Overview
Description
Specifications
Delivery & Returns
FAQs
Knowledge Hub
A Red Felt Noticeboard That Keeps Safety Notices Seen
Red carries a warning before a word on it is read, and across the largest board in the fire-resistant tamperproof range that signal does real work. The bold red felt pulls attention straight to fire procedures, safety notices and the warnings a busy building cannot let slip past, with the longest walls letting all of it sit in one secure run. Two lockable shatterproof doors hold every notice exactly where it was placed. The board earns its fire rating as a finished composite, tested as one unit rather than as separate materials, which is what a high-risk corridor or escape route depends on. Best suited for hospitals, factories and large schools where safety-critical information has to command attention and stay readable across a long, busy public wall.
Why Critical Notices Belong on a Red Noticeboard
- Red that flags what matters: On a safety wall the eye should reach the urgent notice first, and a red ground delivers that before a word is read. Fire actions and hazard warnings stand out at a glance, so the things that cannot be missed are never buried among routine paperwork.
- A key-locked door for each half: Two doors close the width rather than one, both turning on the same staff-held key. Every safety notice stays fixed where it was placed, and a half-width door stays light and quick to open even when the corridor in front is full.
- Room for a whole site's notices: Made for the longest walls, the board draws a site's fire, safety and operational information into one continuous run. People learn a single place to look for what matters, instead of checking several smaller boards spread around a building.
- Fire-rated as one whole board: Certification belongs to the finished unit, not the felt by itself, with the board tested complete to BS 476 Class 0 and to BS EN 13501-1 Class B-s1, d0. On an escape route a fire officer needs evidence for the object on the wall, and this carries exactly that.
- Clear PETG that will not shatter: Each door is glazed in clear PETG, a tough plastic with its own BS 476 Part 7 Class 1Y rating. It keeps notices flat and visible, stands up to the bumps of a crowded space, and will not break into shards the way a glass panel this large could under a knock.
- Pins and staples, right across the red: The red felt takes a pin or staple wherever a notice goes, so even the largest board fills fast and refreshes easily, the weave closing over old holes. It comes with a concealed wall mount kit, snap-on corner covers and a two year guarantee, all UK-made.
Where This Large Red Display Board Earns Its Place
| Hospital and Clinical Corridors | Fire procedures, infection-control notices and emergency information line a hospital corridor on the largest board, the bold red pulling the eye to the items that matter most and the locked doors keeping them fixed. |
| Factory and Warehouse Floors | Where a factory or warehouse runs to strict safety rules, a large red board carries hazard warnings, shift safety briefings and operational notices across a long wall, its colour flagging anything urgent at a glance. |
| Large School and College Sites | Across a large school or college site, a big red board gathers fire actions, safeguarding information and key notices in one place, the strong colour helping pupils and staff spot critical messages quickly. |
| Transport and Depot Buildings | Safety briefings, route notices and compliance information fill the largest board in a transport depot or bus garage, the long span holding a full set and the red marking what must not be missed. |
| Leisure Centres and Stadiums | Evacuation routes, capacity notices and event information run along a large red board in a leisure centre or stadium, the width suiting a high-footfall venue and the bold colour reading from a distance. |
| Escape Routes and Assembly Points | Along an escape route or near an assembly point, where signage is checked closely, the composite-certified board carries evacuation notices on a surface rated as a whole unit, the red reinforcing their urgency. |
Would a Shorter Board Fit Better?
Where a wall is shorter, the Fire Resistant Tamperproof Red Felt Noticeboard 1800mm x 1200mm brings the same dual-door, lockable, fire-certified build in a slightly smaller size. This board also comes in blue, green and grey to suit the setting. Order with free UK mainland delivery.
Call us on 01279460460 or send us your requirements and we will get back to you.
NB5024R is a Fire Resistant Tamperproof Red Felt Noticeboard from Displaysense. The largest board in the range, a dual-door lockable, fire-certified display case, independently tested as a full composite to BS 476 Class 0 and BS EN 13501-1 Class B-s1, d0, with clear PETG doors rated to BS 476 Part 7 Class 1Y. Dimensions 2400mm x 1200mm. Weight 42kg. Bold red felt surface that holds pins and staples behind two lockable shatterproof PETG doors, set in a satin silver anodised aluminium frame with rounded safety corners and snap-on corner covers, 20mm internal clearance, landscape orientation only, a concealed wall mount kit and a two year guarantee, made in the UK. Used by hospitals, factories, large schools and transport sites across the UK for safety-critical, high-traffic display. Also available in blue, green and grey, and in sizes from 600mm x 900mm up to this 2400mm x 1200mm. Displaysense, UK display product specialists since 1978. Free UK delivery.
Here, red is a functional choice rather than a decorative one. As the universal signal for safety and alert, it makes a notice register as important the moment it is seen, which is exactly what fire actions, hazard warnings and emergency information need to do on a wall people pass without stopping. On the largest board in the range, that instant recognition keeps a critical message from being lost among rotas, menus and routine paperwork, because the eye goes to the red panel first. A neutral background leaves everything competing on equal terms, which is the last thing a safety notice can afford.
Size is the second half of what this board offers. Built to span the longest walls, it turns a major corridor, factory floor or concourse into one continuous display, holding what would otherwise need several separate boards dotted along the route. Bringing it together means staff and visitors check one place for safety and operational information rather than three, and the content stays consistent across the whole wall instead of contradicting itself from board to board. For a large site, that single point of truth is as valuable as the capacity it adds.
A safety notice is only useful while it stays accurate, which is why the board locks. The two doors share one key, kept by staff, so a passer-by cannot pull a notice down, cover it or swap it, while splitting the run into a pair leaves each door light enough to open in a crowd. Glazing both in shatterproof PETG rather than glass suits a knock-prone factory or corridor, taking impacts without shedding fragments, and the corner covers snap over the fixings so none are left exposed to tamper with.
Beneath the bold surface sits a fire specification that applies to the whole board, which an escape route demands. Tested as a single composite, it meets BS 476 Class 0 across Parts 6 and 7 and BS EN 13501-1 Class B-s1, d0, with each PETG door separately rated to BS 476 Part 7 Class 1Y, so the certificate covers the object on the wall, not its materials. Toughness comes from a satin silver aluminium frame and rounded safety corners built for a high-traffic wall, the red felt accepts pins and staples along its length, and the board fits landscape only. As the heaviest in the line, it needs two people to hang, supplied with a wall mount kit and a two year guarantee.
What Ships with This Noticeboard
- 1 x fire-resistant tamperproof red felt noticeboard with dual lockable PETG doors and keys
- 1 x concealed wall mount kit with snap-on corner covers
No Lock Needed at This Size?
Where a locked door is not needed, the Fire Resistant Red Felt Aluminium Framed Noticeboard 2400mm x 1200mm gives the same width and fire certification in an open framed board.
Call us on 01279460460 or send us your requirements and we will get back to you.
NB5024R is a Fire Resistant Tamperproof Red Felt Noticeboard from Displaysense. The largest board in the range, a dual-door lockable, fire-certified display case, independently tested as a full composite to BS 476 Class 0 and BS EN 13501-1 Class B-s1, d0, with clear PETG doors rated to BS 476 Part 7 Class 1Y. Dimensions 2400mm x 1200mm. Weight 42kg. Bold red felt surface that holds pins and staples behind two lockable shatterproof PETG doors, set in a satin silver anodised aluminium frame with rounded safety corners and snap-on corner covers, 20mm internal clearance, landscape orientation only, a concealed wall mount kit and a two year guarantee, made in the UK. Used by hospitals, factories, large schools and transport sites across the UK for safety-critical, high-traffic display. Also available in blue, green and grey, and in sizes from 600mm x 900mm up to this 2400mm x 1200mm. Displaysense, UK display product specialists since 1978. Free UK delivery.
Full specifications for the NB5024R fire-resistant tamperproof red felt noticeboard. The largest board in the range, a dual-door lockable, fire-certified display case with shatterproof PETG doors, a bold red felt pin and staple surface, a satin silver aluminium frame, concealed corner-cover fixings and a two year guarantee. Made in the UK for secure, high-visibility safety display on the longest walls. Each row pairs the detail with what it means for you, so nothing is left to guess before you place an order.
| Specification | Detail | What This Means for You |
|---|---|---|
| Colour / Finish | Bold red felt | The recognised colour for safety and alert, drawing the eye to fire actions and urgent notices on a large, busy board. |
| Board Size | 2400mm x 1200mm | The largest board in the range, covering the longest walls and holding a whole site's safety information in one display. |
| Weight | 42kg | The heaviest board in the range, needing two people to install and sitting firm on a solid wall once its concealed fixings are set. |
| Surface | Fire-rated red felt, pins and staples | Pin or staple notices anywhere across the wide felt once unlocked, with the weave recovering to keep a large red face even. |
| Doors | Dual lockable clear PETG, shatterproof | Two keyed doors lock the full span and split access in two, protecting every safety notice from tampering and knocks behind the glazing. |
| Frame | Satin silver aluminium, rounded safety corners | A tough, modern edge that resists marks on a large board and rounds its corners for a busy corridor or factory floor. |
| Internal Clearance | 20mm | Depth behind the doors for layered notices, laminated sheets or posters across the width rather than a single flat sheet. |
| Orientation | Landscape only | Mounts wider than it is tall, made for the longest corridor or concourse wall rather than a portrait fitting on a narrow one. |
| Fixings | Concealed wall mount kit, snap-on corner covers | The mounting parts and corner covers are supplied, so nothing extra is needed and the fitted board shows no exposed fixings. |
| Guarantee | 2 years | Two years of cover against everyday wear, giving hospitals, factories, schools and transport sites confidence in heavy use. |
| Fire Certification | BS 476 Class 0, BS EN 13501-1 Class B-s1, d0 | Tested as a complete composite, so the largest board backs a building's fire strategy in full, not just its materials. |
| Made In | United Kingdom | Designed and made in the UK with a UK support team behind it, keeping stock and aftercare close to hand for quick dispatch. |
Free delivery on every order, no minimum spend
UK Mainland standard delivery included on everything we sell.
Standard
Free
Always included, no minimum order
Express
£9.95
Express options shown at checkout where available
Lead time
3 to 5 days
Working days, UK Mainland
Returns
28 days
Original condition and packaging
Good to know
- Orders typically ship within 1 to 2 working days of placement
- Tracking email sent on dispatch
- Ground-floor, accessible delivery point
Returns must be unused and in original packaging. Full delivery information · Returns policy
Frequently Asked Questions About This Large Red Tamperproof Noticeboard
Q: What is the best large noticeboard for a hospital or safety-critical area?
A: Where information is safety-critical, the NB5024R is the board to choose. The largest at 2400mm, it carries two lockable doors over bold red felt, the colour that pulls attention to fire actions and warnings. Its whole-unit BS 476 Class 0 fire certification makes it fit for a hospital corridor, factory floor or escape route.
Q: What size is this noticeboard and how heavy is it?
A: 2400mm x 1200mm, weighing 42kg. This is the biggest board Displaysense makes in the tamperproof line. It is landscape-mounted, with 20mm behind the two doors for layered notices, and bold red felt spanning the full width for pins and staples.
Q: Is this board suitable for a hospital?
A: Yes. Hospitals use this board along corridors and in concourses for fire procedures, wayfinding, clinic times and patient safety notices. The 2400mm width keeps critical information in one run, the bold red flags the urgent items, and the composite fire certification meets NHS building standards.
Q: How do the two locking doors work on the largest board?
A: The front divides into two PETG doors, both worked by one key. A single door across 2400mm would be awkward, so a pair shares the width, each easy to open while both lock the full span shut. The glazing is shatterproof, with its own BS 476 Part 7 Class 1Y rating separate from the composite board certification.
Q: How does this compare with the 1800mm NB5018R?
A: The NB5024R spans 2400mm where the NB5018R runs to 1800mm, both locking behind two doors over red felt with identical BS 476 Class 0 composite certification. The larger board weighs 42kg against 35kg. Choose it for the longest safety-critical walls, and the smaller for a shorter run.
Q: Is this suitable for a factory or large school?
A: Yes. Factories and large schools use this board for hazard warnings, fire actions, shift briefings and safeguarding notices. Its width carries a whole site's safety information at once, the red marks what must not be missed, and the two locked doors keep the content accurate and approved.
Q: How do you keep safety notices on a large board from being tampered with?
A: Locking both doors keeps every safety notice fixed, since only staff hold the key. No fixings show at the front, hidden by snap-on corner covers, and the shatterproof PETG resists knocks. Across the full 2400mm span, the display stays exactly as it was set.
Q: How is a board this large fixed to the wall?
A: Fitting needs two people, as this is the heaviest board in the range at 42kg and mounts landscape only on a solid wall. The wall mount kit is included, with snap-on corner covers hiding the fixings. After that, unlocking a door lets notices go up or come down in seconds on pins or staples.
Q: How do you make safety notices stand out on a large board?
A: Red is the deciding factor. The bold red felt is the recognised colour for safety and alert, so a notice pinned to it registers faster than the same notice on a neutral board. On the largest size, that pull keeps fire actions and warnings prominent among routine notices, and the matt PETG keeps them glare-free.
Q: Do I need the largest size?
A: It comes down to the wall and how much must be shown. The 2400mm width suits a long corridor, factory floor or concourse with a great deal of safety and operational information in one place. A shorter wall is better matched to the 1800mm board or a smaller size. Locks and fire rating are shared across the range.
Q: Does this noticeboard come in other colours or sizes?
A: Yes. This 2400mm x 1200mm board also comes in blue, green and grey felt. Smaller options in the tamperproof range go down to 600mm x 900mm, with 1200mm and 1800mm boards in between, and every size keeps the lockable doors, fire-rated felt and BS 476 Class 0 composite rating.
Q: Is this noticeboard available with free UK delivery?
A: Yes. The board ships free to the UK mainland and is made in the UK. Displaysense has supplied hospitals, schools, councils and facilities teams since 1978, and every order carries a 28-day returns window, with a UK team available for advice.
Choosing a Board for Safety-Critical Display
When a board carries fire actions and safety information, the colour that flags urgency and a whole-unit fire rating matter as much as the size of the wall it fills. The guides below cover choosing a board for your space, how fire-compliant display works in schools and universities, and how colour shapes what people notice.
Overview
A Red Felt Noticeboard That Keeps Safety Notices Seen
Red carries a warning before a word on it is read, and across the largest board in the fire-resistant tamperproof range that signal does real work. The bold red felt pulls attention straight to fire procedures, safety notices and the warnings a busy building cannot let slip past, with the longest walls letting all of it sit in one secure run. Two lockable shatterproof doors hold every notice exactly where it was placed. The board earns its fire rating as a finished composite, tested as one unit rather than as separate materials, which is what a high-risk corridor or escape route depends on. Best suited for hospitals, factories and large schools where safety-critical information has to command attention and stay readable across a long, busy public wall.
Why Critical Notices Belong on a Red Noticeboard
- Red that flags what matters: On a safety wall the eye should reach the urgent notice first, and a red ground delivers that before a word is read. Fire actions and hazard warnings stand out at a glance, so the things that cannot be missed are never buried among routine paperwork.
- A key-locked door for each half: Two doors close the width rather than one, both turning on the same staff-held key. Every safety notice stays fixed where it was placed, and a half-width door stays light and quick to open even when the corridor in front is full.
- Room for a whole site's notices: Made for the longest walls, the board draws a site's fire, safety and operational information into one continuous run. People learn a single place to look for what matters, instead of checking several smaller boards spread around a building.
- Fire-rated as one whole board: Certification belongs to the finished unit, not the felt by itself, with the board tested complete to BS 476 Class 0 and to BS EN 13501-1 Class B-s1, d0. On an escape route a fire officer needs evidence for the object on the wall, and this carries exactly that.
- Clear PETG that will not shatter: Each door is glazed in clear PETG, a tough plastic with its own BS 476 Part 7 Class 1Y rating. It keeps notices flat and visible, stands up to the bumps of a crowded space, and will not break into shards the way a glass panel this large could under a knock.
- Pins and staples, right across the red: The red felt takes a pin or staple wherever a notice goes, so even the largest board fills fast and refreshes easily, the weave closing over old holes. It comes with a concealed wall mount kit, snap-on corner covers and a two year guarantee, all UK-made.
Where This Large Red Display Board Earns Its Place
| Hospital and Clinical Corridors | Fire procedures, infection-control notices and emergency information line a hospital corridor on the largest board, the bold red pulling the eye to the items that matter most and the locked doors keeping them fixed. |
| Factory and Warehouse Floors | Where a factory or warehouse runs to strict safety rules, a large red board carries hazard warnings, shift safety briefings and operational notices across a long wall, its colour flagging anything urgent at a glance. |
| Large School and College Sites | Across a large school or college site, a big red board gathers fire actions, safeguarding information and key notices in one place, the strong colour helping pupils and staff spot critical messages quickly. |
| Transport and Depot Buildings | Safety briefings, route notices and compliance information fill the largest board in a transport depot or bus garage, the long span holding a full set and the red marking what must not be missed. |
| Leisure Centres and Stadiums | Evacuation routes, capacity notices and event information run along a large red board in a leisure centre or stadium, the width suiting a high-footfall venue and the bold colour reading from a distance. |
| Escape Routes and Assembly Points | Along an escape route or near an assembly point, where signage is checked closely, the composite-certified board carries evacuation notices on a surface rated as a whole unit, the red reinforcing their urgency. |
Would a Shorter Board Fit Better?
Where a wall is shorter, the Fire Resistant Tamperproof Red Felt Noticeboard 1800mm x 1200mm brings the same dual-door, lockable, fire-certified build in a slightly smaller size. This board also comes in blue, green and grey to suit the setting. Order with free UK mainland delivery.
Call us on 01279460460 or send us your requirements and we will get back to you.
NB5024R is a Fire Resistant Tamperproof Red Felt Noticeboard from Displaysense. The largest board in the range, a dual-door lockable, fire-certified display case, independently tested as a full composite to BS 476 Class 0 and BS EN 13501-1 Class B-s1, d0, with clear PETG doors rated to BS 476 Part 7 Class 1Y. Dimensions 2400mm x 1200mm. Weight 42kg. Bold red felt surface that holds pins and staples behind two lockable shatterproof PETG doors, set in a satin silver anodised aluminium frame with rounded safety corners and snap-on corner covers, 20mm internal clearance, landscape orientation only, a concealed wall mount kit and a two year guarantee, made in the UK. Used by hospitals, factories, large schools and transport sites across the UK for safety-critical, high-traffic display. Also available in blue, green and grey, and in sizes from 600mm x 900mm up to this 2400mm x 1200mm. Displaysense, UK display product specialists since 1978. Free UK delivery.
Description
Here, red is a functional choice rather than a decorative one. As the universal signal for safety and alert, it makes a notice register as important the moment it is seen, which is exactly what fire actions, hazard warnings and emergency information need to do on a wall people pass without stopping. On the largest board in the range, that instant recognition keeps a critical message from being lost among rotas, menus and routine paperwork, because the eye goes to the red panel first. A neutral background leaves everything competing on equal terms, which is the last thing a safety notice can afford.
Size is the second half of what this board offers. Built to span the longest walls, it turns a major corridor, factory floor or concourse into one continuous display, holding what would otherwise need several separate boards dotted along the route. Bringing it together means staff and visitors check one place for safety and operational information rather than three, and the content stays consistent across the whole wall instead of contradicting itself from board to board. For a large site, that single point of truth is as valuable as the capacity it adds.
A safety notice is only useful while it stays accurate, which is why the board locks. The two doors share one key, kept by staff, so a passer-by cannot pull a notice down, cover it or swap it, while splitting the run into a pair leaves each door light enough to open in a crowd. Glazing both in shatterproof PETG rather than glass suits a knock-prone factory or corridor, taking impacts without shedding fragments, and the corner covers snap over the fixings so none are left exposed to tamper with.
Beneath the bold surface sits a fire specification that applies to the whole board, which an escape route demands. Tested as a single composite, it meets BS 476 Class 0 across Parts 6 and 7 and BS EN 13501-1 Class B-s1, d0, with each PETG door separately rated to BS 476 Part 7 Class 1Y, so the certificate covers the object on the wall, not its materials. Toughness comes from a satin silver aluminium frame and rounded safety corners built for a high-traffic wall, the red felt accepts pins and staples along its length, and the board fits landscape only. As the heaviest in the line, it needs two people to hang, supplied with a wall mount kit and a two year guarantee.
What Ships with This Noticeboard
- 1 x fire-resistant tamperproof red felt noticeboard with dual lockable PETG doors and keys
- 1 x concealed wall mount kit with snap-on corner covers
No Lock Needed at This Size?
Where a locked door is not needed, the Fire Resistant Red Felt Aluminium Framed Noticeboard 2400mm x 1200mm gives the same width and fire certification in an open framed board.
Call us on 01279460460 or send us your requirements and we will get back to you.
NB5024R is a Fire Resistant Tamperproof Red Felt Noticeboard from Displaysense. The largest board in the range, a dual-door lockable, fire-certified display case, independently tested as a full composite to BS 476 Class 0 and BS EN 13501-1 Class B-s1, d0, with clear PETG doors rated to BS 476 Part 7 Class 1Y. Dimensions 2400mm x 1200mm. Weight 42kg. Bold red felt surface that holds pins and staples behind two lockable shatterproof PETG doors, set in a satin silver anodised aluminium frame with rounded safety corners and snap-on corner covers, 20mm internal clearance, landscape orientation only, a concealed wall mount kit and a two year guarantee, made in the UK. Used by hospitals, factories, large schools and transport sites across the UK for safety-critical, high-traffic display. Also available in blue, green and grey, and in sizes from 600mm x 900mm up to this 2400mm x 1200mm. Displaysense, UK display product specialists since 1978. Free UK delivery.
Specifications
Full specifications for the NB5024R fire-resistant tamperproof red felt noticeboard. The largest board in the range, a dual-door lockable, fire-certified display case with shatterproof PETG doors, a bold red felt pin and staple surface, a satin silver aluminium frame, concealed corner-cover fixings and a two year guarantee. Made in the UK for secure, high-visibility safety display on the longest walls. Each row pairs the detail with what it means for you, so nothing is left to guess before you place an order.
| Specification | Detail | What This Means for You |
|---|---|---|
| Colour / Finish | Bold red felt | The recognised colour for safety and alert, drawing the eye to fire actions and urgent notices on a large, busy board. |
| Board Size | 2400mm x 1200mm | The largest board in the range, covering the longest walls and holding a whole site's safety information in one display. |
| Weight | 42kg | The heaviest board in the range, needing two people to install and sitting firm on a solid wall once its concealed fixings are set. |
| Surface | Fire-rated red felt, pins and staples | Pin or staple notices anywhere across the wide felt once unlocked, with the weave recovering to keep a large red face even. |
| Doors | Dual lockable clear PETG, shatterproof | Two keyed doors lock the full span and split access in two, protecting every safety notice from tampering and knocks behind the glazing. |
| Frame | Satin silver aluminium, rounded safety corners | A tough, modern edge that resists marks on a large board and rounds its corners for a busy corridor or factory floor. |
| Internal Clearance | 20mm | Depth behind the doors for layered notices, laminated sheets or posters across the width rather than a single flat sheet. |
| Orientation | Landscape only | Mounts wider than it is tall, made for the longest corridor or concourse wall rather than a portrait fitting on a narrow one. |
| Fixings | Concealed wall mount kit, snap-on corner covers | The mounting parts and corner covers are supplied, so nothing extra is needed and the fitted board shows no exposed fixings. |
| Guarantee | 2 years | Two years of cover against everyday wear, giving hospitals, factories, schools and transport sites confidence in heavy use. |
| Fire Certification | BS 476 Class 0, BS EN 13501-1 Class B-s1, d0 | Tested as a complete composite, so the largest board backs a building's fire strategy in full, not just its materials. |
| Made In | United Kingdom | Designed and made in the UK with a UK support team behind it, keeping stock and aftercare close to hand for quick dispatch. |
Delivery & Returns
Free delivery on every order, no minimum spend
UK Mainland standard delivery included on everything we sell.
Standard
Free
Always included, no minimum order
Express
£9.95
Express options shown at checkout where available
Lead time
3 to 5 days
Working days, UK Mainland
Returns
28 days
Original condition and packaging
Good to know
- Orders typically ship within 1 to 2 working days of placement
- Tracking email sent on dispatch
- Ground-floor, accessible delivery point
Returns must be unused and in original packaging. Full delivery information · Returns policy
FAQs
Frequently Asked Questions About This Large Red Tamperproof Noticeboard
Q: What is the best large noticeboard for a hospital or safety-critical area?
A: Where information is safety-critical, the NB5024R is the board to choose. The largest at 2400mm, it carries two lockable doors over bold red felt, the colour that pulls attention to fire actions and warnings. Its whole-unit BS 476 Class 0 fire certification makes it fit for a hospital corridor, factory floor or escape route.
Q: What size is this noticeboard and how heavy is it?
A: 2400mm x 1200mm, weighing 42kg. This is the biggest board Displaysense makes in the tamperproof line. It is landscape-mounted, with 20mm behind the two doors for layered notices, and bold red felt spanning the full width for pins and staples.
Q: Is this board suitable for a hospital?
A: Yes. Hospitals use this board along corridors and in concourses for fire procedures, wayfinding, clinic times and patient safety notices. The 2400mm width keeps critical information in one run, the bold red flags the urgent items, and the composite fire certification meets NHS building standards.
Q: How do the two locking doors work on the largest board?
A: The front divides into two PETG doors, both worked by one key. A single door across 2400mm would be awkward, so a pair shares the width, each easy to open while both lock the full span shut. The glazing is shatterproof, with its own BS 476 Part 7 Class 1Y rating separate from the composite board certification.
Q: How does this compare with the 1800mm NB5018R?
A: The NB5024R spans 2400mm where the NB5018R runs to 1800mm, both locking behind two doors over red felt with identical BS 476 Class 0 composite certification. The larger board weighs 42kg against 35kg. Choose it for the longest safety-critical walls, and the smaller for a shorter run.
Q: Is this suitable for a factory or large school?
A: Yes. Factories and large schools use this board for hazard warnings, fire actions, shift briefings and safeguarding notices. Its width carries a whole site's safety information at once, the red marks what must not be missed, and the two locked doors keep the content accurate and approved.
Q: How do you keep safety notices on a large board from being tampered with?
A: Locking both doors keeps every safety notice fixed, since only staff hold the key. No fixings show at the front, hidden by snap-on corner covers, and the shatterproof PETG resists knocks. Across the full 2400mm span, the display stays exactly as it was set.
Q: How is a board this large fixed to the wall?
A: Fitting needs two people, as this is the heaviest board in the range at 42kg and mounts landscape only on a solid wall. The wall mount kit is included, with snap-on corner covers hiding the fixings. After that, unlocking a door lets notices go up or come down in seconds on pins or staples.
Q: How do you make safety notices stand out on a large board?
A: Red is the deciding factor. The bold red felt is the recognised colour for safety and alert, so a notice pinned to it registers faster than the same notice on a neutral board. On the largest size, that pull keeps fire actions and warnings prominent among routine notices, and the matt PETG keeps them glare-free.
Q: Do I need the largest size?
A: It comes down to the wall and how much must be shown. The 2400mm width suits a long corridor, factory floor or concourse with a great deal of safety and operational information in one place. A shorter wall is better matched to the 1800mm board or a smaller size. Locks and fire rating are shared across the range.
Q: Does this noticeboard come in other colours or sizes?
A: Yes. This 2400mm x 1200mm board also comes in blue, green and grey felt. Smaller options in the tamperproof range go down to 600mm x 900mm, with 1200mm and 1800mm boards in between, and every size keeps the lockable doors, fire-rated felt and BS 476 Class 0 composite rating.
Q: Is this noticeboard available with free UK delivery?
A: Yes. The board ships free to the UK mainland and is made in the UK. Displaysense has supplied hospitals, schools, councils and facilities teams since 1978, and every order carries a 28-day returns window, with a UK team available for advice.
Knowledge Hub
Choosing a Board for Safety-Critical Display
When a board carries fire actions and safety information, the colour that flags urgency and a whole-unit fire rating matter as much as the size of the wall it fills. The guides below cover choosing a board for your space, how fire-compliant display works in schools and universities, and how colour shapes what people notice.
Fire Retardant Tamperproof Red Felt Noticeboard - 2400mm x 1200mm
| Quantity | Discount | Save |
|---|---|---|
| 5 - 9 | 3% off | £16.47 |
| 10 + | 5% off | £27.45 |
Overview
Description
Specifications
Delivery & Returns
FAQs
Knowledge Hub
A Red Felt Noticeboard That Keeps Safety Notices Seen
Red carries a warning before a word on it is read, and across the largest board in the fire-resistant tamperproof range that signal does real work. The bold red felt pulls attention straight to fire procedures, safety notices and the warnings a busy building cannot let slip past, with the longest walls letting all of it sit in one secure run. Two lockable shatterproof doors hold every notice exactly where it was placed. The board earns its fire rating as a finished composite, tested as one unit rather than as separate materials, which is what a high-risk corridor or escape route depends on. Best suited for hospitals, factories and large schools where safety-critical information has to command attention and stay readable across a long, busy public wall.
Why Critical Notices Belong on a Red Noticeboard
- Red that flags what matters: On a safety wall the eye should reach the urgent notice first, and a red ground delivers that before a word is read. Fire actions and hazard warnings stand out at a glance, so the things that cannot be missed are never buried among routine paperwork.
- A key-locked door for each half: Two doors close the width rather than one, both turning on the same staff-held key. Every safety notice stays fixed where it was placed, and a half-width door stays light and quick to open even when the corridor in front is full.
- Room for a whole site's notices: Made for the longest walls, the board draws a site's fire, safety and operational information into one continuous run. People learn a single place to look for what matters, instead of checking several smaller boards spread around a building.
- Fire-rated as one whole board: Certification belongs to the finished unit, not the felt by itself, with the board tested complete to BS 476 Class 0 and to BS EN 13501-1 Class B-s1, d0. On an escape route a fire officer needs evidence for the object on the wall, and this carries exactly that.
- Clear PETG that will not shatter: Each door is glazed in clear PETG, a tough plastic with its own BS 476 Part 7 Class 1Y rating. It keeps notices flat and visible, stands up to the bumps of a crowded space, and will not break into shards the way a glass panel this large could under a knock.
- Pins and staples, right across the red: The red felt takes a pin or staple wherever a notice goes, so even the largest board fills fast and refreshes easily, the weave closing over old holes. It comes with a concealed wall mount kit, snap-on corner covers and a two year guarantee, all UK-made.
Where This Large Red Display Board Earns Its Place
| Hospital and Clinical Corridors | Fire procedures, infection-control notices and emergency information line a hospital corridor on the largest board, the bold red pulling the eye to the items that matter most and the locked doors keeping them fixed. |
| Factory and Warehouse Floors | Where a factory or warehouse runs to strict safety rules, a large red board carries hazard warnings, shift safety briefings and operational notices across a long wall, its colour flagging anything urgent at a glance. |
| Large School and College Sites | Across a large school or college site, a big red board gathers fire actions, safeguarding information and key notices in one place, the strong colour helping pupils and staff spot critical messages quickly. |
| Transport and Depot Buildings | Safety briefings, route notices and compliance information fill the largest board in a transport depot or bus garage, the long span holding a full set and the red marking what must not be missed. |
| Leisure Centres and Stadiums | Evacuation routes, capacity notices and event information run along a large red board in a leisure centre or stadium, the width suiting a high-footfall venue and the bold colour reading from a distance. |
| Escape Routes and Assembly Points | Along an escape route or near an assembly point, where signage is checked closely, the composite-certified board carries evacuation notices on a surface rated as a whole unit, the red reinforcing their urgency. |
Would a Shorter Board Fit Better?
Where a wall is shorter, the Fire Resistant Tamperproof Red Felt Noticeboard 1800mm x 1200mm brings the same dual-door, lockable, fire-certified build in a slightly smaller size. This board also comes in blue, green and grey to suit the setting. Order with free UK mainland delivery.
Call us on 01279460460 or send us your requirements and we will get back to you.
NB5024R is a Fire Resistant Tamperproof Red Felt Noticeboard from Displaysense. The largest board in the range, a dual-door lockable, fire-certified display case, independently tested as a full composite to BS 476 Class 0 and BS EN 13501-1 Class B-s1, d0, with clear PETG doors rated to BS 476 Part 7 Class 1Y. Dimensions 2400mm x 1200mm. Weight 42kg. Bold red felt surface that holds pins and staples behind two lockable shatterproof PETG doors, set in a satin silver anodised aluminium frame with rounded safety corners and snap-on corner covers, 20mm internal clearance, landscape orientation only, a concealed wall mount kit and a two year guarantee, made in the UK. Used by hospitals, factories, large schools and transport sites across the UK for safety-critical, high-traffic display. Also available in blue, green and grey, and in sizes from 600mm x 900mm up to this 2400mm x 1200mm. Displaysense, UK display product specialists since 1978. Free UK delivery.
Here, red is a functional choice rather than a decorative one. As the universal signal for safety and alert, it makes a notice register as important the moment it is seen, which is exactly what fire actions, hazard warnings and emergency information need to do on a wall people pass without stopping. On the largest board in the range, that instant recognition keeps a critical message from being lost among rotas, menus and routine paperwork, because the eye goes to the red panel first. A neutral background leaves everything competing on equal terms, which is the last thing a safety notice can afford.
Size is the second half of what this board offers. Built to span the longest walls, it turns a major corridor, factory floor or concourse into one continuous display, holding what would otherwise need several separate boards dotted along the route. Bringing it together means staff and visitors check one place for safety and operational information rather than three, and the content stays consistent across the whole wall instead of contradicting itself from board to board. For a large site, that single point of truth is as valuable as the capacity it adds.
A safety notice is only useful while it stays accurate, which is why the board locks. The two doors share one key, kept by staff, so a passer-by cannot pull a notice down, cover it or swap it, while splitting the run into a pair leaves each door light enough to open in a crowd. Glazing both in shatterproof PETG rather than glass suits a knock-prone factory or corridor, taking impacts without shedding fragments, and the corner covers snap over the fixings so none are left exposed to tamper with.
Beneath the bold surface sits a fire specification that applies to the whole board, which an escape route demands. Tested as a single composite, it meets BS 476 Class 0 across Parts 6 and 7 and BS EN 13501-1 Class B-s1, d0, with each PETG door separately rated to BS 476 Part 7 Class 1Y, so the certificate covers the object on the wall, not its materials. Toughness comes from a satin silver aluminium frame and rounded safety corners built for a high-traffic wall, the red felt accepts pins and staples along its length, and the board fits landscape only. As the heaviest in the line, it needs two people to hang, supplied with a wall mount kit and a two year guarantee.
What Ships with This Noticeboard
- 1 x fire-resistant tamperproof red felt noticeboard with dual lockable PETG doors and keys
- 1 x concealed wall mount kit with snap-on corner covers
No Lock Needed at This Size?
Where a locked door is not needed, the Fire Resistant Red Felt Aluminium Framed Noticeboard 2400mm x 1200mm gives the same width and fire certification in an open framed board.
Call us on 01279460460 or send us your requirements and we will get back to you.
NB5024R is a Fire Resistant Tamperproof Red Felt Noticeboard from Displaysense. The largest board in the range, a dual-door lockable, fire-certified display case, independently tested as a full composite to BS 476 Class 0 and BS EN 13501-1 Class B-s1, d0, with clear PETG doors rated to BS 476 Part 7 Class 1Y. Dimensions 2400mm x 1200mm. Weight 42kg. Bold red felt surface that holds pins and staples behind two lockable shatterproof PETG doors, set in a satin silver anodised aluminium frame with rounded safety corners and snap-on corner covers, 20mm internal clearance, landscape orientation only, a concealed wall mount kit and a two year guarantee, made in the UK. Used by hospitals, factories, large schools and transport sites across the UK for safety-critical, high-traffic display. Also available in blue, green and grey, and in sizes from 600mm x 900mm up to this 2400mm x 1200mm. Displaysense, UK display product specialists since 1978. Free UK delivery.
Full specifications for the NB5024R fire-resistant tamperproof red felt noticeboard. The largest board in the range, a dual-door lockable, fire-certified display case with shatterproof PETG doors, a bold red felt pin and staple surface, a satin silver aluminium frame, concealed corner-cover fixings and a two year guarantee. Made in the UK for secure, high-visibility safety display on the longest walls. Each row pairs the detail with what it means for you, so nothing is left to guess before you place an order.
| Specification | Detail | What This Means for You |
|---|---|---|
| Colour / Finish | Bold red felt | The recognised colour for safety and alert, drawing the eye to fire actions and urgent notices on a large, busy board. |
| Board Size | 2400mm x 1200mm | The largest board in the range, covering the longest walls and holding a whole site's safety information in one display. |
| Weight | 42kg | The heaviest board in the range, needing two people to install and sitting firm on a solid wall once its concealed fixings are set. |
| Surface | Fire-rated red felt, pins and staples | Pin or staple notices anywhere across the wide felt once unlocked, with the weave recovering to keep a large red face even. |
| Doors | Dual lockable clear PETG, shatterproof | Two keyed doors lock the full span and split access in two, protecting every safety notice from tampering and knocks behind the glazing. |
| Frame | Satin silver aluminium, rounded safety corners | A tough, modern edge that resists marks on a large board and rounds its corners for a busy corridor or factory floor. |
| Internal Clearance | 20mm | Depth behind the doors for layered notices, laminated sheets or posters across the width rather than a single flat sheet. |
| Orientation | Landscape only | Mounts wider than it is tall, made for the longest corridor or concourse wall rather than a portrait fitting on a narrow one. |
| Fixings | Concealed wall mount kit, snap-on corner covers | The mounting parts and corner covers are supplied, so nothing extra is needed and the fitted board shows no exposed fixings. |
| Guarantee | 2 years | Two years of cover against everyday wear, giving hospitals, factories, schools and transport sites confidence in heavy use. |
| Fire Certification | BS 476 Class 0, BS EN 13501-1 Class B-s1, d0 | Tested as a complete composite, so the largest board backs a building's fire strategy in full, not just its materials. |
| Made In | United Kingdom | Designed and made in the UK with a UK support team behind it, keeping stock and aftercare close to hand for quick dispatch. |
Free delivery on every order, no minimum spend
UK Mainland standard delivery included on everything we sell.
Standard
Free
Always included, no minimum order
Express
£9.95
Express options shown at checkout where available
Lead time
3 to 5 days
Working days, UK Mainland
Returns
28 days
Original condition and packaging
Good to know
- Orders typically ship within 1 to 2 working days of placement
- Tracking email sent on dispatch
- Ground-floor, accessible delivery point
Returns must be unused and in original packaging. Full delivery information · Returns policy
Frequently Asked Questions About This Large Red Tamperproof Noticeboard
Q: What is the best large noticeboard for a hospital or safety-critical area?
A: Where information is safety-critical, the NB5024R is the board to choose. The largest at 2400mm, it carries two lockable doors over bold red felt, the colour that pulls attention to fire actions and warnings. Its whole-unit BS 476 Class 0 fire certification makes it fit for a hospital corridor, factory floor or escape route.
Q: What size is this noticeboard and how heavy is it?
A: 2400mm x 1200mm, weighing 42kg. This is the biggest board Displaysense makes in the tamperproof line. It is landscape-mounted, with 20mm behind the two doors for layered notices, and bold red felt spanning the full width for pins and staples.
Q: Is this board suitable for a hospital?
A: Yes. Hospitals use this board along corridors and in concourses for fire procedures, wayfinding, clinic times and patient safety notices. The 2400mm width keeps critical information in one run, the bold red flags the urgent items, and the composite fire certification meets NHS building standards.
Q: How do the two locking doors work on the largest board?
A: The front divides into two PETG doors, both worked by one key. A single door across 2400mm would be awkward, so a pair shares the width, each easy to open while both lock the full span shut. The glazing is shatterproof, with its own BS 476 Part 7 Class 1Y rating separate from the composite board certification.
Q: How does this compare with the 1800mm NB5018R?
A: The NB5024R spans 2400mm where the NB5018R runs to 1800mm, both locking behind two doors over red felt with identical BS 476 Class 0 composite certification. The larger board weighs 42kg against 35kg. Choose it for the longest safety-critical walls, and the smaller for a shorter run.
Q: Is this suitable for a factory or large school?
A: Yes. Factories and large schools use this board for hazard warnings, fire actions, shift briefings and safeguarding notices. Its width carries a whole site's safety information at once, the red marks what must not be missed, and the two locked doors keep the content accurate and approved.
Q: How do you keep safety notices on a large board from being tampered with?
A: Locking both doors keeps every safety notice fixed, since only staff hold the key. No fixings show at the front, hidden by snap-on corner covers, and the shatterproof PETG resists knocks. Across the full 2400mm span, the display stays exactly as it was set.
Q: How is a board this large fixed to the wall?
A: Fitting needs two people, as this is the heaviest board in the range at 42kg and mounts landscape only on a solid wall. The wall mount kit is included, with snap-on corner covers hiding the fixings. After that, unlocking a door lets notices go up or come down in seconds on pins or staples.
Q: How do you make safety notices stand out on a large board?
A: Red is the deciding factor. The bold red felt is the recognised colour for safety and alert, so a notice pinned to it registers faster than the same notice on a neutral board. On the largest size, that pull keeps fire actions and warnings prominent among routine notices, and the matt PETG keeps them glare-free.
Q: Do I need the largest size?
A: It comes down to the wall and how much must be shown. The 2400mm width suits a long corridor, factory floor or concourse with a great deal of safety and operational information in one place. A shorter wall is better matched to the 1800mm board or a smaller size. Locks and fire rating are shared across the range.
Q: Does this noticeboard come in other colours or sizes?
A: Yes. This 2400mm x 1200mm board also comes in blue, green and grey felt. Smaller options in the tamperproof range go down to 600mm x 900mm, with 1200mm and 1800mm boards in between, and every size keeps the lockable doors, fire-rated felt and BS 476 Class 0 composite rating.
Q: Is this noticeboard available with free UK delivery?
A: Yes. The board ships free to the UK mainland and is made in the UK. Displaysense has supplied hospitals, schools, councils and facilities teams since 1978, and every order carries a 28-day returns window, with a UK team available for advice.
Choosing a Board for Safety-Critical Display
When a board carries fire actions and safety information, the colour that flags urgency and a whole-unit fire rating matter as much as the size of the wall it fills. The guides below cover choosing a board for your space, how fire-compliant display works in schools and universities, and how colour shapes what people notice.
Overview
A Red Felt Noticeboard That Keeps Safety Notices Seen
Red carries a warning before a word on it is read, and across the largest board in the fire-resistant tamperproof range that signal does real work. The bold red felt pulls attention straight to fire procedures, safety notices and the warnings a busy building cannot let slip past, with the longest walls letting all of it sit in one secure run. Two lockable shatterproof doors hold every notice exactly where it was placed. The board earns its fire rating as a finished composite, tested as one unit rather than as separate materials, which is what a high-risk corridor or escape route depends on. Best suited for hospitals, factories and large schools where safety-critical information has to command attention and stay readable across a long, busy public wall.
Why Critical Notices Belong on a Red Noticeboard
- Red that flags what matters: On a safety wall the eye should reach the urgent notice first, and a red ground delivers that before a word is read. Fire actions and hazard warnings stand out at a glance, so the things that cannot be missed are never buried among routine paperwork.
- A key-locked door for each half: Two doors close the width rather than one, both turning on the same staff-held key. Every safety notice stays fixed where it was placed, and a half-width door stays light and quick to open even when the corridor in front is full.
- Room for a whole site's notices: Made for the longest walls, the board draws a site's fire, safety and operational information into one continuous run. People learn a single place to look for what matters, instead of checking several smaller boards spread around a building.
- Fire-rated as one whole board: Certification belongs to the finished unit, not the felt by itself, with the board tested complete to BS 476 Class 0 and to BS EN 13501-1 Class B-s1, d0. On an escape route a fire officer needs evidence for the object on the wall, and this carries exactly that.
- Clear PETG that will not shatter: Each door is glazed in clear PETG, a tough plastic with its own BS 476 Part 7 Class 1Y rating. It keeps notices flat and visible, stands up to the bumps of a crowded space, and will not break into shards the way a glass panel this large could under a knock.
- Pins and staples, right across the red: The red felt takes a pin or staple wherever a notice goes, so even the largest board fills fast and refreshes easily, the weave closing over old holes. It comes with a concealed wall mount kit, snap-on corner covers and a two year guarantee, all UK-made.
Where This Large Red Display Board Earns Its Place
| Hospital and Clinical Corridors | Fire procedures, infection-control notices and emergency information line a hospital corridor on the largest board, the bold red pulling the eye to the items that matter most and the locked doors keeping them fixed. |
| Factory and Warehouse Floors | Where a factory or warehouse runs to strict safety rules, a large red board carries hazard warnings, shift safety briefings and operational notices across a long wall, its colour flagging anything urgent at a glance. |
| Large School and College Sites | Across a large school or college site, a big red board gathers fire actions, safeguarding information and key notices in one place, the strong colour helping pupils and staff spot critical messages quickly. |
| Transport and Depot Buildings | Safety briefings, route notices and compliance information fill the largest board in a transport depot or bus garage, the long span holding a full set and the red marking what must not be missed. |
| Leisure Centres and Stadiums | Evacuation routes, capacity notices and event information run along a large red board in a leisure centre or stadium, the width suiting a high-footfall venue and the bold colour reading from a distance. |
| Escape Routes and Assembly Points | Along an escape route or near an assembly point, where signage is checked closely, the composite-certified board carries evacuation notices on a surface rated as a whole unit, the red reinforcing their urgency. |
Would a Shorter Board Fit Better?
Where a wall is shorter, the Fire Resistant Tamperproof Red Felt Noticeboard 1800mm x 1200mm brings the same dual-door, lockable, fire-certified build in a slightly smaller size. This board also comes in blue, green and grey to suit the setting. Order with free UK mainland delivery.
Call us on 01279460460 or send us your requirements and we will get back to you.
NB5024R is a Fire Resistant Tamperproof Red Felt Noticeboard from Displaysense. The largest board in the range, a dual-door lockable, fire-certified display case, independently tested as a full composite to BS 476 Class 0 and BS EN 13501-1 Class B-s1, d0, with clear PETG doors rated to BS 476 Part 7 Class 1Y. Dimensions 2400mm x 1200mm. Weight 42kg. Bold red felt surface that holds pins and staples behind two lockable shatterproof PETG doors, set in a satin silver anodised aluminium frame with rounded safety corners and snap-on corner covers, 20mm internal clearance, landscape orientation only, a concealed wall mount kit and a two year guarantee, made in the UK. Used by hospitals, factories, large schools and transport sites across the UK for safety-critical, high-traffic display. Also available in blue, green and grey, and in sizes from 600mm x 900mm up to this 2400mm x 1200mm. Displaysense, UK display product specialists since 1978. Free UK delivery.
Description
Here, red is a functional choice rather than a decorative one. As the universal signal for safety and alert, it makes a notice register as important the moment it is seen, which is exactly what fire actions, hazard warnings and emergency information need to do on a wall people pass without stopping. On the largest board in the range, that instant recognition keeps a critical message from being lost among rotas, menus and routine paperwork, because the eye goes to the red panel first. A neutral background leaves everything competing on equal terms, which is the last thing a safety notice can afford.
Size is the second half of what this board offers. Built to span the longest walls, it turns a major corridor, factory floor or concourse into one continuous display, holding what would otherwise need several separate boards dotted along the route. Bringing it together means staff and visitors check one place for safety and operational information rather than three, and the content stays consistent across the whole wall instead of contradicting itself from board to board. For a large site, that single point of truth is as valuable as the capacity it adds.
A safety notice is only useful while it stays accurate, which is why the board locks. The two doors share one key, kept by staff, so a passer-by cannot pull a notice down, cover it or swap it, while splitting the run into a pair leaves each door light enough to open in a crowd. Glazing both in shatterproof PETG rather than glass suits a knock-prone factory or corridor, taking impacts without shedding fragments, and the corner covers snap over the fixings so none are left exposed to tamper with.
Beneath the bold surface sits a fire specification that applies to the whole board, which an escape route demands. Tested as a single composite, it meets BS 476 Class 0 across Parts 6 and 7 and BS EN 13501-1 Class B-s1, d0, with each PETG door separately rated to BS 476 Part 7 Class 1Y, so the certificate covers the object on the wall, not its materials. Toughness comes from a satin silver aluminium frame and rounded safety corners built for a high-traffic wall, the red felt accepts pins and staples along its length, and the board fits landscape only. As the heaviest in the line, it needs two people to hang, supplied with a wall mount kit and a two year guarantee.
What Ships with This Noticeboard
- 1 x fire-resistant tamperproof red felt noticeboard with dual lockable PETG doors and keys
- 1 x concealed wall mount kit with snap-on corner covers
No Lock Needed at This Size?
Where a locked door is not needed, the Fire Resistant Red Felt Aluminium Framed Noticeboard 2400mm x 1200mm gives the same width and fire certification in an open framed board.
Call us on 01279460460 or send us your requirements and we will get back to you.
NB5024R is a Fire Resistant Tamperproof Red Felt Noticeboard from Displaysense. The largest board in the range, a dual-door lockable, fire-certified display case, independently tested as a full composite to BS 476 Class 0 and BS EN 13501-1 Class B-s1, d0, with clear PETG doors rated to BS 476 Part 7 Class 1Y. Dimensions 2400mm x 1200mm. Weight 42kg. Bold red felt surface that holds pins and staples behind two lockable shatterproof PETG doors, set in a satin silver anodised aluminium frame with rounded safety corners and snap-on corner covers, 20mm internal clearance, landscape orientation only, a concealed wall mount kit and a two year guarantee, made in the UK. Used by hospitals, factories, large schools and transport sites across the UK for safety-critical, high-traffic display. Also available in blue, green and grey, and in sizes from 600mm x 900mm up to this 2400mm x 1200mm. Displaysense, UK display product specialists since 1978. Free UK delivery.
Specifications
Full specifications for the NB5024R fire-resistant tamperproof red felt noticeboard. The largest board in the range, a dual-door lockable, fire-certified display case with shatterproof PETG doors, a bold red felt pin and staple surface, a satin silver aluminium frame, concealed corner-cover fixings and a two year guarantee. Made in the UK for secure, high-visibility safety display on the longest walls. Each row pairs the detail with what it means for you, so nothing is left to guess before you place an order.
| Specification | Detail | What This Means for You |
|---|---|---|
| Colour / Finish | Bold red felt | The recognised colour for safety and alert, drawing the eye to fire actions and urgent notices on a large, busy board. |
| Board Size | 2400mm x 1200mm | The largest board in the range, covering the longest walls and holding a whole site's safety information in one display. |
| Weight | 42kg | The heaviest board in the range, needing two people to install and sitting firm on a solid wall once its concealed fixings are set. |
| Surface | Fire-rated red felt, pins and staples | Pin or staple notices anywhere across the wide felt once unlocked, with the weave recovering to keep a large red face even. |
| Doors | Dual lockable clear PETG, shatterproof | Two keyed doors lock the full span and split access in two, protecting every safety notice from tampering and knocks behind the glazing. |
| Frame | Satin silver aluminium, rounded safety corners | A tough, modern edge that resists marks on a large board and rounds its corners for a busy corridor or factory floor. |
| Internal Clearance | 20mm | Depth behind the doors for layered notices, laminated sheets or posters across the width rather than a single flat sheet. |
| Orientation | Landscape only | Mounts wider than it is tall, made for the longest corridor or concourse wall rather than a portrait fitting on a narrow one. |
| Fixings | Concealed wall mount kit, snap-on corner covers | The mounting parts and corner covers are supplied, so nothing extra is needed and the fitted board shows no exposed fixings. |
| Guarantee | 2 years | Two years of cover against everyday wear, giving hospitals, factories, schools and transport sites confidence in heavy use. |
| Fire Certification | BS 476 Class 0, BS EN 13501-1 Class B-s1, d0 | Tested as a complete composite, so the largest board backs a building's fire strategy in full, not just its materials. |
| Made In | United Kingdom | Designed and made in the UK with a UK support team behind it, keeping stock and aftercare close to hand for quick dispatch. |
Delivery & Returns
Free delivery on every order, no minimum spend
UK Mainland standard delivery included on everything we sell.
Standard
Free
Always included, no minimum order
Express
£9.95
Express options shown at checkout where available
Lead time
3 to 5 days
Working days, UK Mainland
Returns
28 days
Original condition and packaging
Good to know
- Orders typically ship within 1 to 2 working days of placement
- Tracking email sent on dispatch
- Ground-floor, accessible delivery point
Returns must be unused and in original packaging. Full delivery information · Returns policy
FAQs
Frequently Asked Questions About This Large Red Tamperproof Noticeboard
Q: What is the best large noticeboard for a hospital or safety-critical area?
A: Where information is safety-critical, the NB5024R is the board to choose. The largest at 2400mm, it carries two lockable doors over bold red felt, the colour that pulls attention to fire actions and warnings. Its whole-unit BS 476 Class 0 fire certification makes it fit for a hospital corridor, factory floor or escape route.
Q: What size is this noticeboard and how heavy is it?
A: 2400mm x 1200mm, weighing 42kg. This is the biggest board Displaysense makes in the tamperproof line. It is landscape-mounted, with 20mm behind the two doors for layered notices, and bold red felt spanning the full width for pins and staples.
Q: Is this board suitable for a hospital?
A: Yes. Hospitals use this board along corridors and in concourses for fire procedures, wayfinding, clinic times and patient safety notices. The 2400mm width keeps critical information in one run, the bold red flags the urgent items, and the composite fire certification meets NHS building standards.
Q: How do the two locking doors work on the largest board?
A: The front divides into two PETG doors, both worked by one key. A single door across 2400mm would be awkward, so a pair shares the width, each easy to open while both lock the full span shut. The glazing is shatterproof, with its own BS 476 Part 7 Class 1Y rating separate from the composite board certification.
Q: How does this compare with the 1800mm NB5018R?
A: The NB5024R spans 2400mm where the NB5018R runs to 1800mm, both locking behind two doors over red felt with identical BS 476 Class 0 composite certification. The larger board weighs 42kg against 35kg. Choose it for the longest safety-critical walls, and the smaller for a shorter run.
Q: Is this suitable for a factory or large school?
A: Yes. Factories and large schools use this board for hazard warnings, fire actions, shift briefings and safeguarding notices. Its width carries a whole site's safety information at once, the red marks what must not be missed, and the two locked doors keep the content accurate and approved.
Q: How do you keep safety notices on a large board from being tampered with?
A: Locking both doors keeps every safety notice fixed, since only staff hold the key. No fixings show at the front, hidden by snap-on corner covers, and the shatterproof PETG resists knocks. Across the full 2400mm span, the display stays exactly as it was set.
Q: How is a board this large fixed to the wall?
A: Fitting needs two people, as this is the heaviest board in the range at 42kg and mounts landscape only on a solid wall. The wall mount kit is included, with snap-on corner covers hiding the fixings. After that, unlocking a door lets notices go up or come down in seconds on pins or staples.
Q: How do you make safety notices stand out on a large board?
A: Red is the deciding factor. The bold red felt is the recognised colour for safety and alert, so a notice pinned to it registers faster than the same notice on a neutral board. On the largest size, that pull keeps fire actions and warnings prominent among routine notices, and the matt PETG keeps them glare-free.
Q: Do I need the largest size?
A: It comes down to the wall and how much must be shown. The 2400mm width suits a long corridor, factory floor or concourse with a great deal of safety and operational information in one place. A shorter wall is better matched to the 1800mm board or a smaller size. Locks and fire rating are shared across the range.
Q: Does this noticeboard come in other colours or sizes?
A: Yes. This 2400mm x 1200mm board also comes in blue, green and grey felt. Smaller options in the tamperproof range go down to 600mm x 900mm, with 1200mm and 1800mm boards in between, and every size keeps the lockable doors, fire-rated felt and BS 476 Class 0 composite rating.
Q: Is this noticeboard available with free UK delivery?
A: Yes. The board ships free to the UK mainland and is made in the UK. Displaysense has supplied hospitals, schools, councils and facilities teams since 1978, and every order carries a 28-day returns window, with a UK team available for advice.
Knowledge Hub
Choosing a Board for Safety-Critical Display
When a board carries fire actions and safety information, the colour that flags urgency and a whole-unit fire rating matter as much as the size of the wall it fills. The guides below cover choosing a board for your space, how fire-compliant display works in schools and universities, and how colour shapes what people notice.
