Single Sided LED Lightbox with Backlit PVC Printing - 1000mm

Light a Shop Wall With a 1m LED Lightbox

A printed poster in a retail space needs to attract attention. A backlit one already does. The SS100LED is a 1000mm wide freestanding LED lightbox that illuminates your custom-printed graphic from behind, creating an even, edge-to-edge glow that stands out against overhead shop lighting. At 1000mm it is the most versatile width in the range: compact enough to stand between fixtures on a shop floor or fill a shell scheme side return, broad enough to work alone behind a product display, and a natural partner beside a wider backdrop panel. Custom backlit printing is included with the order, so you place the order, receive an artwork template, submit the design, and the finished lightbox arrives with the graphic already fitted. Transformers are housed inside the frame. Tool-free assembly takes about 10 minutes. Best suited to retail stores, trade shows and brand activations where floor space is limited but the message still needs to stand out.

Why a Freestanding Lightbox Suits Retail and Events

• Brighter than the room around it: a lit graphic stands out against shop lighting, daylight through a shopfront and the visual noise of stock on every wall, something an unlit graphic in the same position cannot achieve once the lights are on.
• Print included, artwork on your timeline: Place your order, receive a personalised artwork template, complete your design and return it. The lightbox arrives with fire retardant backlit SEG graphics fitted and ready to plug in. No separate print order. No third-party printer. Replacement graphics are available for future events without replacing the frame.
• Stands anywhere on a floor: two feet keep it upright with nothing fixed to a wall, so it can sit between fixtures, beside a till point, in a window or on a stand, then move again when the layout changes. Nothing is drilled into a unit you lease.
• A frame built for repeat use: the 120mm profile is half as deep again as a standard 80mm frame, allowing more LED strips to sit inside it. PVC retains its shape through repeated packing and rebuilding, so the frame bought this year still performs five years from now.
• No power pack on show: transformers are built into the frame itself. Plug it in at the wall and the LEDs light straight away. The area behind remains clear, with nothing bulky on the floor and nothing to trip over.
• One panel or a whole back wall: supplied link leads connect one unit to another. Combine 1000mm, 2000mm and 3000mm widths in a straight run, add 90-degree connectors for L-shaped corners and 180-degree for U-shaped shell schemes. The system can expand as the space does.

Where a 1m Backlit Display Panel Works Best

The difference between a lit display and an unlit one is the difference between being seen across a hall and being walked past. This lightbox lights custom-printed graphics from behind at 6500K daylight temperature, giving an even glow that keeps colours vivid and text sharp at distance. In dimly lit halls where ambient lighting is set for presentations, the backlit graphic cuts through. In brightly lit retail environments, it lifts the graphic above the visual noise around it.

The 120mm premium PVC frame runs half as deep again as a standard 80mm profile, and that extra depth is doing real work rather than adding bulk. It houses the additional LED strips, and more strips produce even light across the whole 2250mm x 1000mm graphic area instead of bright edges around a dim centre. On a graphic more than two metres tall, an uneven wash shows immediately. PVC also holds its shape through years of repeated assembly and breakdown. The transformers are built into the frame itself, so there is no power pack sitting on the floor behind the stand, no cable run to tape down and nothing for anybody to trip over in the aisle.

Modular connectivity is what turns a single panel into a complete stand system. Supplied link leads connect one unit to the next, so a run grows to whatever width the wall allows. Add 90-degree connectors and the run turns a corner into an L-shape. Add 180-degree connectors and it wraps three sides of a shell scheme. A full 3m x 3m U-shaped stand builds entirely from these panels using flush feet and half foot stabilisers.

Custom backlit printing comes with the order. Place your order, receive a personalised artwork template inside a day, complete the design to the template specifications and send it back. Our print team reviews the artwork, checks the resolution and the colour profile, and only moves to production once satisfied it will print correctly on backlit material, which behaves differently from ordinary print stock. Fire retardant SEG graphics feed into the frame channels on silicone edging that tensions the fabric across the panel. When branding changes, a replacement print goes into the same frame rather than a whole new unit, under the 5-year guarantee.

What Ships in Your Pack

• 1 x white PVC lightbox frame (120mm profile, numbered sections) with integrated LEDs and transformers
• Custom-printed single-sided backlit SEG graphic, stabilising feet, UK plug, link leads, wheeled padded bag