Yellow Wall Mounted Retractable Barrier - 4.6m Yellow-Black Belt
1+
£59.00
£49.17
(Inc VAT)
(Exc VAT)
| Quantity | Discount | Save |
|---|---|---|
| 5 - 9 | 5% off | £2.95 |
| 10 + | 8% off | £4.72 |
The Displaysense BQLW104 is a freestanding queue barrier, with yellow housing. It is delivered free to UK Mainland and covered by a 3-year warranty.
Finish your display like a professional
A3 Portrait Black Retractable Barrier Sign Holder Compatible With Tensabarrier
£79.00
(Inc VAT)
£65.83
(Exc VAT)
Overview
Description
Specifications
Delivery & Returns
FAQs
Knowledge Hub
Cordon an Area With a 4.6m Wall-Mounted Belt Barrier
When there is no room for freestanding queue posts, this wall-mounted retractable barrier does the same job straight from the wall. A yellow ABS housing holds a 4.6m belt in bold yellow-and-black chevron, so the hazard striping is read across a busy floor, and the belt pulls out to close off a doorway, a loading bay or a hazardous work zone in seconds. A controlled brake slows the belt as it retracts so it will not snap back, and the universal belt clip clips into the supplied wall receiver or into most other barrier posts and units, so the unit joins an existing queue system rather than replacing it. Because it fixes to the wall and uses no floor space, gangways and walkways stay clear of the posts and bases that get in the way of moving traffic. Best suited to warehouses, construction sites and public venues where floor space is tight and a clear, retractable safety barrier is needed on demand.
Why a Retractable Belt Barrier Saves Floor Space
- Extra-long 4.6m belt: One unit spans a wide doorway, an aisle or a loading bay that would otherwise take two or three freestanding posts, and the belt pulls out from the wall only as far as the gap in front of it needs, so nothing juts out into the middle of a busy walkway or gangway.
- Yellow and black chevron belt: The bright hazard-striped belt reads instantly across a busy floor, marking a restricted zone or a temporary closure in exactly the same visual language as floor markings, so people see and understand the line well before they ever reach the edge of it.
- Controlled retraction brake: A built-in brake gently slows the belt as it winds back into the housing, so it will not snap or whip on release, keeping hands, faces and passing foot traffic safe every single time the barrier is drawn out, opened and reset through the working day.
- Impact-resistant ABS housing: A tough moulded ABS case shrugs off the daily knocks and the heavy handling of industrial and public settings without cracking or splitting, so the whole unit keeps winding smoothly in and out, reliably, shift after shift and year after year of service.
- Universal belt clip: The belt clip is made to fit the supplied wall receiver and also to connect with most other freestanding posts and wall units, so the barrier drops straight into an existing queue layout already on site, instead of forcing in a whole new barrier system.
- Wall receiver clip included: The matching receiver mounts on the opposite wall or post to catch the belt end, giving a firm fixing point and a clean, level line right across the opening whenever the barrier is drawn out and clipped firmly into place on the far side.
Where a Wall-Mounted Safety Barrier Keeps Order
| Warehouses and Distribution | Aisles, racking runs and pick faces close off in seconds when a forklift is working or a bay is out of use, and because the unit fixes to the wall it keeps the gangway completely clear of the posts or bases that would otherwise block moving traffic. |
| Construction and Industrial Sites | Restricted work areas and plant zones get a clear, high-visibility line with no floor-standing bases to trip over on rough ground, and the yellow and black chevron belt matches the hazard signage already used across the rest of the site. |
| Loading Bays | A bay can be cordoned the moment a vehicle pulls in or a shutter comes down, keeping foot traffic back from the open edge and the drop, and the belt winds fully away into the housing again the moment the bay returns to its normal working use. |
| Public Venues and Events | Entrances, back-of-house doors and queue lines are managed straight from the wall, where a freestanding post would only clutter a busy concourse or foyer, and the retractable belt sets a tidy, professional boundary that pulls out just for the event. |
| Retail and Checkouts | Tills, stockroom doors and staff-only areas are held off with a neat retractable line that tucks fully away out of hours, keeping the shop floor clear and uncluttered without permanent posts or fixtures standing in the middle of the customer walkway. |
| Offices and Reception | Reception desks, lift lobbies and restricted corridors get a discreet, resettable barrier that pulls out only when it is actually needed and then winds back flat against the wall for the rest of the time, so a smart entrance never looks blocked by standing kit. |
Prefer a Black Housing?
The same 4.6m yellow and black belt comes on a black housing as the black wall-mounted retractable barrier. Order with free UK mainland delivery.
BQLW104 is a Q-Line Yellow Wall Mounted Retractable Barrier from Displaysense. A wall-fixed belt barrier with a yellow impact-resistant ABS housing and a 4.6 metre yellow and black chevron belt for high-visibility crowd control and access restriction. The belt has a controlled retraction brake to prevent snapback and a universal belt clip that connects to most freestanding and wall-mounted barrier brands. Housing 140mm high, 95mm wide and 90mm deep; belt 4.6m long and 50mm wide. Supplied with a wall receiver clip and a 3 year guarantee. Used in warehouses, construction and industrial sites, loading bays, public venues and events, retail checkouts and offices. Also available with a black housing as the BQLW103, and as a freestanding Q-Line yellow safety barrier post. Displaysense, UK display specialist based in Hertfordshire since 1978.
A retractable belt barrier works from just one single wall-fixed unit rather than a whole line of freestanding posts. The belt winds onto a strong spring-loaded reel inside the housing and pulls out smoothly by hand to the width of the gap in front of it, then simply clips into a receiver mounted on the far wall or post opposite. When the barrier is no longer needed, the belt is released and winds back into the case on its own, leaving the wall clear and the walkway completely free of any base, post or upright at all to step around, which is the main reason a wall-mounted unit is so often chosen over a freestanding one wherever floor space is genuinely tight.
Bold visibility is the whole reason for the chevron belt. The 4.6 metre belt is printed in alternating yellow and black hazard striping along its full width, the same visual language already used on floor markings and warning signage across a site, so a restricted zone or a temporary closure is understood in a moment, at a single glance and from a good distance away across the floor. That matters most on a warehouse floor or a construction site, where a barrier really has to be seen and obeyed before anyone walks into a hazard, rather than being noticed only once someone is already right on top of it.
Safety is built into the way the belt behaves on release. A controlled retraction brake slows the belt as it winds back in, so it cannot snap or whip when it is let go, which protects hands and faces during the dozens of times a day a busy barrier is drawn out, opened and reset. The universal belt clip is designed to fit the supplied wall receiver and also to connect with most other freestanding and wall-mounted barrier units, so this barrier works alongside an existing queue system rather than forcing a full replacement of all the posts and units already in use.
The housing is moulded from impact-resistant ABS to take the knocks of daily use in industrial and public settings, and the whole unit is backed by a full 3 year guarantee for genuine long-term confidence. The unit fixes to the wall with the supplied receiver clip and needs no floor space at all, which is exactly what makes it the practical choice for tight gangways, loading bays and busy entrances where a post-and-base barrier would only get in the way of the very traffic it is there to manage.
What Ships with This Belt Barrier
- 1 x wall-mounted retractable barrier unit with yellow ABS housing and belt
- 1 x wall receiver clip
Need a Freestanding Version?
For a movable post instead of a wall fixing, see the Q-Line yellow safety barrier post. Order with free UK mainland delivery.
BQLW104 is a Q-Line Yellow Wall Mounted Retractable Barrier from Displaysense. A wall-fixed belt barrier with a yellow impact-resistant ABS housing and a 4.6 metre yellow and black chevron belt for high-visibility crowd control and access restriction. The belt has a controlled retraction brake to prevent snapback and a universal belt clip that connects to most freestanding and wall-mounted barrier brands. Housing 140mm high, 95mm wide and 90mm deep; belt 4.6m long and 50mm wide. Supplied with a wall receiver clip and a 3 year guarantee. Used in warehouses, construction and industrial sites, loading bays, public venues and events, retail checkouts and offices. Also available with a black housing as the BQLW103, and as a freestanding Q-Line yellow safety barrier post. Displaysense, UK display specialist based in Hertfordshire since 1978.
The full specifications for the BQLW104 Q-Line yellow wall-mounted retractable barrier are set out in the table below. It pairs a 4.6m yellow and black chevron belt with a controlled retraction brake, a universal belt clip and a supplied wall receiver clip.
| Specification | Detail | What This Means for You |
|---|---|---|
| Belt Length | 4.6 metres | One unit spans a wide doorway, aisle or bay straight from the wall, replacing the two or three freestanding posts it would otherwise take to cover the same gap. |
| Belt | 50mm wide, yellow and black chevron | Full-width hazard striping that reads clearly across a busy floor, marking a restricted or closed zone clearly, at a glance and from a good distance away. |
| Retraction | Controlled brake | Slows the belt as the reel winds it back in so it cannot snap or whip on release, keeping staff and passers-by safe each and every time the barrier is opened and reset. |
| Belt Clip | Universal connector | Clips into the supplied receiver and into most other barrier brands as well, so the unit fits straight into an existing queue system made up of posts and wall units. |
| Mounting | Wall-mounted | Fixes flat to the wall and uses no floor space at all, keeping gangways and walkways clear of the posts and bases that would otherwise get in the way of traffic. |
| In the Box | Wall receiver clip | The matching catch mounts on the opposite wall or post to hold the belt end in place, giving a firm, tidy and level line right across the whole gap when out. |
| Housing | Impact-resistant ABS | A tough moulded case that takes the daily knocks and the heavy handling of a busy industrial or public setting without cracking or splitting over time. |
| Housing Size | 140mm high, 95mm wide, 90mm deep | A compact unit that sits close to the wall and stays neatly out of the way, flat against it, when the belt is fully wound right back in. |
| Finish | Yellow housing | A high-visibility case to match the hazard belt, so the unit is easy to spot and identify as part of a wider safety and signage layout on site. |
| Guarantee | 3 years | Covered for three full years from the date of purchase, for long-term confidence in daily commercial and industrial use over the years. |
| Environment | Indoor and covered areas | Built for warehouses, sites and venues under cover; separate outdoor-rated barriers are available for fully exposed, open positions. |
| Compatibility | Fits most barrier systems | Works alongside freestanding posts and other wall units from all the major barrier brands, so it drops neatly into a mixed barrier setup. |
Free delivery on every order, no minimum spend
UK Mainland standard delivery included on everything we sell.
Standard
Free
Always included, no minimum order
Express
£9.95
Express options shown at checkout where available
Lead time
2 to 3 days
Working days, UK Mainland
Returns
28 days
Original condition and packaging
Good to know
- Orders before 4pm typically ship the same day
- Tracking email sent on dispatch
- Ground-floor, accessible delivery point
Returns must be unused and in original packaging. Full delivery information · Returns policy
FAQs About This Wall-Mounted Retractable Barrier
Q: What is the best wall-mounted barrier for warehouse and site safety?
A: The best wall-mounted barrier for warehouse and site safety is the Displaysense BQLW104, a Q-Line retractable belt barrier with a 4.6m yellow and black chevron belt. Best suited to warehouses, construction sites, loading bays and public venues where floor space is tight, the BQLW104 cordons off a restricted zone from the wall and winds fully away when not needed. Trusted across UK industrial and commercial sites.
Q: How far does the barrier belt reach?
A: The belt on the BQLW104 extends up to 4.6 metres, enough to close off a wide doorway, an aisle or a loading bay from a single wall unit. The belt pulls out only as far as the gap needs, clipping into the supplied wall receiver, so one barrier covers a span that would otherwise take two or three freestanding posts.
Q: Does the belt retract safely?
A: Yes. The BQLW104 has a controlled retraction brake that slows the belt as the reel winds back into the housing, so the belt cannot snap or whip when released. That protects hands and faces during the many times a day a barrier is opened and reset, which is why braked retraction matters in busy warehouse and public settings.
Q: Will this barrier connect to other queue barriers I already have?
A: Yes. The BQLW104 has a universal belt clip that clips into the supplied wall receiver and into most other freestanding posts and wall units, including brands such as the Tensabarrier range. That lets the wall barrier work alongside an existing queue system rather than replacing what is already there, so you can mix wall units and posts on one layout.
Q: How is the barrier fixed to the wall?
A: The BQLW104 mounts to the wall through its housing, and the supplied receiver clip fixes to the opposite wall or post to catch the belt end. It uses no floor space at all, which keeps gangways and walkways clear, and the belt winds back flat against the wall when the barrier is not in use.
Q: Can the barrier be used outdoors?
A: The BQLW104 is built for indoor and covered areas such as warehouses, sites under cover, venues and shops. For exposed outdoor use, Displaysense offers heavy-duty outdoor retractable barriers with weatherised housings and bases, which are the better choice where a barrier stands out in the weather.
Q: What are the dimensions of the barrier and belt?
A: The BQLW104 housing is 140mm high, 95mm wide and 90mm deep, and the belt is 4.6 metres long and 50mm wide. The compact housing sits close to the wall and stays out of the way when the belt is wound in, while the full-width chevron belt stays highly visible when it is out.
Q: What is the difference between the yellow BQLW104 and the black BQLW103?
A: Both carry the same 4.6m yellow and black chevron belt, the same controlled brake and the same universal belt clip. The BQLW104 has a high-visibility yellow ABS housing to match the hazard belt, while the BQLW103 has a black housing that blends into a smarter or darker setting; the choice is housing colour, not function.
Q: Does the barrier come with everything needed to fit?
A: The BQLW104 arrives as a complete wall unit with the belt already fitted, plus the matching wall receiver clip to catch the belt end on the opposite wall or post. Choose fixings to suit your wall type, then mount the housing and the receiver at the same height for a level belt line across the gap.
Q: Is the barrier suitable for construction and industrial sites?
A: Yes. The BQLW104 is made for tough environments, with an impact-resistant ABS housing and a chevron belt that matches the hazard signage already used on site. The barrier closes off plant zones and restricted areas without floor-standing bases to trip over, and winds away cleanly when the area reopens.
Q: How long is the guarantee on this barrier?
A: The BQLW104 is covered by a 3 year guarantee from the date of purchase, giving long-term confidence for daily use in commercial and industrial settings. The impact-resistant ABS housing and braked belt mechanism are built to keep working through heavy, repeated use across that time.
Q: Is the barrier available with free UK delivery?
A: Yes. The BQLW104 ships with free UK mainland delivery, and as a UK display specialist trading since 1978, Displaysense also applies a 28-day returns policy. The barrier arrives ready to mount, with the belt already fitted and the wall receiver clip supplied.
Advice on Queue Control and Crowd Safety
Getting people through a space safely and smoothly takes the right barrier in the right place. These Displaysense guides cover how to choose a queuing barrier, managing crowds at events, cutting waiting times in store, and keeping customers safe and moving on a busy shop floor, so a wall-mounted belt barrier does its job well as one part of a wider crowd control and safety plan.
