Overview
Description
Specifications
Delivery & Returns
FAQs
Knowledge Hub
Pack of 10 Black Wooden Menu Holder Blocks (210mm) for A4 Menus, Clipboards and Hospitality Signage
A full A4 menu is a substantial piece of printed collateral. It carries the complete food offering, the wine list, the cocktail programme or the multi-page tasting menu. Drop that card into a holder designed for something smaller and it wobbles, leans and eventually tips the entire stand forward onto the table. The CWB210BK 210mm wooden menu holder block is the heavyweight base that A4 demands. At 210mm wide, the block matches the full width of an A4 portrait card, providing maximum grip across the entire bottom edge. The solid European Redwood construction creates a dense, low centre of gravity that keeps heavy multi-page menus, tall clipboards and rigid acrylic inserts standing planted and upright through the busiest service.
Supplied as a pack of 10 in satin black FSC-approved timber. Ten tables, ten counters or ten display positions standardised in a single delivery. The master menu grip for venues that take their printed collateral seriously.
What the Block Does That Plastic Holders Cannot
- 210mm width for full A4 portrait grip: This is the largest block in the range, purpose-built for A4 portrait menus (210mm wide) and A5 landscape cards (210mm wide). The full-width grip means the card sits centred with equal support across its entire base edge. No wobble. No lean. No tipping forward when a guest pulls the menu toward them to read the dessert page.
- Solid European Redwood as a low-gravity anchor: The 40 x 40mm timber block is dense and heavy for its size. That density creates a low centre of gravity that holds tall A4 cards, multi-page clipboarded menus and rigid acrylic inserts firmly upright. On an alfresco table where the wind catches the card, on a bar counter where a pint glass bumps the base, on a busy cafe table where children reach across, the block stays planted. The menu stays standing.
- 3mm deep-cut slot for frictionless one-second updates: The 3mm groove runs the full 210mm width and sits 20mm deep into the block. Drop the card in. It stands. Pull it out. Drop the replacement in. One second. No tight acrylic sleeves that crinkle the corners. No clips that leave marks. No dog-eared edges from forcing paper into an undersized pocket. The slot is a "drop and go" system built for the speed that daily specials, rotating promotions and event-by-event table plans demand.
- Satin black finish for stealth presentation: Unpainted pine looks unfinished and stains the moment coffee lands on it. The satin black finish hides fingerprints, coffee rings and table marks while vanishing visually beneath the card it holds. The customer sees the menu, the product card or the table number. The block disappears. That invisible support is the entire design intention.
- Frameless tactile experience: There is no plastic sleeve, no acrylic cover and no bulky frame between the customer and the card. The menu sits openly in the block, inviting touch. Venues that print on heavy, textured artisan cardstock, embossed letterpress or hand-finished stock want customers to feel the quality. This block allows that tactile interaction instead of sealing it behind a scratched plastic barrier.
- Pack of 10 for instant venue-wide standardisation: Mismatched holders across a dining room undermine the interior design. Ten identical blocks deployed across ten tables, ten bar positions or ten retail display points create the unified, cohesive visual standard that premium hospitality and boutique retail depend on. One delivery, one aesthetic, every surface consistent.
- FSC-approved sustainable European Redwood, UK manufactured: Responsibly sourced timber, made in the UK. The environmental credentials match the artisan values that independent cafes, farm shops and eco-conscious hospitality brands communicate to their customers.
- Displaysense, UK display specialists since 1978: Over 8,000 verified reviews. Free UK mainland delivery on qualifying orders.
Where the 210mm Block Anchors the Menu That Defines the Experience
| Restaurants, Gastropubs and Fine Dining | The master menu grip. Full A4 food menus, multi-page tasting menus on clipboards, wine lists and cocktail programmes held upright at each table. The solid base handles heavyweight card and rigid printed menus that would topple smaller holders. The satin black finish matches dark timber interiors, leather seating and candlelit dining rooms. |
| Pubs, Taprooms and Craft Beer Bars | The spill-proof drinks grip. Craft beer lists, rotating guest ale boards and food specials elevated safely above wet, sticky bar tops. The block lifts the printed card above the tabletop spill zone, keeping the menu pristine and legible while the condensation from the glasses stays beneath it. |
| Cafes, Coffee Shops and Bakeries | The artisan table talker. "Today's Menu," cake selection cards, loyalty programme notices and daily roast origins displayed at each table. The handcrafted wooden base signals the same artisan care that the venue puts into its food and coffee. The 148mm block is available for smaller A5 menus and tighter cafe tables. |
| Weddings, Banquets and Private Events | The elegant seating marker. A4 table plans, calligraphy seating cards, custom bar menus and personalised welcome messages held upright at each table. Ten blocks cover a full event layout. The minimalist black base complements every colour scheme and table setting without competing with the floral arrangements. |
| Boutique Retail, Farm Shops and Deli Counters | The curated product plaque. Large-format pricing cards, origin stories, tasting notes and provenance details positioned beside local produce, artisan gins, handmade cosmetics and speciality cheeses. The frameless display invites the customer to pick up and read the card rather than peer through plastic. |
| Hotels, Conference Venues and Corporate Events | Meeting room schedules, delegate name cards, sponsor displays and buffet labels held in a consistent, professional format across every table and surface. Ten blocks standardise the visual presentation of an entire event space from a single pack. |
Drop, Display, Swap, Repeat
- Place the block on any flat table, counter or shelf surface. The 40 x 40mm timber sits heavy and stable without fixings.
- Drop your A4 card, clipboard or rigid insert into the 3mm slot. It stands upright instantly.
- When the message changes, pull the card out and drop the replacement in. One second. Zero reprinting if you rotate the same cards between services.
Need a Smaller Block or a Chalkboard Version?
The 148mm block grips A5 portrait menus for standard cafe tables. The 105mm block holds A6 cards, DL drinks menus and wedding table numbers. The chalkboard menu holder adds a writable double-sided panel for daily handwritten specials.
Call us on 01279460460 or send us your requirements for volume pricing across multiple venues.
Displaysense CWB210BK Pack of 10 Black Wooden Menu Holder Blocks, 210mm width. 40 x 40mm solid European Redwood block with satin black stain. 3mm slot x 20mm deep across the full 210mm width. Accepts A4 portrait (210 x 297mm), A5 landscape (210 x 148mm), clipboards and rigid inserts up to 3mm thick. FSC-approved sustainable timber. UK manufactured. Pack of 10. Also available: 148mm (A5 portrait) and 105mm (A6/DL). Free UK mainland delivery on qualifying orders. Displaysense, UK display specialists since 1978. 8,000+ reviews.
The cloudy plastic menu holder is the most common aesthetic failure on a restaurant table. It arrived transparent. Within a few months of daily wiping, condensation contact and kitchen humidity, it has hazed, yellowed and developed a network of micro-scratches that make everything behind it look slightly neglected. The wooden block eliminates plastic entirely. There is no cover to cloud. No sleeve to scratch. No acrylic barrier to catch overhead spotlights and throw a white reflection across the menu. The card sits openly in the slot, held upright by solid timber, readable from any angle under any lighting condition. Wood does not yellow. It does not haze. It ages with the venue rather than against it.
The second advantage is elevation. Beautifully printed card menus placed flat on a bar counter absorb spilled drinks within minutes. Condensation from a cold glass seeps into the card stock. Coffee rings mark the cover. The printed text smudges. Within a single service, the menu that cost time and money to design is ruined. The wooden block lifts that card vertically out of the tabletop spill zone. The bottom edge sits in the 20mm-deep slot. The rest of the card stands clear of the surface. Spills happen beneath it, not on it. The menu stays dry, clean and presentable for as long as the card stock lasts.
The third problem is instability. Full A4 menus are tall, heavy and top-heavy. Place one in a holder designed for a smaller format and the centre of gravity sits above the base, making the entire assembly prone to tipping forward. The 210mm block is the solution. The full-width grip distributes the weight of the A4 card evenly across the base. The 40 x 40mm solid timber creates a dense, low centre of gravity that counterbalances even the heaviest clipboarded multi-page menu. On a busy table where guests reach across for condiments, on an alfresco terrace where the breeze catches the card, on a bar top where pint glasses get moved around it all evening, the block holds.
The satin black finish is a deliberate visual strategy. Raw, unpainted pine looks unfinished and stains permanently the moment liquid touches it. The satin black transforms the block into a stealthy, invisible base that recedes beneath the printed card. The customer's eye goes to the menu, the product description or the table number. The block provides the structural support without announcing its presence. In a candlelit dining room, on a dark timber bar top or against a slate countertop, the black finish integrates with the surface it sits on rather than contrasting against it.
What Ships in the CWB210BK Pack
- 10 x 210mm black wooden menu holder blocks
- Each block: 40 x 40mm solid European Redwood
- Satin black stain finish
- 3mm slot x 20mm deep, full 210mm width
- Accepts A4 portrait, A5 landscape, clipboards and rigid inserts up to 3mm
- FSC-approved sustainable timber
- UK manufactured
- Free UK mainland delivery on qualifying orders
Want a Writable Chalkboard Instead of a Card Holder?
The black wooden chalkboard menu holder adds a double-sided, slide-in chalkboard panel for venues that want handwritten daily specials without printing. Same black timber aesthetic. Same artisan presence. Writable and wipeable instead of printed.
Call us on 01279460460 or send us your requirements for volume pricing across your venues.
Displaysense CWB210BK. Eliminates plastic entirely: no covers to cloud, no sleeves to scratch, no glare. Elevates card above the tabletop spill zone. 210mm full-width grip counterbalances heavy A4 menus and clipboards. Satin black stealth base recedes beneath the card. Pack of 10. UK manufactured, FSC-approved. Displaysense, since 1978.
Full specifications for the CWB210BK 210mm black wooden menu holder block. Every component is chosen for maximum A4 stability, frameless tactile presentation and the kind of artisan material quality that premium hospitality, boutique retail and event venues demand from tabletop display.
| Specification | Detail | What This Means for You |
|---|---|---|
| Block Width | 210mm | The master menu grip. Matches the full width of an A4 portrait card and A5 landscape card. Maximum grip, zero wobble. |
| Block Dimensions | 40 x 40mm cross-section | Dense, solid timber that creates a low centre of gravity. Heavy enough to anchor tall A4 cards, clipboards and rigid inserts on busy tables and bar tops. |
| Slot | 3mm wide x 20mm deep, full width | Accepts card, chalkboard panels and rigid print up to 3mm thick. Drop-and-go loading in one second. No tight sleeves, no clips, no dog-eared corners. |
| Accepts | A4 portrait (210 x 297mm), A5 landscape (210 x 148mm), clipboards, rigid inserts | The largest format in the range. Handles full-size restaurant menus, multi-page clipboarded wine lists, large product pricing cards and event table plans. |
| Material | Solid European Redwood | Dense, durable hardwood that provides the weight and structural integrity that hollow or composite alternatives lack. Ages well with use. |
| Finish | Satin black stain | Stealth presentation. Hides fingerprints and coffee marks. Vanishes visually beneath the card. Complements dark-timber interiors, candlelit dining and industrial-chic decor. |
| Sustainability | FSC-approved, UK manufactured | Responsibly sourced timber. Made in the UK. Environmental credentials that match the values of eco-conscious hospitality and artisan retail brands. |
| Display Style | Frameless, open | No plastic cover, no acrylic sleeve, no overhead glare. The card sits openly, inviting touch. Customers feel the texture of premium cardstock directly. |
| Pack Quantity | 10 units | Instant venue-wide standardisation. Ten tables, ten bar positions or ten retail display points from a single delivery. |
| Suitable Environments | Indoor tabletop, counter and shelf | Restaurants, gastropubs, cafes, bars, farm shops, deli counters, boutique retail, weddings, conferences, hotels. |
| Also Available | 148mm (A5 portrait), 105mm (A6/DL) | 148mm for standard A5 cafe menus. 105mm for table numbers, DL drinks cards and small retail price tags. |
| Delivery | Free UK mainland on qualifying orders | Volume pricing for multi-venue hospitality groups and event hire companies. |
Free delivery on every order, no minimum spend
UK Mainland standard delivery included on everything we sell.
Standard
Free
Always included, no minimum order
Express
£9.95
Express options shown at checkout where available
Lead time
2 to 3 days
Working days, UK Mainland
Returns
28 days
Original condition and packaging
Good to know
- Orders before 4pm typically ship the same day
- Tracking email sent on dispatch
- Ground-floor, accessible delivery point
Returns must be unused and in original packaging. Full delivery information · Returns policy
210mm Black Wooden Menu Holder Block: Your Questions Answered
Q: What sizes of card or menu will this 210mm block hold?
A: A4 portrait (210mm wide), A5 landscape (210mm wide), clipboarded multi-page menus and rigid inserts up to 3mm thick. The 210mm width is the largest in the range, purpose-built for full-size restaurant menus, wine lists and large-format product cards.
Q: Why is there no plastic cover or sleeve?
A: Plastic covers scratch, cloud, yellow and catch overhead light in bright reflections. Removing the plastic entirely creates a frameless, glare-free display where the card is the only thing the customer sees. It also allows venues that print on premium textured cardstock to let customers feel the quality directly, which builds the tactile impression of care and authenticity.
Q: Will a tall A4 menu tip the block forward?
A: No. The 40 x 40mm solid timber cross-section provides a dense, low centre of gravity, and the 210mm width distributes the weight evenly across the full base edge of the card. The block counterbalances heavy A4 cards, multi-page clipboards and rigid inserts without tipping, even on busy tables where guests reach across it.
Q: How quickly can staff change the card?
A: One second. Pull the old card out of the 3mm slot and drop the new one in. No clips, no sleeves, no fixings, no dog-eared corners. The drop-and-go slot is designed for the speed that daily specials, rotating promotions and event-by-event table plans demand.
Q: Does the satin black hide marks and spills?
A: Yes. The satin black stain absorbs fingerprints, coffee splashes and general table contact without showing visible marks. Raw, untreated pine stains permanently the moment liquid touches it. The black finish keeps the block looking professional through months and years of daily hospitality use.
Q: Will this work on an alfresco dining table?
A: The solid timber weight anchors the card against light breezes and door draughts that would blow over thin plastic holders. In exposed outdoor conditions with sustained wind, pair the block with a heavier cardstock (300gsm or above) for additional resistance. Bring the blocks inside during heavy rain or overnight.
Q: Can I use a clipboard with this block?
A: Yes. The 3mm slot accepts the base edge of a standard clipboard. Multi-page menus, wine lists and tasting notes clipped to a board stand upright in the block, creating a premium, book-like presentation at each table setting.
Q: Is this suitable for wedding table numbers?
A: Beautifully suited. Calligraphy table numbers, personalised welcome messages, custom bar menus and seating cards stand in the black block at each place setting. The minimalist base complements every colour scheme. For smaller table number cards, the 105mm block provides an even more compact footprint.
Q: Can I use this for product display in a retail or farm shop?
A: Yes. Large-format pricing cards, origin stories, tasting notes and provenance details positioned beside produce, artisan spirits, handmade cosmetics and speciality foods. The frameless display invites customers to pick up and read the card, creating a tactile connection with the product story.
Q: Is the wood sustainably sourced?
A: Yes. European Redwood from FSC-approved sustainable forestry. UK manufactured. The environmental credentials match the artisan and eco-conscious values that independent hospitality and retail venues communicate to their customers.
Q: Is ten too many for a small venue?
A: Ten is the minimum for visual cohesion across a dining room. Mismatched holders undermine the interior. Identical blocks on every table create the standardised, professional aesthetic that premium venues depend on. Spare blocks cover bar positions, till points and reserve stock for events.
Q: Is there a smaller block for A5 or A6 cards?
A: Yes. The 148mm block grips A5 portrait menus for standard cafe tables. The 105mm block holds A6 postcards, DL drinks cards and wedding table numbers. Same FSC-approved timber, same satin black finish, same 3mm slot across all three sizes.
Q: Can I use both sides of the card in this holder?
A: Yes. Because the block holds the card in an open slot with no backing, both the front and back of the card are visible. Print double-sided and customers approaching from either direction see content. On centre-table positions, both faces work.
Q: How many come in a pack?
A: Ten. Immediate venue-wide deployment. Volume pricing is available for hospitality groups, wedding hire companies and multi-site retail chains.
Restaurant Marketing, Hospitality Display and Retail Presentation Guides
The menu holder on the table is the final piece of brand communication before the customer orders. How it presents the card, how it matches the interior and whether it elevates or undermines the dining experience all influence what happens next. These guides cover restaurant marketing, hospitality strategy, retail sales and customer experience for the environments where tabletop display has the most direct impact on revenue.
Overview
Pack of 10 Black Wooden Menu Holder Blocks (210mm) for A4 Menus, Clipboards and Hospitality Signage
A full A4 menu is a substantial piece of printed collateral. It carries the complete food offering, the wine list, the cocktail programme or the multi-page tasting menu. Drop that card into a holder designed for something smaller and it wobbles, leans and eventually tips the entire stand forward onto the table. The CWB210BK 210mm wooden menu holder block is the heavyweight base that A4 demands. At 210mm wide, the block matches the full width of an A4 portrait card, providing maximum grip across the entire bottom edge. The solid European Redwood construction creates a dense, low centre of gravity that keeps heavy multi-page menus, tall clipboards and rigid acrylic inserts standing planted and upright through the busiest service.
Supplied as a pack of 10 in satin black FSC-approved timber. Ten tables, ten counters or ten display positions standardised in a single delivery. The master menu grip for venues that take their printed collateral seriously.
What the Block Does That Plastic Holders Cannot
- 210mm width for full A4 portrait grip: This is the largest block in the range, purpose-built for A4 portrait menus (210mm wide) and A5 landscape cards (210mm wide). The full-width grip means the card sits centred with equal support across its entire base edge. No wobble. No lean. No tipping forward when a guest pulls the menu toward them to read the dessert page.
- Solid European Redwood as a low-gravity anchor: The 40 x 40mm timber block is dense and heavy for its size. That density creates a low centre of gravity that holds tall A4 cards, multi-page clipboarded menus and rigid acrylic inserts firmly upright. On an alfresco table where the wind catches the card, on a bar counter where a pint glass bumps the base, on a busy cafe table where children reach across, the block stays planted. The menu stays standing.
- 3mm deep-cut slot for frictionless one-second updates: The 3mm groove runs the full 210mm width and sits 20mm deep into the block. Drop the card in. It stands. Pull it out. Drop the replacement in. One second. No tight acrylic sleeves that crinkle the corners. No clips that leave marks. No dog-eared edges from forcing paper into an undersized pocket. The slot is a "drop and go" system built for the speed that daily specials, rotating promotions and event-by-event table plans demand.
- Satin black finish for stealth presentation: Unpainted pine looks unfinished and stains the moment coffee lands on it. The satin black finish hides fingerprints, coffee rings and table marks while vanishing visually beneath the card it holds. The customer sees the menu, the product card or the table number. The block disappears. That invisible support is the entire design intention.
- Frameless tactile experience: There is no plastic sleeve, no acrylic cover and no bulky frame between the customer and the card. The menu sits openly in the block, inviting touch. Venues that print on heavy, textured artisan cardstock, embossed letterpress or hand-finished stock want customers to feel the quality. This block allows that tactile interaction instead of sealing it behind a scratched plastic barrier.
- Pack of 10 for instant venue-wide standardisation: Mismatched holders across a dining room undermine the interior design. Ten identical blocks deployed across ten tables, ten bar positions or ten retail display points create the unified, cohesive visual standard that premium hospitality and boutique retail depend on. One delivery, one aesthetic, every surface consistent.
- FSC-approved sustainable European Redwood, UK manufactured: Responsibly sourced timber, made in the UK. The environmental credentials match the artisan values that independent cafes, farm shops and eco-conscious hospitality brands communicate to their customers.
- Displaysense, UK display specialists since 1978: Over 8,000 verified reviews. Free UK mainland delivery on qualifying orders.
Where the 210mm Block Anchors the Menu That Defines the Experience
| Restaurants, Gastropubs and Fine Dining | The master menu grip. Full A4 food menus, multi-page tasting menus on clipboards, wine lists and cocktail programmes held upright at each table. The solid base handles heavyweight card and rigid printed menus that would topple smaller holders. The satin black finish matches dark timber interiors, leather seating and candlelit dining rooms. |
| Pubs, Taprooms and Craft Beer Bars | The spill-proof drinks grip. Craft beer lists, rotating guest ale boards and food specials elevated safely above wet, sticky bar tops. The block lifts the printed card above the tabletop spill zone, keeping the menu pristine and legible while the condensation from the glasses stays beneath it. |
| Cafes, Coffee Shops and Bakeries | The artisan table talker. "Today's Menu," cake selection cards, loyalty programme notices and daily roast origins displayed at each table. The handcrafted wooden base signals the same artisan care that the venue puts into its food and coffee. The 148mm block is available for smaller A5 menus and tighter cafe tables. |
| Weddings, Banquets and Private Events | The elegant seating marker. A4 table plans, calligraphy seating cards, custom bar menus and personalised welcome messages held upright at each table. Ten blocks cover a full event layout. The minimalist black base complements every colour scheme and table setting without competing with the floral arrangements. |
| Boutique Retail, Farm Shops and Deli Counters | The curated product plaque. Large-format pricing cards, origin stories, tasting notes and provenance details positioned beside local produce, artisan gins, handmade cosmetics and speciality cheeses. The frameless display invites the customer to pick up and read the card rather than peer through plastic. |
| Hotels, Conference Venues and Corporate Events | Meeting room schedules, delegate name cards, sponsor displays and buffet labels held in a consistent, professional format across every table and surface. Ten blocks standardise the visual presentation of an entire event space from a single pack. |
Drop, Display, Swap, Repeat
- Place the block on any flat table, counter or shelf surface. The 40 x 40mm timber sits heavy and stable without fixings.
- Drop your A4 card, clipboard or rigid insert into the 3mm slot. It stands upright instantly.
- When the message changes, pull the card out and drop the replacement in. One second. Zero reprinting if you rotate the same cards between services.
Need a Smaller Block or a Chalkboard Version?
The 148mm block grips A5 portrait menus for standard cafe tables. The 105mm block holds A6 cards, DL drinks menus and wedding table numbers. The chalkboard menu holder adds a writable double-sided panel for daily handwritten specials.
Call us on 01279460460 or send us your requirements for volume pricing across multiple venues.
Displaysense CWB210BK Pack of 10 Black Wooden Menu Holder Blocks, 210mm width. 40 x 40mm solid European Redwood block with satin black stain. 3mm slot x 20mm deep across the full 210mm width. Accepts A4 portrait (210 x 297mm), A5 landscape (210 x 148mm), clipboards and rigid inserts up to 3mm thick. FSC-approved sustainable timber. UK manufactured. Pack of 10. Also available: 148mm (A5 portrait) and 105mm (A6/DL). Free UK mainland delivery on qualifying orders. Displaysense, UK display specialists since 1978. 8,000+ reviews.
Description
The cloudy plastic menu holder is the most common aesthetic failure on a restaurant table. It arrived transparent. Within a few months of daily wiping, condensation contact and kitchen humidity, it has hazed, yellowed and developed a network of micro-scratches that make everything behind it look slightly neglected. The wooden block eliminates plastic entirely. There is no cover to cloud. No sleeve to scratch. No acrylic barrier to catch overhead spotlights and throw a white reflection across the menu. The card sits openly in the slot, held upright by solid timber, readable from any angle under any lighting condition. Wood does not yellow. It does not haze. It ages with the venue rather than against it.
The second advantage is elevation. Beautifully printed card menus placed flat on a bar counter absorb spilled drinks within minutes. Condensation from a cold glass seeps into the card stock. Coffee rings mark the cover. The printed text smudges. Within a single service, the menu that cost time and money to design is ruined. The wooden block lifts that card vertically out of the tabletop spill zone. The bottom edge sits in the 20mm-deep slot. The rest of the card stands clear of the surface. Spills happen beneath it, not on it. The menu stays dry, clean and presentable for as long as the card stock lasts.
The third problem is instability. Full A4 menus are tall, heavy and top-heavy. Place one in a holder designed for a smaller format and the centre of gravity sits above the base, making the entire assembly prone to tipping forward. The 210mm block is the solution. The full-width grip distributes the weight of the A4 card evenly across the base. The 40 x 40mm solid timber creates a dense, low centre of gravity that counterbalances even the heaviest clipboarded multi-page menu. On a busy table where guests reach across for condiments, on an alfresco terrace where the breeze catches the card, on a bar top where pint glasses get moved around it all evening, the block holds.
The satin black finish is a deliberate visual strategy. Raw, unpainted pine looks unfinished and stains permanently the moment liquid touches it. The satin black transforms the block into a stealthy, invisible base that recedes beneath the printed card. The customer's eye goes to the menu, the product description or the table number. The block provides the structural support without announcing its presence. In a candlelit dining room, on a dark timber bar top or against a slate countertop, the black finish integrates with the surface it sits on rather than contrasting against it.
What Ships in the CWB210BK Pack
- 10 x 210mm black wooden menu holder blocks
- Each block: 40 x 40mm solid European Redwood
- Satin black stain finish
- 3mm slot x 20mm deep, full 210mm width
- Accepts A4 portrait, A5 landscape, clipboards and rigid inserts up to 3mm
- FSC-approved sustainable timber
- UK manufactured
- Free UK mainland delivery on qualifying orders
Want a Writable Chalkboard Instead of a Card Holder?
The black wooden chalkboard menu holder adds a double-sided, slide-in chalkboard panel for venues that want handwritten daily specials without printing. Same black timber aesthetic. Same artisan presence. Writable and wipeable instead of printed.
Call us on 01279460460 or send us your requirements for volume pricing across your venues.
Displaysense CWB210BK. Eliminates plastic entirely: no covers to cloud, no sleeves to scratch, no glare. Elevates card above the tabletop spill zone. 210mm full-width grip counterbalances heavy A4 menus and clipboards. Satin black stealth base recedes beneath the card. Pack of 10. UK manufactured, FSC-approved. Displaysense, since 1978.
Specifications
Full specifications for the CWB210BK 210mm black wooden menu holder block. Every component is chosen for maximum A4 stability, frameless tactile presentation and the kind of artisan material quality that premium hospitality, boutique retail and event venues demand from tabletop display.
| Specification | Detail | What This Means for You |
|---|---|---|
| Block Width | 210mm | The master menu grip. Matches the full width of an A4 portrait card and A5 landscape card. Maximum grip, zero wobble. |
| Block Dimensions | 40 x 40mm cross-section | Dense, solid timber that creates a low centre of gravity. Heavy enough to anchor tall A4 cards, clipboards and rigid inserts on busy tables and bar tops. |
| Slot | 3mm wide x 20mm deep, full width | Accepts card, chalkboard panels and rigid print up to 3mm thick. Drop-and-go loading in one second. No tight sleeves, no clips, no dog-eared corners. |
| Accepts | A4 portrait (210 x 297mm), A5 landscape (210 x 148mm), clipboards, rigid inserts | The largest format in the range. Handles full-size restaurant menus, multi-page clipboarded wine lists, large product pricing cards and event table plans. |
| Material | Solid European Redwood | Dense, durable hardwood that provides the weight and structural integrity that hollow or composite alternatives lack. Ages well with use. |
| Finish | Satin black stain | Stealth presentation. Hides fingerprints and coffee marks. Vanishes visually beneath the card. Complements dark-timber interiors, candlelit dining and industrial-chic decor. |
| Sustainability | FSC-approved, UK manufactured | Responsibly sourced timber. Made in the UK. Environmental credentials that match the values of eco-conscious hospitality and artisan retail brands. |
| Display Style | Frameless, open | No plastic cover, no acrylic sleeve, no overhead glare. The card sits openly, inviting touch. Customers feel the texture of premium cardstock directly. |
| Pack Quantity | 10 units | Instant venue-wide standardisation. Ten tables, ten bar positions or ten retail display points from a single delivery. |
| Suitable Environments | Indoor tabletop, counter and shelf | Restaurants, gastropubs, cafes, bars, farm shops, deli counters, boutique retail, weddings, conferences, hotels. |
| Also Available | 148mm (A5 portrait), 105mm (A6/DL) | 148mm for standard A5 cafe menus. 105mm for table numbers, DL drinks cards and small retail price tags. |
| Delivery | Free UK mainland on qualifying orders | Volume pricing for multi-venue hospitality groups and event hire companies. |
Delivery & Returns
Free delivery on every order, no minimum spend
UK Mainland standard delivery included on everything we sell.
Standard
Free
Always included, no minimum order
Express
£9.95
Express options shown at checkout where available
Lead time
2 to 3 days
Working days, UK Mainland
Returns
28 days
Original condition and packaging
Good to know
- Orders before 4pm typically ship the same day
- Tracking email sent on dispatch
- Ground-floor, accessible delivery point
Returns must be unused and in original packaging. Full delivery information · Returns policy
FAQs
210mm Black Wooden Menu Holder Block: Your Questions Answered
Q: What sizes of card or menu will this 210mm block hold?
A: A4 portrait (210mm wide), A5 landscape (210mm wide), clipboarded multi-page menus and rigid inserts up to 3mm thick. The 210mm width is the largest in the range, purpose-built for full-size restaurant menus, wine lists and large-format product cards.
Q: Why is there no plastic cover or sleeve?
A: Plastic covers scratch, cloud, yellow and catch overhead light in bright reflections. Removing the plastic entirely creates a frameless, glare-free display where the card is the only thing the customer sees. It also allows venues that print on premium textured cardstock to let customers feel the quality directly, which builds the tactile impression of care and authenticity.
Q: Will a tall A4 menu tip the block forward?
A: No. The 40 x 40mm solid timber cross-section provides a dense, low centre of gravity, and the 210mm width distributes the weight evenly across the full base edge of the card. The block counterbalances heavy A4 cards, multi-page clipboards and rigid inserts without tipping, even on busy tables where guests reach across it.
Q: How quickly can staff change the card?
A: One second. Pull the old card out of the 3mm slot and drop the new one in. No clips, no sleeves, no fixings, no dog-eared corners. The drop-and-go slot is designed for the speed that daily specials, rotating promotions and event-by-event table plans demand.
Q: Does the satin black hide marks and spills?
A: Yes. The satin black stain absorbs fingerprints, coffee splashes and general table contact without showing visible marks. Raw, untreated pine stains permanently the moment liquid touches it. The black finish keeps the block looking professional through months and years of daily hospitality use.
Q: Will this work on an alfresco dining table?
A: The solid timber weight anchors the card against light breezes and door draughts that would blow over thin plastic holders. In exposed outdoor conditions with sustained wind, pair the block with a heavier cardstock (300gsm or above) for additional resistance. Bring the blocks inside during heavy rain or overnight.
Q: Can I use a clipboard with this block?
A: Yes. The 3mm slot accepts the base edge of a standard clipboard. Multi-page menus, wine lists and tasting notes clipped to a board stand upright in the block, creating a premium, book-like presentation at each table setting.
Q: Is this suitable for wedding table numbers?
A: Beautifully suited. Calligraphy table numbers, personalised welcome messages, custom bar menus and seating cards stand in the black block at each place setting. The minimalist base complements every colour scheme. For smaller table number cards, the 105mm block provides an even more compact footprint.
Q: Can I use this for product display in a retail or farm shop?
A: Yes. Large-format pricing cards, origin stories, tasting notes and provenance details positioned beside produce, artisan spirits, handmade cosmetics and speciality foods. The frameless display invites customers to pick up and read the card, creating a tactile connection with the product story.
Q: Is the wood sustainably sourced?
A: Yes. European Redwood from FSC-approved sustainable forestry. UK manufactured. The environmental credentials match the artisan and eco-conscious values that independent hospitality and retail venues communicate to their customers.
Q: Is ten too many for a small venue?
A: Ten is the minimum for visual cohesion across a dining room. Mismatched holders undermine the interior. Identical blocks on every table create the standardised, professional aesthetic that premium venues depend on. Spare blocks cover bar positions, till points and reserve stock for events.
Q: Is there a smaller block for A5 or A6 cards?
A: Yes. The 148mm block grips A5 portrait menus for standard cafe tables. The 105mm block holds A6 postcards, DL drinks cards and wedding table numbers. Same FSC-approved timber, same satin black finish, same 3mm slot across all three sizes.
Q: Can I use both sides of the card in this holder?
A: Yes. Because the block holds the card in an open slot with no backing, both the front and back of the card are visible. Print double-sided and customers approaching from either direction see content. On centre-table positions, both faces work.
Q: How many come in a pack?
A: Ten. Immediate venue-wide deployment. Volume pricing is available for hospitality groups, wedding hire companies and multi-site retail chains.
Knowledge Hub
Restaurant Marketing, Hospitality Display and Retail Presentation Guides
The menu holder on the table is the final piece of brand communication before the customer orders. How it presents the card, how it matches the interior and whether it elevates or undermines the dining experience all influence what happens next. These guides cover restaurant marketing, hospitality strategy, retail sales and customer experience for the environments where tabletop display has the most direct impact on revenue.
Pack of 10 Black Wooden Menu Holder Block - 210mm
1+
£59.00
£49.17
(Inc VAT)
(Exc VAT)
Overview
Description
Specifications
Delivery & Returns
FAQs
Knowledge Hub
Pack of 10 Black Wooden Menu Holder Blocks (210mm) for A4 Menus, Clipboards and Hospitality Signage
A full A4 menu is a substantial piece of printed collateral. It carries the complete food offering, the wine list, the cocktail programme or the multi-page tasting menu. Drop that card into a holder designed for something smaller and it wobbles, leans and eventually tips the entire stand forward onto the table. The CWB210BK 210mm wooden menu holder block is the heavyweight base that A4 demands. At 210mm wide, the block matches the full width of an A4 portrait card, providing maximum grip across the entire bottom edge. The solid European Redwood construction creates a dense, low centre of gravity that keeps heavy multi-page menus, tall clipboards and rigid acrylic inserts standing planted and upright through the busiest service.
Supplied as a pack of 10 in satin black FSC-approved timber. Ten tables, ten counters or ten display positions standardised in a single delivery. The master menu grip for venues that take their printed collateral seriously.
What the Block Does That Plastic Holders Cannot
- 210mm width for full A4 portrait grip: This is the largest block in the range, purpose-built for A4 portrait menus (210mm wide) and A5 landscape cards (210mm wide). The full-width grip means the card sits centred with equal support across its entire base edge. No wobble. No lean. No tipping forward when a guest pulls the menu toward them to read the dessert page.
- Solid European Redwood as a low-gravity anchor: The 40 x 40mm timber block is dense and heavy for its size. That density creates a low centre of gravity that holds tall A4 cards, multi-page clipboarded menus and rigid acrylic inserts firmly upright. On an alfresco table where the wind catches the card, on a bar counter where a pint glass bumps the base, on a busy cafe table where children reach across, the block stays planted. The menu stays standing.
- 3mm deep-cut slot for frictionless one-second updates: The 3mm groove runs the full 210mm width and sits 20mm deep into the block. Drop the card in. It stands. Pull it out. Drop the replacement in. One second. No tight acrylic sleeves that crinkle the corners. No clips that leave marks. No dog-eared edges from forcing paper into an undersized pocket. The slot is a "drop and go" system built for the speed that daily specials, rotating promotions and event-by-event table plans demand.
- Satin black finish for stealth presentation: Unpainted pine looks unfinished and stains the moment coffee lands on it. The satin black finish hides fingerprints, coffee rings and table marks while vanishing visually beneath the card it holds. The customer sees the menu, the product card or the table number. The block disappears. That invisible support is the entire design intention.
- Frameless tactile experience: There is no plastic sleeve, no acrylic cover and no bulky frame between the customer and the card. The menu sits openly in the block, inviting touch. Venues that print on heavy, textured artisan cardstock, embossed letterpress or hand-finished stock want customers to feel the quality. This block allows that tactile interaction instead of sealing it behind a scratched plastic barrier.
- Pack of 10 for instant venue-wide standardisation: Mismatched holders across a dining room undermine the interior design. Ten identical blocks deployed across ten tables, ten bar positions or ten retail display points create the unified, cohesive visual standard that premium hospitality and boutique retail depend on. One delivery, one aesthetic, every surface consistent.
- FSC-approved sustainable European Redwood, UK manufactured: Responsibly sourced timber, made in the UK. The environmental credentials match the artisan values that independent cafes, farm shops and eco-conscious hospitality brands communicate to their customers.
- Displaysense, UK display specialists since 1978: Over 8,000 verified reviews. Free UK mainland delivery on qualifying orders.
Where the 210mm Block Anchors the Menu That Defines the Experience
| Restaurants, Gastropubs and Fine Dining | The master menu grip. Full A4 food menus, multi-page tasting menus on clipboards, wine lists and cocktail programmes held upright at each table. The solid base handles heavyweight card and rigid printed menus that would topple smaller holders. The satin black finish matches dark timber interiors, leather seating and candlelit dining rooms. |
| Pubs, Taprooms and Craft Beer Bars | The spill-proof drinks grip. Craft beer lists, rotating guest ale boards and food specials elevated safely above wet, sticky bar tops. The block lifts the printed card above the tabletop spill zone, keeping the menu pristine and legible while the condensation from the glasses stays beneath it. |
| Cafes, Coffee Shops and Bakeries | The artisan table talker. "Today's Menu," cake selection cards, loyalty programme notices and daily roast origins displayed at each table. The handcrafted wooden base signals the same artisan care that the venue puts into its food and coffee. The 148mm block is available for smaller A5 menus and tighter cafe tables. |
| Weddings, Banquets and Private Events | The elegant seating marker. A4 table plans, calligraphy seating cards, custom bar menus and personalised welcome messages held upright at each table. Ten blocks cover a full event layout. The minimalist black base complements every colour scheme and table setting without competing with the floral arrangements. |
| Boutique Retail, Farm Shops and Deli Counters | The curated product plaque. Large-format pricing cards, origin stories, tasting notes and provenance details positioned beside local produce, artisan gins, handmade cosmetics and speciality cheeses. The frameless display invites the customer to pick up and read the card rather than peer through plastic. |
| Hotels, Conference Venues and Corporate Events | Meeting room schedules, delegate name cards, sponsor displays and buffet labels held in a consistent, professional format across every table and surface. Ten blocks standardise the visual presentation of an entire event space from a single pack. |
Drop, Display, Swap, Repeat
- Place the block on any flat table, counter or shelf surface. The 40 x 40mm timber sits heavy and stable without fixings.
- Drop your A4 card, clipboard or rigid insert into the 3mm slot. It stands upright instantly.
- When the message changes, pull the card out and drop the replacement in. One second. Zero reprinting if you rotate the same cards between services.
Need a Smaller Block or a Chalkboard Version?
The 148mm block grips A5 portrait menus for standard cafe tables. The 105mm block holds A6 cards, DL drinks menus and wedding table numbers. The chalkboard menu holder adds a writable double-sided panel for daily handwritten specials.
Call us on 01279460460 or send us your requirements for volume pricing across multiple venues.
Displaysense CWB210BK Pack of 10 Black Wooden Menu Holder Blocks, 210mm width. 40 x 40mm solid European Redwood block with satin black stain. 3mm slot x 20mm deep across the full 210mm width. Accepts A4 portrait (210 x 297mm), A5 landscape (210 x 148mm), clipboards and rigid inserts up to 3mm thick. FSC-approved sustainable timber. UK manufactured. Pack of 10. Also available: 148mm (A5 portrait) and 105mm (A6/DL). Free UK mainland delivery on qualifying orders. Displaysense, UK display specialists since 1978. 8,000+ reviews.
The cloudy plastic menu holder is the most common aesthetic failure on a restaurant table. It arrived transparent. Within a few months of daily wiping, condensation contact and kitchen humidity, it has hazed, yellowed and developed a network of micro-scratches that make everything behind it look slightly neglected. The wooden block eliminates plastic entirely. There is no cover to cloud. No sleeve to scratch. No acrylic barrier to catch overhead spotlights and throw a white reflection across the menu. The card sits openly in the slot, held upright by solid timber, readable from any angle under any lighting condition. Wood does not yellow. It does not haze. It ages with the venue rather than against it.
The second advantage is elevation. Beautifully printed card menus placed flat on a bar counter absorb spilled drinks within minutes. Condensation from a cold glass seeps into the card stock. Coffee rings mark the cover. The printed text smudges. Within a single service, the menu that cost time and money to design is ruined. The wooden block lifts that card vertically out of the tabletop spill zone. The bottom edge sits in the 20mm-deep slot. The rest of the card stands clear of the surface. Spills happen beneath it, not on it. The menu stays dry, clean and presentable for as long as the card stock lasts.
The third problem is instability. Full A4 menus are tall, heavy and top-heavy. Place one in a holder designed for a smaller format and the centre of gravity sits above the base, making the entire assembly prone to tipping forward. The 210mm block is the solution. The full-width grip distributes the weight of the A4 card evenly across the base. The 40 x 40mm solid timber creates a dense, low centre of gravity that counterbalances even the heaviest clipboarded multi-page menu. On a busy table where guests reach across for condiments, on an alfresco terrace where the breeze catches the card, on a bar top where pint glasses get moved around it all evening, the block holds.
The satin black finish is a deliberate visual strategy. Raw, unpainted pine looks unfinished and stains permanently the moment liquid touches it. The satin black transforms the block into a stealthy, invisible base that recedes beneath the printed card. The customer's eye goes to the menu, the product description or the table number. The block provides the structural support without announcing its presence. In a candlelit dining room, on a dark timber bar top or against a slate countertop, the black finish integrates with the surface it sits on rather than contrasting against it.
What Ships in the CWB210BK Pack
- 10 x 210mm black wooden menu holder blocks
- Each block: 40 x 40mm solid European Redwood
- Satin black stain finish
- 3mm slot x 20mm deep, full 210mm width
- Accepts A4 portrait, A5 landscape, clipboards and rigid inserts up to 3mm
- FSC-approved sustainable timber
- UK manufactured
- Free UK mainland delivery on qualifying orders
Want a Writable Chalkboard Instead of a Card Holder?
The black wooden chalkboard menu holder adds a double-sided, slide-in chalkboard panel for venues that want handwritten daily specials without printing. Same black timber aesthetic. Same artisan presence. Writable and wipeable instead of printed.
Call us on 01279460460 or send us your requirements for volume pricing across your venues.
Displaysense CWB210BK. Eliminates plastic entirely: no covers to cloud, no sleeves to scratch, no glare. Elevates card above the tabletop spill zone. 210mm full-width grip counterbalances heavy A4 menus and clipboards. Satin black stealth base recedes beneath the card. Pack of 10. UK manufactured, FSC-approved. Displaysense, since 1978.
Full specifications for the CWB210BK 210mm black wooden menu holder block. Every component is chosen for maximum A4 stability, frameless tactile presentation and the kind of artisan material quality that premium hospitality, boutique retail and event venues demand from tabletop display.
| Specification | Detail | What This Means for You |
|---|---|---|
| Block Width | 210mm | The master menu grip. Matches the full width of an A4 portrait card and A5 landscape card. Maximum grip, zero wobble. |
| Block Dimensions | 40 x 40mm cross-section | Dense, solid timber that creates a low centre of gravity. Heavy enough to anchor tall A4 cards, clipboards and rigid inserts on busy tables and bar tops. |
| Slot | 3mm wide x 20mm deep, full width | Accepts card, chalkboard panels and rigid print up to 3mm thick. Drop-and-go loading in one second. No tight sleeves, no clips, no dog-eared corners. |
| Accepts | A4 portrait (210 x 297mm), A5 landscape (210 x 148mm), clipboards, rigid inserts | The largest format in the range. Handles full-size restaurant menus, multi-page clipboarded wine lists, large product pricing cards and event table plans. |
| Material | Solid European Redwood | Dense, durable hardwood that provides the weight and structural integrity that hollow or composite alternatives lack. Ages well with use. |
| Finish | Satin black stain | Stealth presentation. Hides fingerprints and coffee marks. Vanishes visually beneath the card. Complements dark-timber interiors, candlelit dining and industrial-chic decor. |
| Sustainability | FSC-approved, UK manufactured | Responsibly sourced timber. Made in the UK. Environmental credentials that match the values of eco-conscious hospitality and artisan retail brands. |
| Display Style | Frameless, open | No plastic cover, no acrylic sleeve, no overhead glare. The card sits openly, inviting touch. Customers feel the texture of premium cardstock directly. |
| Pack Quantity | 10 units | Instant venue-wide standardisation. Ten tables, ten bar positions or ten retail display points from a single delivery. |
| Suitable Environments | Indoor tabletop, counter and shelf | Restaurants, gastropubs, cafes, bars, farm shops, deli counters, boutique retail, weddings, conferences, hotels. |
| Also Available | 148mm (A5 portrait), 105mm (A6/DL) | 148mm for standard A5 cafe menus. 105mm for table numbers, DL drinks cards and small retail price tags. |
| Delivery | Free UK mainland on qualifying orders | Volume pricing for multi-venue hospitality groups and event hire companies. |
Free delivery on every order, no minimum spend
UK Mainland standard delivery included on everything we sell.
Standard
Free
Always included, no minimum order
Express
£9.95
Express options shown at checkout where available
Lead time
2 to 3 days
Working days, UK Mainland
Returns
28 days
Original condition and packaging
Good to know
- Orders before 4pm typically ship the same day
- Tracking email sent on dispatch
- Ground-floor, accessible delivery point
Returns must be unused and in original packaging. Full delivery information · Returns policy
210mm Black Wooden Menu Holder Block: Your Questions Answered
Q: What sizes of card or menu will this 210mm block hold?
A: A4 portrait (210mm wide), A5 landscape (210mm wide), clipboarded multi-page menus and rigid inserts up to 3mm thick. The 210mm width is the largest in the range, purpose-built for full-size restaurant menus, wine lists and large-format product cards.
Q: Why is there no plastic cover or sleeve?
A: Plastic covers scratch, cloud, yellow and catch overhead light in bright reflections. Removing the plastic entirely creates a frameless, glare-free display where the card is the only thing the customer sees. It also allows venues that print on premium textured cardstock to let customers feel the quality directly, which builds the tactile impression of care and authenticity.
Q: Will a tall A4 menu tip the block forward?
A: No. The 40 x 40mm solid timber cross-section provides a dense, low centre of gravity, and the 210mm width distributes the weight evenly across the full base edge of the card. The block counterbalances heavy A4 cards, multi-page clipboards and rigid inserts without tipping, even on busy tables where guests reach across it.
Q: How quickly can staff change the card?
A: One second. Pull the old card out of the 3mm slot and drop the new one in. No clips, no sleeves, no fixings, no dog-eared corners. The drop-and-go slot is designed for the speed that daily specials, rotating promotions and event-by-event table plans demand.
Q: Does the satin black hide marks and spills?
A: Yes. The satin black stain absorbs fingerprints, coffee splashes and general table contact without showing visible marks. Raw, untreated pine stains permanently the moment liquid touches it. The black finish keeps the block looking professional through months and years of daily hospitality use.
Q: Will this work on an alfresco dining table?
A: The solid timber weight anchors the card against light breezes and door draughts that would blow over thin plastic holders. In exposed outdoor conditions with sustained wind, pair the block with a heavier cardstock (300gsm or above) for additional resistance. Bring the blocks inside during heavy rain or overnight.
Q: Can I use a clipboard with this block?
A: Yes. The 3mm slot accepts the base edge of a standard clipboard. Multi-page menus, wine lists and tasting notes clipped to a board stand upright in the block, creating a premium, book-like presentation at each table setting.
Q: Is this suitable for wedding table numbers?
A: Beautifully suited. Calligraphy table numbers, personalised welcome messages, custom bar menus and seating cards stand in the black block at each place setting. The minimalist base complements every colour scheme. For smaller table number cards, the 105mm block provides an even more compact footprint.
Q: Can I use this for product display in a retail or farm shop?
A: Yes. Large-format pricing cards, origin stories, tasting notes and provenance details positioned beside produce, artisan spirits, handmade cosmetics and speciality foods. The frameless display invites customers to pick up and read the card, creating a tactile connection with the product story.
Q: Is the wood sustainably sourced?
A: Yes. European Redwood from FSC-approved sustainable forestry. UK manufactured. The environmental credentials match the artisan and eco-conscious values that independent hospitality and retail venues communicate to their customers.
Q: Is ten too many for a small venue?
A: Ten is the minimum for visual cohesion across a dining room. Mismatched holders undermine the interior. Identical blocks on every table create the standardised, professional aesthetic that premium venues depend on. Spare blocks cover bar positions, till points and reserve stock for events.
Q: Is there a smaller block for A5 or A6 cards?
A: Yes. The 148mm block grips A5 portrait menus for standard cafe tables. The 105mm block holds A6 postcards, DL drinks cards and wedding table numbers. Same FSC-approved timber, same satin black finish, same 3mm slot across all three sizes.
Q: Can I use both sides of the card in this holder?
A: Yes. Because the block holds the card in an open slot with no backing, both the front and back of the card are visible. Print double-sided and customers approaching from either direction see content. On centre-table positions, both faces work.
Q: How many come in a pack?
A: Ten. Immediate venue-wide deployment. Volume pricing is available for hospitality groups, wedding hire companies and multi-site retail chains.
Restaurant Marketing, Hospitality Display and Retail Presentation Guides
The menu holder on the table is the final piece of brand communication before the customer orders. How it presents the card, how it matches the interior and whether it elevates or undermines the dining experience all influence what happens next. These guides cover restaurant marketing, hospitality strategy, retail sales and customer experience for the environments where tabletop display has the most direct impact on revenue.
Overview
Pack of 10 Black Wooden Menu Holder Blocks (210mm) for A4 Menus, Clipboards and Hospitality Signage
A full A4 menu is a substantial piece of printed collateral. It carries the complete food offering, the wine list, the cocktail programme or the multi-page tasting menu. Drop that card into a holder designed for something smaller and it wobbles, leans and eventually tips the entire stand forward onto the table. The CWB210BK 210mm wooden menu holder block is the heavyweight base that A4 demands. At 210mm wide, the block matches the full width of an A4 portrait card, providing maximum grip across the entire bottom edge. The solid European Redwood construction creates a dense, low centre of gravity that keeps heavy multi-page menus, tall clipboards and rigid acrylic inserts standing planted and upright through the busiest service.
Supplied as a pack of 10 in satin black FSC-approved timber. Ten tables, ten counters or ten display positions standardised in a single delivery. The master menu grip for venues that take their printed collateral seriously.
What the Block Does That Plastic Holders Cannot
- 210mm width for full A4 portrait grip: This is the largest block in the range, purpose-built for A4 portrait menus (210mm wide) and A5 landscape cards (210mm wide). The full-width grip means the card sits centred with equal support across its entire base edge. No wobble. No lean. No tipping forward when a guest pulls the menu toward them to read the dessert page.
- Solid European Redwood as a low-gravity anchor: The 40 x 40mm timber block is dense and heavy for its size. That density creates a low centre of gravity that holds tall A4 cards, multi-page clipboarded menus and rigid acrylic inserts firmly upright. On an alfresco table where the wind catches the card, on a bar counter where a pint glass bumps the base, on a busy cafe table where children reach across, the block stays planted. The menu stays standing.
- 3mm deep-cut slot for frictionless one-second updates: The 3mm groove runs the full 210mm width and sits 20mm deep into the block. Drop the card in. It stands. Pull it out. Drop the replacement in. One second. No tight acrylic sleeves that crinkle the corners. No clips that leave marks. No dog-eared edges from forcing paper into an undersized pocket. The slot is a "drop and go" system built for the speed that daily specials, rotating promotions and event-by-event table plans demand.
- Satin black finish for stealth presentation: Unpainted pine looks unfinished and stains the moment coffee lands on it. The satin black finish hides fingerprints, coffee rings and table marks while vanishing visually beneath the card it holds. The customer sees the menu, the product card or the table number. The block disappears. That invisible support is the entire design intention.
- Frameless tactile experience: There is no plastic sleeve, no acrylic cover and no bulky frame between the customer and the card. The menu sits openly in the block, inviting touch. Venues that print on heavy, textured artisan cardstock, embossed letterpress or hand-finished stock want customers to feel the quality. This block allows that tactile interaction instead of sealing it behind a scratched plastic barrier.
- Pack of 10 for instant venue-wide standardisation: Mismatched holders across a dining room undermine the interior design. Ten identical blocks deployed across ten tables, ten bar positions or ten retail display points create the unified, cohesive visual standard that premium hospitality and boutique retail depend on. One delivery, one aesthetic, every surface consistent.
- FSC-approved sustainable European Redwood, UK manufactured: Responsibly sourced timber, made in the UK. The environmental credentials match the artisan values that independent cafes, farm shops and eco-conscious hospitality brands communicate to their customers.
- Displaysense, UK display specialists since 1978: Over 8,000 verified reviews. Free UK mainland delivery on qualifying orders.
Where the 210mm Block Anchors the Menu That Defines the Experience
| Restaurants, Gastropubs and Fine Dining | The master menu grip. Full A4 food menus, multi-page tasting menus on clipboards, wine lists and cocktail programmes held upright at each table. The solid base handles heavyweight card and rigid printed menus that would topple smaller holders. The satin black finish matches dark timber interiors, leather seating and candlelit dining rooms. |
| Pubs, Taprooms and Craft Beer Bars | The spill-proof drinks grip. Craft beer lists, rotating guest ale boards and food specials elevated safely above wet, sticky bar tops. The block lifts the printed card above the tabletop spill zone, keeping the menu pristine and legible while the condensation from the glasses stays beneath it. |
| Cafes, Coffee Shops and Bakeries | The artisan table talker. "Today's Menu," cake selection cards, loyalty programme notices and daily roast origins displayed at each table. The handcrafted wooden base signals the same artisan care that the venue puts into its food and coffee. The 148mm block is available for smaller A5 menus and tighter cafe tables. |
| Weddings, Banquets and Private Events | The elegant seating marker. A4 table plans, calligraphy seating cards, custom bar menus and personalised welcome messages held upright at each table. Ten blocks cover a full event layout. The minimalist black base complements every colour scheme and table setting without competing with the floral arrangements. |
| Boutique Retail, Farm Shops and Deli Counters | The curated product plaque. Large-format pricing cards, origin stories, tasting notes and provenance details positioned beside local produce, artisan gins, handmade cosmetics and speciality cheeses. The frameless display invites the customer to pick up and read the card rather than peer through plastic. |
| Hotels, Conference Venues and Corporate Events | Meeting room schedules, delegate name cards, sponsor displays and buffet labels held in a consistent, professional format across every table and surface. Ten blocks standardise the visual presentation of an entire event space from a single pack. |
Drop, Display, Swap, Repeat
- Place the block on any flat table, counter or shelf surface. The 40 x 40mm timber sits heavy and stable without fixings.
- Drop your A4 card, clipboard or rigid insert into the 3mm slot. It stands upright instantly.
- When the message changes, pull the card out and drop the replacement in. One second. Zero reprinting if you rotate the same cards between services.
Need a Smaller Block or a Chalkboard Version?
The 148mm block grips A5 portrait menus for standard cafe tables. The 105mm block holds A6 cards, DL drinks menus and wedding table numbers. The chalkboard menu holder adds a writable double-sided panel for daily handwritten specials.
Call us on 01279460460 or send us your requirements for volume pricing across multiple venues.
Displaysense CWB210BK Pack of 10 Black Wooden Menu Holder Blocks, 210mm width. 40 x 40mm solid European Redwood block with satin black stain. 3mm slot x 20mm deep across the full 210mm width. Accepts A4 portrait (210 x 297mm), A5 landscape (210 x 148mm), clipboards and rigid inserts up to 3mm thick. FSC-approved sustainable timber. UK manufactured. Pack of 10. Also available: 148mm (A5 portrait) and 105mm (A6/DL). Free UK mainland delivery on qualifying orders. Displaysense, UK display specialists since 1978. 8,000+ reviews.
Description
The cloudy plastic menu holder is the most common aesthetic failure on a restaurant table. It arrived transparent. Within a few months of daily wiping, condensation contact and kitchen humidity, it has hazed, yellowed and developed a network of micro-scratches that make everything behind it look slightly neglected. The wooden block eliminates plastic entirely. There is no cover to cloud. No sleeve to scratch. No acrylic barrier to catch overhead spotlights and throw a white reflection across the menu. The card sits openly in the slot, held upright by solid timber, readable from any angle under any lighting condition. Wood does not yellow. It does not haze. It ages with the venue rather than against it.
The second advantage is elevation. Beautifully printed card menus placed flat on a bar counter absorb spilled drinks within minutes. Condensation from a cold glass seeps into the card stock. Coffee rings mark the cover. The printed text smudges. Within a single service, the menu that cost time and money to design is ruined. The wooden block lifts that card vertically out of the tabletop spill zone. The bottom edge sits in the 20mm-deep slot. The rest of the card stands clear of the surface. Spills happen beneath it, not on it. The menu stays dry, clean and presentable for as long as the card stock lasts.
The third problem is instability. Full A4 menus are tall, heavy and top-heavy. Place one in a holder designed for a smaller format and the centre of gravity sits above the base, making the entire assembly prone to tipping forward. The 210mm block is the solution. The full-width grip distributes the weight of the A4 card evenly across the base. The 40 x 40mm solid timber creates a dense, low centre of gravity that counterbalances even the heaviest clipboarded multi-page menu. On a busy table where guests reach across for condiments, on an alfresco terrace where the breeze catches the card, on a bar top where pint glasses get moved around it all evening, the block holds.
The satin black finish is a deliberate visual strategy. Raw, unpainted pine looks unfinished and stains permanently the moment liquid touches it. The satin black transforms the block into a stealthy, invisible base that recedes beneath the printed card. The customer's eye goes to the menu, the product description or the table number. The block provides the structural support without announcing its presence. In a candlelit dining room, on a dark timber bar top or against a slate countertop, the black finish integrates with the surface it sits on rather than contrasting against it.
What Ships in the CWB210BK Pack
- 10 x 210mm black wooden menu holder blocks
- Each block: 40 x 40mm solid European Redwood
- Satin black stain finish
- 3mm slot x 20mm deep, full 210mm width
- Accepts A4 portrait, A5 landscape, clipboards and rigid inserts up to 3mm
- FSC-approved sustainable timber
- UK manufactured
- Free UK mainland delivery on qualifying orders
Want a Writable Chalkboard Instead of a Card Holder?
The black wooden chalkboard menu holder adds a double-sided, slide-in chalkboard panel for venues that want handwritten daily specials without printing. Same black timber aesthetic. Same artisan presence. Writable and wipeable instead of printed.
Call us on 01279460460 or send us your requirements for volume pricing across your venues.
Displaysense CWB210BK. Eliminates plastic entirely: no covers to cloud, no sleeves to scratch, no glare. Elevates card above the tabletop spill zone. 210mm full-width grip counterbalances heavy A4 menus and clipboards. Satin black stealth base recedes beneath the card. Pack of 10. UK manufactured, FSC-approved. Displaysense, since 1978.
Specifications
Full specifications for the CWB210BK 210mm black wooden menu holder block. Every component is chosen for maximum A4 stability, frameless tactile presentation and the kind of artisan material quality that premium hospitality, boutique retail and event venues demand from tabletop display.
| Specification | Detail | What This Means for You |
|---|---|---|
| Block Width | 210mm | The master menu grip. Matches the full width of an A4 portrait card and A5 landscape card. Maximum grip, zero wobble. |
| Block Dimensions | 40 x 40mm cross-section | Dense, solid timber that creates a low centre of gravity. Heavy enough to anchor tall A4 cards, clipboards and rigid inserts on busy tables and bar tops. |
| Slot | 3mm wide x 20mm deep, full width | Accepts card, chalkboard panels and rigid print up to 3mm thick. Drop-and-go loading in one second. No tight sleeves, no clips, no dog-eared corners. |
| Accepts | A4 portrait (210 x 297mm), A5 landscape (210 x 148mm), clipboards, rigid inserts | The largest format in the range. Handles full-size restaurant menus, multi-page clipboarded wine lists, large product pricing cards and event table plans. |
| Material | Solid European Redwood | Dense, durable hardwood that provides the weight and structural integrity that hollow or composite alternatives lack. Ages well with use. |
| Finish | Satin black stain | Stealth presentation. Hides fingerprints and coffee marks. Vanishes visually beneath the card. Complements dark-timber interiors, candlelit dining and industrial-chic decor. |
| Sustainability | FSC-approved, UK manufactured | Responsibly sourced timber. Made in the UK. Environmental credentials that match the values of eco-conscious hospitality and artisan retail brands. |
| Display Style | Frameless, open | No plastic cover, no acrylic sleeve, no overhead glare. The card sits openly, inviting touch. Customers feel the texture of premium cardstock directly. |
| Pack Quantity | 10 units | Instant venue-wide standardisation. Ten tables, ten bar positions or ten retail display points from a single delivery. |
| Suitable Environments | Indoor tabletop, counter and shelf | Restaurants, gastropubs, cafes, bars, farm shops, deli counters, boutique retail, weddings, conferences, hotels. |
| Also Available | 148mm (A5 portrait), 105mm (A6/DL) | 148mm for standard A5 cafe menus. 105mm for table numbers, DL drinks cards and small retail price tags. |
| Delivery | Free UK mainland on qualifying orders | Volume pricing for multi-venue hospitality groups and event hire companies. |
Delivery & Returns
Free delivery on every order, no minimum spend
UK Mainland standard delivery included on everything we sell.
Standard
Free
Always included, no minimum order
Express
£9.95
Express options shown at checkout where available
Lead time
2 to 3 days
Working days, UK Mainland
Returns
28 days
Original condition and packaging
Good to know
- Orders before 4pm typically ship the same day
- Tracking email sent on dispatch
- Ground-floor, accessible delivery point
Returns must be unused and in original packaging. Full delivery information · Returns policy
FAQs
210mm Black Wooden Menu Holder Block: Your Questions Answered
Q: What sizes of card or menu will this 210mm block hold?
A: A4 portrait (210mm wide), A5 landscape (210mm wide), clipboarded multi-page menus and rigid inserts up to 3mm thick. The 210mm width is the largest in the range, purpose-built for full-size restaurant menus, wine lists and large-format product cards.
Q: Why is there no plastic cover or sleeve?
A: Plastic covers scratch, cloud, yellow and catch overhead light in bright reflections. Removing the plastic entirely creates a frameless, glare-free display where the card is the only thing the customer sees. It also allows venues that print on premium textured cardstock to let customers feel the quality directly, which builds the tactile impression of care and authenticity.
Q: Will a tall A4 menu tip the block forward?
A: No. The 40 x 40mm solid timber cross-section provides a dense, low centre of gravity, and the 210mm width distributes the weight evenly across the full base edge of the card. The block counterbalances heavy A4 cards, multi-page clipboards and rigid inserts without tipping, even on busy tables where guests reach across it.
Q: How quickly can staff change the card?
A: One second. Pull the old card out of the 3mm slot and drop the new one in. No clips, no sleeves, no fixings, no dog-eared corners. The drop-and-go slot is designed for the speed that daily specials, rotating promotions and event-by-event table plans demand.
Q: Does the satin black hide marks and spills?
A: Yes. The satin black stain absorbs fingerprints, coffee splashes and general table contact without showing visible marks. Raw, untreated pine stains permanently the moment liquid touches it. The black finish keeps the block looking professional through months and years of daily hospitality use.
Q: Will this work on an alfresco dining table?
A: The solid timber weight anchors the card against light breezes and door draughts that would blow over thin plastic holders. In exposed outdoor conditions with sustained wind, pair the block with a heavier cardstock (300gsm or above) for additional resistance. Bring the blocks inside during heavy rain or overnight.
Q: Can I use a clipboard with this block?
A: Yes. The 3mm slot accepts the base edge of a standard clipboard. Multi-page menus, wine lists and tasting notes clipped to a board stand upright in the block, creating a premium, book-like presentation at each table setting.
Q: Is this suitable for wedding table numbers?
A: Beautifully suited. Calligraphy table numbers, personalised welcome messages, custom bar menus and seating cards stand in the black block at each place setting. The minimalist base complements every colour scheme. For smaller table number cards, the 105mm block provides an even more compact footprint.
Q: Can I use this for product display in a retail or farm shop?
A: Yes. Large-format pricing cards, origin stories, tasting notes and provenance details positioned beside produce, artisan spirits, handmade cosmetics and speciality foods. The frameless display invites customers to pick up and read the card, creating a tactile connection with the product story.
Q: Is the wood sustainably sourced?
A: Yes. European Redwood from FSC-approved sustainable forestry. UK manufactured. The environmental credentials match the artisan and eco-conscious values that independent hospitality and retail venues communicate to their customers.
Q: Is ten too many for a small venue?
A: Ten is the minimum for visual cohesion across a dining room. Mismatched holders undermine the interior. Identical blocks on every table create the standardised, professional aesthetic that premium venues depend on. Spare blocks cover bar positions, till points and reserve stock for events.
Q: Is there a smaller block for A5 or A6 cards?
A: Yes. The 148mm block grips A5 portrait menus for standard cafe tables. The 105mm block holds A6 postcards, DL drinks cards and wedding table numbers. Same FSC-approved timber, same satin black finish, same 3mm slot across all three sizes.
Q: Can I use both sides of the card in this holder?
A: Yes. Because the block holds the card in an open slot with no backing, both the front and back of the card are visible. Print double-sided and customers approaching from either direction see content. On centre-table positions, both faces work.
Q: How many come in a pack?
A: Ten. Immediate venue-wide deployment. Volume pricing is available for hospitality groups, wedding hire companies and multi-site retail chains.
Knowledge Hub
Restaurant Marketing, Hospitality Display and Retail Presentation Guides
The menu holder on the table is the final piece of brand communication before the customer orders. How it presents the card, how it matches the interior and whether it elevates or undermines the dining experience all influence what happens next. These guides cover restaurant marketing, hospitality strategy, retail sales and customer experience for the environments where tabletop display has the most direct impact on revenue.
