dust Cover or a Wider Two-Tier?

The 3ft clear clothes rail cover AG914 fits this rail exactly, keeping garments dust-free during storage or transit. For more width, the 4ft two-tier RA1590X steps up with the same 160kg capacity and certification.

Call us on 01279460460 or get in touch for multi-unit or fit-out orders.

Displaysense RA994X 3ft Two-Tier Black Heavy Duty Clothes Rail. Most compact two-tier in range. 914mm W x max 2160mm H x 510mm D. 160kg BS EN 16121 certified. 32mm epoxy-coated steel. Adjustable centre bar. Two 610mm extension bars. Four castor wheels. Black epoxy powder coat. Click-lock assembly. Suited to retail, theatre, events, hotels, home wardrobes, schools, charity. Also in 4ft, 5ft, 6ft and white. Displaysense since 1978.

Description

When floor space is limited but garment volumes are not, this is the rail our customers reach for. The 3ft two-tier heavy duty clothes rail is a Displaysense own-design product, built to a commercial specification refined since 1978. The 32mm epoxy-coated steel frame is independently tested to 160kg. The two-tier hanging system doubles your capacity within the same compact footprint. The whole thing assembles without a single tool. At 914mm wide it is the most space-efficient size in the range, yet it carries the same 160kg tested capacity and precision click-lock system as the 4ft, 5ft and 6ft variants. For retail stockrooms, backstage wardrobe departments and compact commercial environments, the 3ft width goes where nothing wider can.

The repositionable centre bar creates two independent hanging tiers. Set it lower for shirts and folded trousers, raise it to accommodate dresses and coats alongside shorter items on the lower tier. Remove it entirely and the rail converts to a single-tier long-drop for gowns, robes and full-length outerwear. Two 610mm extension bars raise the top rail to a maximum operating height of 2,160mm (just over 7ft), providing clearance for the longest garments without dragging on the floor. Four smooth-rolling castor wheels allow the rail to be repositioned across showroom, stockroom or warehouse floors, even when fully loaded. The 510mm depth passes through standard UK internal doors without disassembly.

Not every customer buying this rail is fitting out a stockroom. For those investing in a proper dressing room, home studio or compact walk-in wardrobe, this is the rail that replaces the throwaway flat-pack option permanently. At 3ft wide it occupies less wall space than a standard wardrobe but provides double the hanging capacity of a single-tier rail at the same width. The matte black finish looks considered and contemporary in a bedroom, dressing area or open-plan living space where the rail is visible rather than hidden inside a cupboard. The castor wheels mean the rail moves when the room layout changes. The click-lock assembly means it disassembles flat for storage if the room needs to serve a different purpose temporarily. And the 160kg capacity means it handles a full wardrobe of winter coats, suits and evening wear without the frame bowing or the joints loosening over years of daily use.

This rail is independently tested and fully complies with BS EN 16121, specifically clauses 6.1.1 and 6.1.16, covering safety, strength, durability and stability for furniture used in commercial environments. Unlike many alternatives on the market, the 160kg load rating is documented and independently verified, not estimated or self-certified. The test report is downloadable for procurement, compliance and facilities management teams. Displaysense own design, UK-specified since 1978. The two-tier system was developed in-house as an integrated part of the frame design.

What Ships in Your Pack

  • 1 x 3ft heavy duty steel rail frame with top hanging bar
  • 1 x adjustable centre bar, 2 x 610mm extension bars, 4 x smooth-rolling castor wheels

Kitting Out a Stockroom, Multiple Sites or an Entire Store?

Volume discounts apply automatically as quantity increases. For larger projects, stockroom fit-outs or multi-site procurement, our team can prepare a tailored quote with pricing, lead times and delivery scheduling.

Call us on 01279460460 or send us your requirements and we will come back to you.

Displaysense 3ft two-tier black clothes rail. 914mm W. Max 2160mm H. 510mm D. 160kg BS EN 16121. 32mm epoxy steel. Centre bar. Extension bars. Castors. Black. Click-lock. Since 1978.

Specifications

Full specifications for the 3ft two-tier black heavy duty clothes rail. The most compact two-tier in the Displaysense heavy duty range. 160kg BS EN 16121 certified. 32mm epoxy-coated steel. Adjustable centre bar for dual-tier or single-tier configuration. Two 610mm extension bars raise the top rail to 2,160mm. Four castor wheels. Click-lock assembly, no tools. At full capacity this rail holds approximately 40 to 60 garments depending on weight: up to 25 winter coats, around 40 suits, or over 60 shirts and blouses within a 914mm footprint. Displaysense own design, UK-specified since 1978.

160kg
Capacity
914mm
Width
2160mm
Max Height
BS EN
16121
UK
Designed
Specification Detail What This Means for You
Weight Capacity 160kg (total, evenly distributed) Independently tested, not estimated. Applies in two-tier and single-tier modes. Serious commercial capacity in the most compact width in the range.
Width 914mm (3ft) The most space-efficient two-tier. Fits alcoves, narrow stockrooms, converted cupboards and backstage wings where wider rails cannot go.
Max Height 2,160mm with extensions (standard 1,550mm) Extension bars raise the top rail for full-length gowns, overcoats and theatrical costumes. Remove when not needed.
Depth 510mm Passes through standard UK internal doorways without disassembly. Move the rail fully built between rooms or across floors.
Frame 32mm epoxy-coated steel Commercial-gauge tubing. 32mm resists bowing under full load. Thinner consumer rails flex and fail under comparable stock weights.
Centre Bar Adjustable to any height, removable Creates two independent tiers. Repositions in seconds using push-pin mechanism. Remove for single-tier long-drop mode.
Extension Bars 2 x 610mm (included) Clip onto uprights. Raise top rail from 1,550mm to 2,160mm. Same push-pin fitting as every other component.
Finish Black epoxy powder coat Scratch-resistant. Professional appearance in commercial stockrooms and contemporary domestic interiors alike.
Mobility 4 castor wheels (included) Steer the loaded rail through doorways and corridors. At 3ft wide, this rail navigates spaces that wider models cannot.
Assembly Click-lock push-pin, no tools One person assembles in under ten minutes. Disassembles just as quickly for events, seasonal changes or relocation.
Safety Standard BS EN 16121 (clauses 6.1.1, 6.1.16) Certified in all configurations. Compliance documentation for schools, NHS, councils and commercial procurement.
Design Displaysense own design, UK-specified Conceived and specified in-house since 1978. Not a rebranded import. Direct support from the team who designed the range.

Delivery & Returns

Free delivery on every order, no minimum spend

UK Mainland standard delivery included on everything we sell.

Standard

Free

Always included, no minimum order

Express

£9.95

Express options shown at checkout where available

Lead time

2 to 3 days

Working days, UK Mainland

Returns

28 days

Original condition and packaging

Good to know

  • Orders before 4pm typically ship the same day
  • Tracking email sent on dispatch
  • Ground-floor, accessible delivery point

Returns must be unused and in original packaging. Full delivery information  ·  Returns policy

FAQs

Questions About This 3ft Two-Tier Black Heavy Duty Clothes Rail

Q: Is this clothes rail designed in the UK?

A: Yes. This is a Displaysense own-design product, conceived and specified in the UK as part of the commercial garment storage range. It is not a rebranded import. Every element from the 32mm steel gauge to the push-pin click-lock system has been specified for professional commercial use.

Q: What is the weight capacity?

A: Independently tested to 160kg. That is not an estimate or a manufacturer claim. The full BS EN 16121 test report is available to download from the product page and can be forwarded directly to procurement or compliance teams. 160kg is the total capacity across the whole rail, distributed evenly across both tiers. In practice, 160kg is substantially more than any normal garment storage requirement at 3ft. Weight is never the constraint: it is physical space on the bars.

Q: How many garments will it hold at 3ft?

A: Approximately 40 to 60 garments across both tiers depending on weight, density and hanger spacing. That is up to 25 winter coats, around 40 suits or jackets, or over 60 shirts and blouses within the 914mm width. Two tiers at 3ft give you the equivalent of 6ft of single-tier hanging in a 3ft footprint. For heavier commercial stock loads like lined blazers and winter outerwear, plan for 20 to 30 garments per tier.

Q: How high does the rail go with extension bars?

A: 2,160mm (approximately 7ft 1in) with both 610mm extension bars fitted. This provides clearance for full-length gowns, coats and formal wear on the upper tier without bunching or dragging on the floor. Without extensions, the standard height is 1,550mm.

Q: Can I use it as a single-tier rail?

A: Yes. Remove the centre bar and extension bars and the rail functions as a standard single-tier long-drop configuration for gowns, dresses, overcoats and any garment that needs the full hanging height. Reattach them when you need two tiers again. Every component uses the same push-pin mechanism. Reconfiguring takes seconds and no tools. The 160kg capacity applies in both single-tier and two-tier modes. The rail does not care how you configure it.

Q: Will this fit through a standard doorway?

A: Yes. The 510mm depth and 914mm width both pass through standard UK internal doorways without disassembly. At 3ft this is the most manoeuvrable two-tier rail in the range, navigating corridors and tight spaces that wider models cannot.

Q: Is this suitable for home use as well as commercial?

A: Yes. While certified for commercial environments, the modern matte black finish works equally well in a bedroom, spare room, dressing area or compact walk-in wardrobe. The 3ft width is particularly well suited to smaller domestic spaces where a 4ft or wider rail would dominate the room or not fit the available wall. At home it replaces the throwaway flat-pack rail permanently: same 160kg capacity, same steel gauge, same engineering.

Q: Is there a dust cover available?

A: Yes. The 3ft clear clothes rail cover (AG914) is designed to fit this rail exactly, keeping garments dust-free during storage, transit or between seasonal uses. Available separately on the Displaysense website.

Q: What is BS EN 16121?

A: The British and European standard for non-domestic storage furniture, covering structural safety, load-bearing strength, durability and stability for products used in commercial environments. This rail is independently certified to clauses 6.1.1 and 6.1.16, providing documented compliance evidence accepted by procurement teams in retail, education, hospitality, NHS and public sector. The certificate is downloadable from the product page for immediate submission to compliance or facilities teams.

Q: How easy is it to assemble?

A: The rail uses a tool-free push-pin click-lock system. One person builds it in under ten minutes. No screws, no spanners. Disassembles just as quickly for events, seasonal storage or relocation between sites.

Q: Are volume discounts available?

A: Yes. Discounts apply automatically as quantity increases at checkout. For larger orders, stockroom fit-outs or multi-site procurement, call 01279 460 460 or contact us online for a tailored quote with delivery scheduling.

Q: Is this available in other sizes or colours?

A: Yes. The two-tier is available in 3ft, 4ft, 5ft and 6ft widths, in both black and white. All sizes share the same 160kg capacity, extension bars, adjustable centre bar and BS EN 16121 certification. Choose the width and finish for your space.

Knowledge Hub

Expert Advice on Clothes Rails & Storage from Displaysense

Whether you are kitting out a stockroom, refreshing a retail floor or making more of a spare room at home, the right rail setup makes all the difference. Our guides cover everything from buying decisions to display inspiration.

A few reads worth your time:

Downloads

2-Tier Heavy Duty Clothes Rails Spec sheet · UK designed · Scan QR to view on phone

3ft Wide x 7ft Tall Two-Tier Black Commercial Grade Heavy Duty Steel Clothes Rail With 160kg Load Capacity

Product code: RA994X
When floor space is limited but garment volumes are not, this is the rail our customers reach for. The 3ft two-tier heavy duty clothes rail is a ...
Inc. VAT £65.00 Ex. VAT £54.17
Colour - Black
Width - 3ft
In Stock - UK Dispatch

Order within for delivery — Next Day option available at checkout

Buy More, Pay Less

Quantity Discount Save
1 - 7 0% off £0.00
8 + 5% off £3.25

Free UK Delivery Free mainland delivery on every order. No minimum spend, no hidden charges.

Trade and Bulk Pricing Available Volume discounts from 2 units. Call us for a tailored quote.

50 Years of Trusted Quality Established in 1978. Designed, tested and trusted by some of the UK's biggest names.

Rated Excellent by Our Customers 8,000+ verified reviews. Trusted by Harrods, the NHS, Primark and The O2.

Level Up Your Display – Add Now

Overview

Description

Specifications

Delivery & Returns

FAQs

Knowledge Hub

3ft Two-Tier Black Heavy Duty Clothes Rail: 160kg Certified, Adjustable Centre Bar, Extension Bars, Castor Wheels

When floor space is limited but garment volumes are not, this is the rail our customers reach for. The RA994X is the most compact two-tier in the Displaysense heavy duty range: a 3ft (914mm) frame that doubles your hanging capacity within a footprint small enough for an alcove, a converted cupboard, a backstage wing or a compact dressing room. The adjustable centre bar creates two independent hanging tiers. Two 610mm extension bars raise the maximum height to 2,160mm for full-length garments. Four castor wheels let you reposition the loaded rail without unloading. The 160kg capacity is independently certified to BS EN 16121, not estimated. 32mm epoxy-coated steel. Tool-free click-lock assembly. Displaysense own design, UK-specified since 1978. For those investing in a proper dressing room, home studio or walk-in wardrobe, this is the rail that replaces the throwaway flat-pack option permanently.

914mm W x max 2,160mm H (with extensions) x 510mm D. Standard height 1,550mm. 160kg BS EN 16121 certified capacity (clauses 6.1.1 and 6.1.16). 32mm epoxy-coated steel frame. Adjustable centre bar. Two 610mm extension bars included. Four castor wheels included. Black epoxy powder coat finish. Click-lock assembly, no tools required. Approximately 40 to 60 garments across both tiers. Free UK mainland delivery.

Why the Smallest Two-Tier Delivers the Biggest Capacity Per Square Metre

  • 3ft width that fits where nothing else will: At 914mm this is the most space-efficient two-tier in the range. It fits into alcoves, narrow stockrooms, converted cupboards, backstage wings and compact dressing rooms where even a 4ft rail would be too wide. Two tiers at 3ft give you 6ft of hanging in a 3ft footprint. The width that works when the space is genuinely tight.
  • Adjustable centre bar for two independent tiers: Drop it low for shirts on top and folded trousers below. Raise it to split dresses from jackets. Remove it entirely and the rail converts to a single-tier long-drop for gowns and overcoats. Every change uses the same push-pin mechanism and takes seconds. No tools at any stage.
  • Two 610mm extension bars raise the top rail to 2,160mm: Clip onto the uprights for clearance on full-length gowns, wedding dresses, overcoats and theatrical costumes. The extensions bring the maximum height to just over 7ft. Remove when not needed and the rail returns to its standard 1,550mm configuration.
  • 160kg independently certified capacity: The weight rating applies to the total evenly distributed load whether running two tiers or one. Certified to BS EN 16121 (clauses 6.1.1 and 6.1.16) for structural safety, strength, durability and stability. Test report downloadable. Unlike many alternatives, this load rating is documented, not estimated.
  • Four castor wheels for loaded mobility: Steer the fully loaded rail through doorways and along corridors without unloading. The 510mm depth passes through standard UK internal doors. Lock wheels when stationary. At 3ft wide this rail manoeuvres through spaces that wider models cannot navigate.
  • 32mm epoxy-coated steel, click-lock assembly: Commercial-gauge tubing that resists bowing under a full load. Every joint clicks together without tools. Assembles in under ten minutes. Disassembles just as quickly for events, seasonal changes or moving between sites. Scratch-resistant matte black finish.

Where the Most Compact Two-Tier Earns Its Position

Retail, Boutique Back-of-House Compact stockrooms and boutique back rooms where floor space is genuinely limited but stock volumes cannot be compromised. The 3ft two-tier doubles the capacity of a single-tier rail in the same footprint. BS EN 16121 certification ticks procurement compliance.
Theatre, Costume, Film/TV Wardrobe departments, costume hire and production environments where varied garment lengths and tight backstage corridors demand a two-tier solution in the smallest possible frame. Extension bars handle period gowns and full-length costumes.
Events, Pop-Up, Markets Pop-up retail, market stalls and trade shows where a compact footprint, quick assembly and easy mobility between venues are essential. The 3ft width fits inside a van and assembles on site in minutes with no tools.
Hotels, Housekeeping Compact housekeeping stores, laundry rooms and linen management areas in hotels where a robust, mobile garment solution must fit into a tight utility space. Staff uniforms on top, guest items below.
Home, Dressing Room, Wardrobe For those who want commercial-grade quality in a walk-in wardrobe, dressing room, spare room or home studio. The 3ft width fits where larger rails simply cannot. The matte black finish looks considered rather than industrial.
Schools, Charity, Education School uniform stores, drama departments, charity shop processing rooms and PE kit areas. The 3ft width fits the converted cupboards and corridor spaces that institutions typically allocate. BS EN 16121 certification meets procurement requirements.

Need a Dust Cover or a Wider Two-Tier?

The 3ft clear clothes rail cover AG914 fits this rail exactly, keeping garments dust-free during storage or transit. For more width, the 4ft two-tier RA1590X steps up with the same 160kg capacity and certification.

Call us on 01279460460 or get in touch for multi-unit or fit-out orders.

Displaysense RA994X 3ft Two-Tier Black Heavy Duty Clothes Rail. Most compact two-tier in range. 914mm W x max 2160mm H x 510mm D. 160kg BS EN 16121 certified. 32mm epoxy-coated steel. Adjustable centre bar. Two 610mm extension bars. Four castor wheels. Black epoxy powder coat. Click-lock assembly. Suited to retail, theatre, events, hotels, home wardrobes, schools, charity. Also in 4ft, 5ft, 6ft and white. Displaysense since 1978.

When floor space is limited but garment volumes are not, this is the rail our customers reach for. The 3ft two-tier heavy duty clothes rail is a Displaysense own-design product, built to a commercial specification refined since 1978. The 32mm epoxy-coated steel frame is independently tested to 160kg. The two-tier hanging system doubles your capacity within the same compact footprint. The whole thing assembles without a single tool. At 914mm wide it is the most space-efficient size in the range, yet it carries the same 160kg tested capacity and precision click-lock system as the 4ft, 5ft and 6ft variants. For retail stockrooms, backstage wardrobe departments and compact commercial environments, the 3ft width goes where nothing wider can.

The repositionable centre bar creates two independent hanging tiers. Set it lower for shirts and folded trousers, raise it to accommodate dresses and coats alongside shorter items on the lower tier. Remove it entirely and the rail converts to a single-tier long-drop for gowns, robes and full-length outerwear. Two 610mm extension bars raise the top rail to a maximum operating height of 2,160mm (just over 7ft), providing clearance for the longest garments without dragging on the floor. Four smooth-rolling castor wheels allow the rail to be repositioned across showroom, stockroom or warehouse floors, even when fully loaded. The 510mm depth passes through standard UK internal doors without disassembly.

Not every customer buying this rail is fitting out a stockroom. For those investing in a proper dressing room, home studio or compact walk-in wardrobe, this is the rail that replaces the throwaway flat-pack option permanently. At 3ft wide it occupies less wall space than a standard wardrobe but provides double the hanging capacity of a single-tier rail at the same width. The matte black finish looks considered and contemporary in a bedroom, dressing area or open-plan living space where the rail is visible rather than hidden inside a cupboard. The castor wheels mean the rail moves when the room layout changes. The click-lock assembly means it disassembles flat for storage if the room needs to serve a different purpose temporarily. And the 160kg capacity means it handles a full wardrobe of winter coats, suits and evening wear without the frame bowing or the joints loosening over years of daily use.

This rail is independently tested and fully complies with BS EN 16121, specifically clauses 6.1.1 and 6.1.16, covering safety, strength, durability and stability for furniture used in commercial environments. Unlike many alternatives on the market, the 160kg load rating is documented and independently verified, not estimated or self-certified. The test report is downloadable for procurement, compliance and facilities management teams. Displaysense own design, UK-specified since 1978. The two-tier system was developed in-house as an integrated part of the frame design.

What Ships in Your Pack

  • 1 x 3ft heavy duty steel rail frame with top hanging bar
  • 1 x adjustable centre bar, 2 x 610mm extension bars, 4 x smooth-rolling castor wheels

Kitting Out a Stockroom, Multiple Sites or an Entire Store?

Volume discounts apply automatically as quantity increases. For larger projects, stockroom fit-outs or multi-site procurement, our team can prepare a tailored quote with pricing, lead times and delivery scheduling.

Call us on 01279460460 or send us your requirements and we will come back to you.

Displaysense 3ft two-tier black clothes rail. 914mm W. Max 2160mm H. 510mm D. 160kg BS EN 16121. 32mm epoxy steel. Centre bar. Extension bars. Castors. Black. Click-lock. Since 1978.

Full specifications for the 3ft two-tier black heavy duty clothes rail. The most compact two-tier in the Displaysense heavy duty range. 160kg BS EN 16121 certified. 32mm epoxy-coated steel. Adjustable centre bar for dual-tier or single-tier configuration. Two 610mm extension bars raise the top rail to 2,160mm. Four castor wheels. Click-lock assembly, no tools. At full capacity this rail holds approximately 40 to 60 garments depending on weight: up to 25 winter coats, around 40 suits, or over 60 shirts and blouses within a 914mm footprint. Displaysense own design, UK-specified since 1978.

160kg
Capacity
914mm
Width
2160mm
Max Height
BS EN
16121
UK
Designed
Specification Detail What This Means for You
Weight Capacity 160kg (total, evenly distributed) Independently tested, not estimated. Applies in two-tier and single-tier modes. Serious commercial capacity in the most compact width in the range.
Width 914mm (3ft) The most space-efficient two-tier. Fits alcoves, narrow stockrooms, converted cupboards and backstage wings where wider rails cannot go.
Max Height 2,160mm with extensions (standard 1,550mm) Extension bars raise the top rail for full-length gowns, overcoats and theatrical costumes. Remove when not needed.
Depth 510mm Passes through standard UK internal doorways without disassembly. Move the rail fully built between rooms or across floors.
Frame 32mm epoxy-coated steel Commercial-gauge tubing. 32mm resists bowing under full load. Thinner consumer rails flex and fail under comparable stock weights.
Centre Bar Adjustable to any height, removable Creates two independent tiers. Repositions in seconds using push-pin mechanism. Remove for single-tier long-drop mode.
Extension Bars 2 x 610mm (included) Clip onto uprights. Raise top rail from 1,550mm to 2,160mm. Same push-pin fitting as every other component.
Finish Black epoxy powder coat Scratch-resistant. Professional appearance in commercial stockrooms and contemporary domestic interiors alike.
Mobility 4 castor wheels (included) Steer the loaded rail through doorways and corridors. At 3ft wide, this rail navigates spaces that wider models cannot.
Assembly Click-lock push-pin, no tools One person assembles in under ten minutes. Disassembles just as quickly for events, seasonal changes or relocation.
Safety Standard BS EN 16121 (clauses 6.1.1, 6.1.16) Certified in all configurations. Compliance documentation for schools, NHS, councils and commercial procurement.
Design Displaysense own design, UK-specified Conceived and specified in-house since 1978. Not a rebranded import. Direct support from the team who designed the range.

Free delivery on every order, no minimum spend

UK Mainland standard delivery included on everything we sell.

Standard

Free

Always included, no minimum order

Express

£9.95

Express options shown at checkout where available

Lead time

2 to 3 days

Working days, UK Mainland

Returns

28 days

Original condition and packaging

Good to know

  • Orders before 4pm typically ship the same day
  • Tracking email sent on dispatch
  • Ground-floor, accessible delivery point

Returns must be unused and in original packaging. Full delivery information  ·  Returns policy

Questions About This 3ft Two-Tier Black Heavy Duty Clothes Rail

Q: Is this clothes rail designed in the UK?

A: Yes. This is a Displaysense own-design product, conceived and specified in the UK as part of the commercial garment storage range. It is not a rebranded import. Every element from the 32mm steel gauge to the push-pin click-lock system has been specified for professional commercial use.

Q: What is the weight capacity?

A: Independently tested to 160kg. That is not an estimate or a manufacturer claim. The full BS EN 16121 test report is available to download from the product page and can be forwarded directly to procurement or compliance teams. 160kg is the total capacity across the whole rail, distributed evenly across both tiers. In practice, 160kg is substantially more than any normal garment storage requirement at 3ft. Weight is never the constraint: it is physical space on the bars.

Q: How many garments will it hold at 3ft?

A: Approximately 40 to 60 garments across both tiers depending on weight, density and hanger spacing. That is up to 25 winter coats, around 40 suits or jackets, or over 60 shirts and blouses within the 914mm width. Two tiers at 3ft give you the equivalent of 6ft of single-tier hanging in a 3ft footprint. For heavier commercial stock loads like lined blazers and winter outerwear, plan for 20 to 30 garments per tier.

Q: How high does the rail go with extension bars?

A: 2,160mm (approximately 7ft 1in) with both 610mm extension bars fitted. This provides clearance for full-length gowns, coats and formal wear on the upper tier without bunching or dragging on the floor. Without extensions, the standard height is 1,550mm.

Q: Can I use it as a single-tier rail?

A: Yes. Remove the centre bar and extension bars and the rail functions as a standard single-tier long-drop configuration for gowns, dresses, overcoats and any garment that needs the full hanging height. Reattach them when you need two tiers again. Every component uses the same push-pin mechanism. Reconfiguring takes seconds and no tools. The 160kg capacity applies in both single-tier and two-tier modes. The rail does not care how you configure it.

Q: Will this fit through a standard doorway?

A: Yes. The 510mm depth and 914mm width both pass through standard UK internal doorways without disassembly. At 3ft this is the most manoeuvrable two-tier rail in the range, navigating corridors and tight spaces that wider models cannot.

Q: Is this suitable for home use as well as commercial?

A: Yes. While certified for commercial environments, the modern matte black finish works equally well in a bedroom, spare room, dressing area or compact walk-in wardrobe. The 3ft width is particularly well suited to smaller domestic spaces where a 4ft or wider rail would dominate the room or not fit the available wall. At home it replaces the throwaway flat-pack rail permanently: same 160kg capacity, same steel gauge, same engineering.

Q: Is there a dust cover available?

A: Yes. The 3ft clear clothes rail cover (AG914) is designed to fit this rail exactly, keeping garments dust-free during storage, transit or between seasonal uses. Available separately on the Displaysense website.

Q: What is BS EN 16121?

A: The British and European standard for non-domestic storage furniture, covering structural safety, load-bearing strength, durability and stability for products used in commercial environments. This rail is independently certified to clauses 6.1.1 and 6.1.16, providing documented compliance evidence accepted by procurement teams in retail, education, hospitality, NHS and public sector. The certificate is downloadable from the product page for immediate submission to compliance or facilities teams.

Q: How easy is it to assemble?

A: The rail uses a tool-free push-pin click-lock system. One person builds it in under ten minutes. No screws, no spanners. Disassembles just as quickly for events, seasonal storage or relocation between sites.

Q: Are volume discounts available?

A: Yes. Discounts apply automatically as quantity increases at checkout. For larger orders, stockroom fit-outs or multi-site procurement, call 01279 460 460 or contact us online for a tailored quote with delivery scheduling.

Q: Is this available in other sizes or colours?

A: Yes. The two-tier is available in 3ft, 4ft, 5ft and 6ft widths, in both black and white. All sizes share the same 160kg capacity, extension bars, adjustable centre bar and BS EN 16121 certification. Choose the width and finish for your space.

Expert Advice on Clothes Rails & Storage from Displaysense

Whether you are kitting out a stockroom, refreshing a retail floor or making more of a spare room at home, the right rail setup makes all the difference. Our guides cover everything from buying decisions to display inspiration.

A few reads worth your time:

Downloads

2-Tier Heavy Duty Clothes Rails Spec sheet · UK designed · Scan QR to view on phone

Overview

3ft Two-Tier Black Heavy Duty Clothes Rail: 160kg Certified, Adjustable Centre Bar, Extension Bars, Castor Wheels

When floor space is limited but garment volumes are not, this is the rail our customers reach for. The RA994X is the most compact two-tier in the Displaysense heavy duty range: a 3ft (914mm) frame that doubles your hanging capacity within a footprint small enough for an alcove, a converted cupboard, a backstage wing or a compact dressing room. The adjustable centre bar creates two independent hanging tiers. Two 610mm extension bars raise the maximum height to 2,160mm for full-length garments. Four castor wheels let you reposition the loaded rail without unloading. The 160kg capacity is independently certified to BS EN 16121, not estimated. 32mm epoxy-coated steel. Tool-free click-lock assembly. Displaysense own design, UK-specified since 1978. For those investing in a proper dressing room, home studio or walk-in wardrobe, this is the rail that replaces the throwaway flat-pack option permanently.

914mm W x max 2,160mm H (with extensions) x 510mm D. Standard height 1,550mm. 160kg BS EN 16121 certified capacity (clauses 6.1.1 and 6.1.16). 32mm epoxy-coated steel frame. Adjustable centre bar. Two 610mm extension bars included. Four castor wheels included. Black epoxy powder coat finish. Click-lock assembly, no tools required. Approximately 40 to 60 garments across both tiers. Free UK mainland delivery.

Why the Smallest Two-Tier Delivers the Biggest Capacity Per Square Metre

  • 3ft width that fits where nothing else will: At 914mm this is the most space-efficient two-tier in the range. It fits into alcoves, narrow stockrooms, converted cupboards, backstage wings and compact dressing rooms where even a 4ft rail would be too wide. Two tiers at 3ft give you 6ft of hanging in a 3ft footprint. The width that works when the space is genuinely tight.
  • Adjustable centre bar for two independent tiers: Drop it low for shirts on top and folded trousers below. Raise it to split dresses from jackets. Remove it entirely and the rail converts to a single-tier long-drop for gowns and overcoats. Every change uses the same push-pin mechanism and takes seconds. No tools at any stage.
  • Two 610mm extension bars raise the top rail to 2,160mm: Clip onto the uprights for clearance on full-length gowns, wedding dresses, overcoats and theatrical costumes. The extensions bring the maximum height to just over 7ft. Remove when not needed and the rail returns to its standard 1,550mm configuration.
  • 160kg independently certified capacity: The weight rating applies to the total evenly distributed load whether running two tiers or one. Certified to BS EN 16121 (clauses 6.1.1 and 6.1.16) for structural safety, strength, durability and stability. Test report downloadable. Unlike many alternatives, this load rating is documented, not estimated.
  • Four castor wheels for loaded mobility: Steer the fully loaded rail through doorways and along corridors without unloading. The 510mm depth passes through standard UK internal doors. Lock wheels when stationary. At 3ft wide this rail manoeuvres through spaces that wider models cannot navigate.
  • 32mm epoxy-coated steel, click-lock assembly: Commercial-gauge tubing that resists bowing under a full load. Every joint clicks together without tools. Assembles in under ten minutes. Disassembles just as quickly for events, seasonal changes or moving between sites. Scratch-resistant matte black finish.

Where the Most Compact Two-Tier Earns Its Position

Retail, Boutique Back-of-House Compact stockrooms and boutique back rooms where floor space is genuinely limited but stock volumes cannot be compromised. The 3ft two-tier doubles the capacity of a single-tier rail in the same footprint. BS EN 16121 certification ticks procurement compliance.
Theatre, Costume, Film/TV Wardrobe departments, costume hire and production environments where varied garment lengths and tight backstage corridors demand a two-tier solution in the smallest possible frame. Extension bars handle period gowns and full-length costumes.
Events, Pop-Up, Markets Pop-up retail, market stalls and trade shows where a compact footprint, quick assembly and easy mobility between venues are essential. The 3ft width fits inside a van and assembles on site in minutes with no tools.
Hotels, Housekeeping Compact housekeeping stores, laundry rooms and linen management areas in hotels where a robust, mobile garment solution must fit into a tight utility space. Staff uniforms on top, guest items below.
Home, Dressing Room, Wardrobe For those who want commercial-grade quality in a walk-in wardrobe, dressing room, spare room or home studio. The 3ft width fits where larger rails simply cannot. The matte black finish looks considered rather than industrial.
Schools, Charity, Education School uniform stores, drama departments, charity shop processing rooms and PE kit areas. The 3ft width fits the converted cupboards and corridor spaces that institutions typically allocate. BS EN 16121 certification meets procurement requirements.

Need a Dust Cover or a Wider Two-Tier?

The 3ft clear clothes rail cover AG914 fits this rail exactly, keeping garments dust-free during storage or transit. For more width, the 4ft two-tier RA1590X steps up with the same 160kg capacity and certification.

Call us on 01279460460 or get in touch for multi-unit or fit-out orders.

Displaysense RA994X 3ft Two-Tier Black Heavy Duty Clothes Rail. Most compact two-tier in range. 914mm W x max 2160mm H x 510mm D. 160kg BS EN 16121 certified. 32mm epoxy-coated steel. Adjustable centre bar. Two 610mm extension bars. Four castor wheels. Black epoxy powder coat. Click-lock assembly. Suited to retail, theatre, events, hotels, home wardrobes, schools, charity. Also in 4ft, 5ft, 6ft and white. Displaysense since 1978.

Description

When floor space is limited but garment volumes are not, this is the rail our customers reach for. The 3ft two-tier heavy duty clothes rail is a Displaysense own-design product, built to a commercial specification refined since 1978. The 32mm epoxy-coated steel frame is independently tested to 160kg. The two-tier hanging system doubles your capacity within the same compact footprint. The whole thing assembles without a single tool. At 914mm wide it is the most space-efficient size in the range, yet it carries the same 160kg tested capacity and precision click-lock system as the 4ft, 5ft and 6ft variants. For retail stockrooms, backstage wardrobe departments and compact commercial environments, the 3ft width goes where nothing wider can.

The repositionable centre bar creates two independent hanging tiers. Set it lower for shirts and folded trousers, raise it to accommodate dresses and coats alongside shorter items on the lower tier. Remove it entirely and the rail converts to a single-tier long-drop for gowns, robes and full-length outerwear. Two 610mm extension bars raise the top rail to a maximum operating height of 2,160mm (just over 7ft), providing clearance for the longest garments without dragging on the floor. Four smooth-rolling castor wheels allow the rail to be repositioned across showroom, stockroom or warehouse floors, even when fully loaded. The 510mm depth passes through standard UK internal doors without disassembly.

Not every customer buying this rail is fitting out a stockroom. For those investing in a proper dressing room, home studio or compact walk-in wardrobe, this is the rail that replaces the throwaway flat-pack option permanently. At 3ft wide it occupies less wall space than a standard wardrobe but provides double the hanging capacity of a single-tier rail at the same width. The matte black finish looks considered and contemporary in a bedroom, dressing area or open-plan living space where the rail is visible rather than hidden inside a cupboard. The castor wheels mean the rail moves when the room layout changes. The click-lock assembly means it disassembles flat for storage if the room needs to serve a different purpose temporarily. And the 160kg capacity means it handles a full wardrobe of winter coats, suits and evening wear without the frame bowing or the joints loosening over years of daily use.

This rail is independently tested and fully complies with BS EN 16121, specifically clauses 6.1.1 and 6.1.16, covering safety, strength, durability and stability for furniture used in commercial environments. Unlike many alternatives on the market, the 160kg load rating is documented and independently verified, not estimated or self-certified. The test report is downloadable for procurement, compliance and facilities management teams. Displaysense own design, UK-specified since 1978. The two-tier system was developed in-house as an integrated part of the frame design.

What Ships in Your Pack

  • 1 x 3ft heavy duty steel rail frame with top hanging bar
  • 1 x adjustable centre bar, 2 x 610mm extension bars, 4 x smooth-rolling castor wheels

Kitting Out a Stockroom, Multiple Sites or an Entire Store?

Volume discounts apply automatically as quantity increases. For larger projects, stockroom fit-outs or multi-site procurement, our team can prepare a tailored quote with pricing, lead times and delivery scheduling.

Call us on 01279460460 or send us your requirements and we will come back to you.

Displaysense 3ft two-tier black clothes rail. 914mm W. Max 2160mm H. 510mm D. 160kg BS EN 16121. 32mm epoxy steel. Centre bar. Extension bars. Castors. Black. Click-lock. Since 1978.

Specifications

Full specifications for the 3ft two-tier black heavy duty clothes rail. The most compact two-tier in the Displaysense heavy duty range. 160kg BS EN 16121 certified. 32mm epoxy-coated steel. Adjustable centre bar for dual-tier or single-tier configuration. Two 610mm extension bars raise the top rail to 2,160mm. Four castor wheels. Click-lock assembly, no tools. At full capacity this rail holds approximately 40 to 60 garments depending on weight: up to 25 winter coats, around 40 suits, or over 60 shirts and blouses within a 914mm footprint. Displaysense own design, UK-specified since 1978.

160kg
Capacity
914mm
Width
2160mm
Max Height
BS EN
16121
UK
Designed
Specification Detail What This Means for You
Weight Capacity 160kg (total, evenly distributed) Independently tested, not estimated. Applies in two-tier and single-tier modes. Serious commercial capacity in the most compact width in the range.
Width 914mm (3ft) The most space-efficient two-tier. Fits alcoves, narrow stockrooms, converted cupboards and backstage wings where wider rails cannot go.
Max Height 2,160mm with extensions (standard 1,550mm) Extension bars raise the top rail for full-length gowns, overcoats and theatrical costumes. Remove when not needed.
Depth 510mm Passes through standard UK internal doorways without disassembly. Move the rail fully built between rooms or across floors.
Frame 32mm epoxy-coated steel Commercial-gauge tubing. 32mm resists bowing under full load. Thinner consumer rails flex and fail under comparable stock weights.
Centre Bar Adjustable to any height, removable Creates two independent tiers. Repositions in seconds using push-pin mechanism. Remove for single-tier long-drop mode.
Extension Bars 2 x 610mm (included) Clip onto uprights. Raise top rail from 1,550mm to 2,160mm. Same push-pin fitting as every other component.
Finish Black epoxy powder coat Scratch-resistant. Professional appearance in commercial stockrooms and contemporary domestic interiors alike.
Mobility 4 castor wheels (included) Steer the loaded rail through doorways and corridors. At 3ft wide, this rail navigates spaces that wider models cannot.
Assembly Click-lock push-pin, no tools One person assembles in under ten minutes. Disassembles just as quickly for events, seasonal changes or relocation.
Safety Standard BS EN 16121 (clauses 6.1.1, 6.1.16) Certified in all configurations. Compliance documentation for schools, NHS, councils and commercial procurement.
Design Displaysense own design, UK-specified Conceived and specified in-house since 1978. Not a rebranded import. Direct support from the team who designed the range.

Delivery & Returns

Free delivery on every order, no minimum spend

UK Mainland standard delivery included on everything we sell.

Standard

Free

Always included, no minimum order

Express

£9.95

Express options shown at checkout where available

Lead time

2 to 3 days

Working days, UK Mainland

Returns

28 days

Original condition and packaging

Good to know

  • Orders before 4pm typically ship the same day
  • Tracking email sent on dispatch
  • Ground-floor, accessible delivery point

Returns must be unused and in original packaging. Full delivery information  ·  Returns policy

FAQs

Questions About This 3ft Two-Tier Black Heavy Duty Clothes Rail

Q: Is this clothes rail designed in the UK?

A: Yes. This is a Displaysense own-design product, conceived and specified in the UK as part of the commercial garment storage range. It is not a rebranded import. Every element from the 32mm steel gauge to the push-pin click-lock system has been specified for professional commercial use.

Q: What is the weight capacity?

A: Independently tested to 160kg. That is not an estimate or a manufacturer claim. The full BS EN 16121 test report is available to download from the product page and can be forwarded directly to procurement or compliance teams. 160kg is the total capacity across the whole rail, distributed evenly across both tiers. In practice, 160kg is substantially more than any normal garment storage requirement at 3ft. Weight is never the constraint: it is physical space on the bars.

Q: How many garments will it hold at 3ft?

A: Approximately 40 to 60 garments across both tiers depending on weight, density and hanger spacing. That is up to 25 winter coats, around 40 suits or jackets, or over 60 shirts and blouses within the 914mm width. Two tiers at 3ft give you the equivalent of 6ft of single-tier hanging in a 3ft footprint. For heavier commercial stock loads like lined blazers and winter outerwear, plan for 20 to 30 garments per tier.

Q: How high does the rail go with extension bars?

A: 2,160mm (approximately 7ft 1in) with both 610mm extension bars fitted. This provides clearance for full-length gowns, coats and formal wear on the upper tier without bunching or dragging on the floor. Without extensions, the standard height is 1,550mm.

Q: Can I use it as a single-tier rail?

A: Yes. Remove the centre bar and extension bars and the rail functions as a standard single-tier long-drop configuration for gowns, dresses, overcoats and any garment that needs the full hanging height. Reattach them when you need two tiers again. Every component uses the same push-pin mechanism. Reconfiguring takes seconds and no tools. The 160kg capacity applies in both single-tier and two-tier modes. The rail does not care how you configure it.

Q: Will this fit through a standard doorway?

A: Yes. The 510mm depth and 914mm width both pass through standard UK internal doorways without disassembly. At 3ft this is the most manoeuvrable two-tier rail in the range, navigating corridors and tight spaces that wider models cannot.

Q: Is this suitable for home use as well as commercial?

A: Yes. While certified for commercial environments, the modern matte black finish works equally well in a bedroom, spare room, dressing area or compact walk-in wardrobe. The 3ft width is particularly well suited to smaller domestic spaces where a 4ft or wider rail would dominate the room or not fit the available wall. At home it replaces the throwaway flat-pack rail permanently: same 160kg capacity, same steel gauge, same engineering.

Q: Is there a dust cover available?

A: Yes. The 3ft clear clothes rail cover (AG914) is designed to fit this rail exactly, keeping garments dust-free during storage, transit or between seasonal uses. Available separately on the Displaysense website.

Q: What is BS EN 16121?

A: The British and European standard for non-domestic storage furniture, covering structural safety, load-bearing strength, durability and stability for products used in commercial environments. This rail is independently certified to clauses 6.1.1 and 6.1.16, providing documented compliance evidence accepted by procurement teams in retail, education, hospitality, NHS and public sector. The certificate is downloadable from the product page for immediate submission to compliance or facilities teams.

Q: How easy is it to assemble?

A: The rail uses a tool-free push-pin click-lock system. One person builds it in under ten minutes. No screws, no spanners. Disassembles just as quickly for events, seasonal storage or relocation between sites.

Q: Are volume discounts available?

A: Yes. Discounts apply automatically as quantity increases at checkout. For larger orders, stockroom fit-outs or multi-site procurement, call 01279 460 460 or contact us online for a tailored quote with delivery scheduling.

Q: Is this available in other sizes or colours?

A: Yes. The two-tier is available in 3ft, 4ft, 5ft and 6ft widths, in both black and white. All sizes share the same 160kg capacity, extension bars, adjustable centre bar and BS EN 16121 certification. Choose the width and finish for your space.

Knowledge Hub

Expert Advice on Clothes Rails & Storage from Displaysense

Whether you are kitting out a stockroom, refreshing a retail floor or making more of a spare room at home, the right rail setup makes all the difference. Our guides cover everything from buying decisions to display inspiration.

A few reads worth your time:

Downloads

2-Tier Heavy Duty Clothes Rails Spec sheet · UK designed · Scan QR to view on phone

You may also like

Recently Viewed

Overall rating: 4.8945007 / 5 from 891 reviews.

AI Generated Review Summary

This heavy-duty black clothes rail offers excellent value, sturdy construction, and quick delivery. Customers appreciate its good quality, ease of assembly without tools, and the double height feature providing ample storage space. The smooth rolling castor wheels and robust load capacity of up to 160kg make it a versatile option for both home and commercial use.

Summary topics

  • Castor Wheels: 2%
  • Value for Money: 10%
  • Customer Service: 5%
  • Double Height: 2%
  • Sturdiness: 2%

Review topics: ["quality","delivery","service","rail","instructions","communication","weight","value","design","size","cover","price","fit","materials","finish","rack","clothes","tools","height","wheels","assembly","space","problem","wardrobes","room","use","screws","unit","solution","storage"].

Review highlights

  • "Great quality garment rail at a very reasonable price, with an impressive 160kg load" — Sabina M.
  • "Robust and sturdy rail that met our needs exactly, and at a reasonable price too." — Michael G.
  • "Easy to build great storage space sturdy rails and solid frame no collapsing service was really good thank you" — Janice G.

Reviews

Really pleased with this clothes

"Really pleased with this clothes rail - we have just moved house and needed some hanging space and fast! This absolutely fitted the bill - the rail was delivered quickly, it was really easy to assemble and looks very smart. We were able to sort out a lot of our clothes and have them hanging in an evening. The two rails make it a great option for us, double the storage of a single hanging rail - we liked it so much that we bought another one for another bedroom. Excellent service, thank you!"

— Ian P. (5/5)

Already reviewed, but, the height

"Already reviewed, but, the height and width are perfect for all clothing storage, easily transportable and don't take up a lot of space, a much needed method of clothing storage, where a wardrobe was not enough storage, I could put every item of clothing in one plsce, storage that was a perfect solution to an ongoing problem."

— justin h. (5/5)

Already reviewed, but, the height

"Already reviewed, but, the height and width are perfect for all clothing storage, easily transportable and don't take up a lot of space, a much needed method of clothing storage, where a wardrobe was not enough storage, I could put every item of clothing in one plsce, storage that was a perfect solution to an ongoing problem."

— justin h. (5/5)

It has made so much

"It has made so much difference being able to hold twice the amount of clothes in the same space as a regular clothes rail. My guest room now looks less cluttered . I like the fact that you are able to choose the rail height to your individual needs. The rail is also very sturdy."

— MRS N. (5/5)

I am truly delighted with

"I am truly delighted with the quality and strength of this rail. Very easy to assemble and it looks great. I'm impressed with the communication from purchase to updates on delivery day & time. A quality product and company. I would not hesitate to recommend, on this very positive purchase. Well done and thank you."

— Elaine (5/5)

Wonderful find, great price, quick

"Wonderful find, great price, quick delivery, a perfect clothing storage idea, a highly recommended seller, a first rate service."

— justin h. (5/5)

I love my new clothes

"I love my new clothes rail and so did all my customers at my first car boot with it! With ease, they were able to check out each item. Although I have hand osteoarthritis, the rail was so easy to assemble (no tools needed as it has a click button system to secure each part. ) Previous car boots were always challenging with my old clothes rail that wobbled and held so few clothes. This car boot with my new, professional rail was a dream. The four feet wide, two rail model holds so much, but takes up a very small footprint of ground, giving me lots of room for the table that displays all the table top items. I have recommended to friends who are are fellow 'car booters. ' Thank you, Jenna"

— Jennifer M. (5/5)

So happy with our purchase.

"So happy with our purchase. The rail was larger than we thought which was good and extremely solid. The company were first class. Delivery quick."

— Pamela F. (5/5)

I’m very impressed. Rapid delivery,

"I’m very impressed. Rapid delivery, quick and easy to assemble Very solid and well finished. We bought this to tide us over while we were waiting for wardrobes in our new house and it’s taken a surprising amount of clothes. Extremely good value for money especially with free delivery."

— Mr M. (5/5)

Fabulous value. This rail is

"Fabulous value. This rail is exceptionally strong, ideal for my extra clothing. Easy to put together. I bought the cover too. I would highly recommend this product"

— Hazel R. (5/5)

Q&A