Overview
Description
Specifications
Delivery & Returns
FAQs
Knowledge Hub
Pin Freely and Lock Every Note Away on a Natural Cork Board
A natural cork face lets a push pin go in anywhere and grip, so a long wall becomes one open surface for rotas, plans and printed notes, and behind a pair of lockable doors every pinned sheet stays exactly where it was put. The warm cork tone sits quietly behind whatever is posted, and the surface closes around each pin hole so it can be re-pinned time and again, which suits a corridor, an office or a workroom where a lot of information changes often and needs to stay in order. Set to hang landscape across a broad space, it makes a plain wall into one working pin board a whole team can post to and read at a glance, rather than hunting across several smaller boards. It works best in schools, offices and community venues where notes are pinned, moved and updated daily, and where a full wall of them should stay in order and protected from tampering behind a lock.
Why High-Footfall Spaces Rely on a Large Lockable Pin Board
- A warm natural cork face: Cork gives a long board a soft, earthy look that suits a working wall, and its springy face takes a push pin cleanly wherever a note goes. The natural tone sits quietly behind printed sheets and handwritten cards without drawing the eye from what is pinned up.
- Made for push pins across the width: A push pin presses into the cork and holds a sheet firm, then pulls out clean as the cork closes over the small hole behind. That lets a wide board be re-pinned again and again, so a rota or plan can change through the week and the face stays even.
- A satin anodised aluminium frame: Aluminium runs the length of the board in a low-glare satin finish that shrugs off scuffs and wipes clean fast, keeping a large panel sharp on a busy route. Concealed fixings sit out of sight along the frame for a clean edge.
- Built to hang the wide way: Fixed the horizontal way with the kit provided, the board reaches across a broad wall that a smaller square would leave part bare. That width gives a corridor or workroom one large pinning surface in place of several small ones.
- Doors that lock over the cork: A pair of clear doors shuts across the whole cork surface and locks on a key, putting every pinned note out of reach so nothing can be moved or lifted as people pass. A keyholder opens it to re-pin, which keeps a big shared board reliable.
- Covered by a two-year warranty: The frame, doors and lock are guaranteed for two years, so a pin board earning hard days in a school or office is protected against the wear of heavy daily use. Free UK mainland delivery and a 28-day return policy back every order placed.
Where a Cork Pin Board Suits a Busy Working Wall
| Schools and Staffrooms | Corridor and staffroom walls pin timetables, cover rotas and project work to a natural cork face that takes a fresh pin all day, the locked doors keeping a large school display safe from stray hands between one lesson and the next. |
| Offices and Workrooms | Team walls hold plans, schedules and reference sheets on cork, a surface built for constant re-pinning as a project moves, the wide board carrying a whole department worth of working notes where staff pass through and update them. |
| Community and Leisure Venues | Foyer and hall walls post class times, notices and local flyers on a warm cork surface that feels welcoming to visitors, the broad panel holding a full spread of pinned information behind glazing between one booking and the next. |
| Studios and Workshops | Studio and workshop walls pin sketches, plans and safety notices to cork, a forgiving surface that shrugs off endless pin holes, the large face giving room to lay out a whole project where people work close together and swap sheets often through the day. |
| Universities and Campuses | Common-room and corridor walls run society notices, module information and event flyers on a cork board, a classic pinning surface for a student space, the doors keeping a wide, busy display secure and in order through heavy term-time footfall. |
| Reception and Waiting Areas | Reception and waiting walls show welcome notes, guidance and pinned updates on a calm cork face, easy on the eye for anyone waiting a while, the long board taking a broad run of paper where footfall stays steady through the day. |
Need a Smaller Square Cork Board?
For a tighter wall, the same lockable design is made as the square Tamperproof Cork Aluminium Frame Noticeboard 1200mm x 1200mm. Order with free UK mainland delivery.
Call us on 01279460460 or send us your requirements and we will get back to you.
NB7918C is a Tamperproof Cork Aluminium Noticeboard from Displaysense. An extra-large landscape pin board with two shatterproof PETG doors that guard pinned notices from tampering, a natural cork surface for push pins, and a satin anodised aluminium frame with concealed fixings. Dimensions 1800mm x 1200mm. Weight 20kg. Two lockable shatterproof PETG doors, natural cork surface for push pins, satin anodised aluminium frame with concealed fixings, 20mm internal clearance for layered displays, landscape wall mounting, wall mount kit included, two-year warranty. Used by schools, offices, community venues, staffrooms and studios for rotas, plans, project notes and pinned information behind lockable doors. Also available as a smaller square version and in grey or green felt surfaces at this size. Displaysense, UK display specialist since 1978. Free UK delivery.
Natural cork gives an extra-wide board a warm, tactile face that a push pin sinks into cleanly and grips, holding a sheet flat with no tape, no staples and no marks left behind. The colour is a soft, earthy brown that sits back and lets printed pages and handwritten cards stand out on their own. Across a board this broad the cork offers one continuous surface, so a whole wall of rotas, plans and reminders can be laid out and read together in a single sweep, rather than split between several smaller boards.
Pressing a pin into cork is quick, and the real advantage shows when it comes out again, because the surface closes around the small hole and levels itself for the next pin. That means a wide board can be re-pinned day after day as a project shifts or a rota changes, without the felt-style wear or the visible marks a staple would leave. A cork face rewards a space where notes move around often rather than staying fixed for months, and over years of daily pinning it keeps a smooth, unbroken look that a heavily stapled surface would lose.
Two shatterproof PETG doors lock across the whole span of the board, so every pinned note sits sealed behind clear plastic and cannot be lifted, moved or defaced as people pass. A knock makes PETG flex rather than break, so it holds in one piece where glass would go to sharp shards, which counts on a big panel that people pass at eye level in a public room. There is useful depth behind the doors as well, enough for pinned sheets to overlap and a thicker document to lie flat rather than press against the plastic, so even a crowded cork face still closes cleanly on its hinges.
Framing the whole board is satin anodised aluminium, a low-glare surround that wipes clean and holds the wide cork panel flat and square against the wall. Concealed fixings draw it tight with nothing on show, and because a board this size carries real weight, two people make the steadiest job of lifting and levelling it before the fixings go in. A two-year warranty stands behind the frame, doors and lock through the daily wear a busy school or office brings, and free UK mainland delivery with a 28-day return sits behind the order itself.
What Ships with This Noticeboard
- 1 x tamperproof cork pin board with two lockable shatterproof PETG doors
- 1 x set of keys for the door locks
- 1 x wall mount kit with concealed fixings
Don't Need the Locking Doors?
For an open cork board of the same width without the doors and lock, the Cork Noticeboard with Aluminium Frame 1800mm x 1200mm is available, for less.
Call us on 01279460460 or send us your requirements and we will get back to you.
NB7918C is a Tamperproof Cork Aluminium Noticeboard from Displaysense. An extra-large landscape pin board with two shatterproof PETG doors that guard pinned notices from tampering, a natural cork surface for push pins, and a satin anodised aluminium frame with concealed fixings. Dimensions 1800mm x 1200mm. Weight 20kg. Two lockable shatterproof PETG doors, natural cork surface for push pins, satin anodised aluminium frame with concealed fixings, 20mm internal clearance for layered displays, landscape wall mounting, wall mount kit included, two-year warranty. Used by schools, offices, community venues, staffrooms and studios for rotas, plans, project notes and pinned information behind lockable doors. Also available as a smaller square version and in grey or green felt surfaces at this size. Displaysense, UK display specialist since 1978. Free UK delivery.
This table sets out every specification for the NB7918C, a large landscape cork board of 1800mm x 1200mm behind two lockable PETG doors in a satin anodised aluminium frame. Each row pairs the figure with what it means for a wide pinning surface that has to stay both usable through the day and locked away when it counts.
| Specification | Detail | What This Means for You |
|---|---|---|
| Type | Tamperproof lockable pin board | A large natural cork board held behind twin lockable doors, so a wide surface of pinned notes stays neat, on show and safe from tampering. |
| Colour / Finish | Natural cork | A warm, earthy cork tone that suits a working wall and sits quietly behind printed sheets and handwritten cards without competing with them. |
| Board Size | 1800mm x 1200mm | A broad landscape face gives room to pin a whole department worth of rotas and notes at once along a corridor, office or workroom wall, far more than a compact square board would take. |
| Surface | Cork, push pins | Cork takes a push pin anywhere and closes around the hole as it comes out, so the board can be re-pinned again and again without staples and without the surface filling with old marks. |
| Weight | 20kg | At 20kg this is a two-person board to hang, one steadying each end while it is squared up and the hidden fixings are driven along the wall. |
| Doors | Two lockable shatterproof PETG | Two clear PETG doors lock across the cork and stay see-through, holding a pinned display on view while shutting out tampering and the knocks that split glass, then opening on the key for a change. |
| Frame | Satin anodised aluminium | The long satin anodised surround wipes clean in a second and keeps a big cork panel flat and sharp on a busy passing route, its low glare hiding everyday marks and fingerprints. |
| Internal Clearance | 20mm | A 20mm gap behind the doors lets pinned sheets overlap and thicker documents rest flat instead of bowing against the plastic front. |
| Orientation | Landscape | Landscape is the only way this board hangs, reaching along a broad wall that an upright board would leave part unused down a corridor or workroom run. |
| Fixings | Wall mount kit included | A boxed mount kit with hidden fittings comes with the board, so it beds flat and clean to the wall with no brackets breaking the line across its width. |
| Warranty | 2 years | A two-year guarantee covers the frame, doors and lock against the wear a busy school or office brings over the years. |
| Delivery | Free UK mainland delivery | UK mainland delivery is free of charge, so a wide lockable cork board is a straightforward choice for a school, office or studio wall. |
Free delivery on every order, no minimum spend
UK Mainland standard delivery included on everything we sell.
Standard
Free
Always included, no minimum order
Express
£9.95
Express options shown at checkout where available
Lead time
2 to 3 days
Working days, UK Mainland
Returns
28 days
Original condition and packaging
Good to know
- Orders before 4pm typically ship the same day
- Tracking email sent on dispatch
- Ground-floor, accessible delivery point
Returns must be unused and in original packaging. Full delivery information · Returns policy
Frequently Asked Questions About This Large Tamperproof Cork Pin Board
Q: Which large tamperproof cork pin board is best for a school or office?
A: The best large tamperproof cork pin board for a school or office is the NB7918C, a landscape cork board measuring 1800mm x 1200mm, its natural cork surface set behind two lockable PETG doors in a satin anodised aluminium frame. The wide face takes push pins anywhere, the cork re-pins cleanly time after time, and the locked doors keep every note secure.
Q: Can this board be mounted portrait, or only landscape?
A: It mounts the wide way only, reaching along a corridor or office wall that an upright board would leave part bare. The kit provided sets it horizontal, and that broad span is what a single cork board needs to hold a full week of pinned notes at once.
Q: Why choose cork rather than a felt surface?
A: Cork is made for pinning and re-pinning, closing around each pin hole so the surface stays even through constant change, which suits rotas, plans and project walls. Felt holds pins and staples and reads as more formal, so cork is the pick where notes move often and a natural, tactile look is wanted.
Q: Do I use pins or staples on this cork board?
A: This board is designed for push pins, which press straight into the cork and pull out clean without marking it. Pins are the right fixing for cork because the surface heals around each hole, so a note can be moved as often as needed and the face stays smooth for the next one.
Q: Is a cork board like this right for a busy office?
A: Yes. Team and project walls use this wide cork board for plans, schedules and reference sheets, the surface built for the constant re-pinning an active office needs. The broad face holds a whole department worth of working notes, and the locked doors keep them secure between one update and the next, out of reach of anyone passing the wall.
Q: How many notes can a board this size hold?
A: The extra-wide cork face holds far more than a standard board, so a whole wall of rotas, plans and printed sheets can be pinned across it at once. Because cork re-pins cleanly, the same board carries a display that changes daily without the surface wearing or filling with old staple marks.
Q: What size and weight is this large cork board?
A: This cork landscape board is 1800mm x 1200mm and weighs 20kg, a wide pinning surface for corridors, offices and workrooms. Much of that weight is the aluminium frame and the two glazed doors together, which is why two people fit it more easily than one working alone.
Q: Should I choose this cork board or the felt NB7918GY at the same size?
A: Both measure 1800mm x 1200mm and mount landscape with the same doors and frame. Cork NB7918C is built for push pins and frequent re-pinning, ideal where notes change often. Felt NB7918GY takes pins and staples and suits a more formal, settled display updated less often.
Q: How much room is there behind the doors?
A: A 20mm gap sits between the cork and the doors, room for pinned sheets to layer or a heavier document to lie flat rather than push on the plastic. Depth like that keeps a crowded cork face tidy on a board this broad, so a long overlap of notes still shuts flush behind the doors.
Q: How is a board this large fixed to the wall?
A: The mount kit boxed with the board hides its fittings, so the cork panel sits flush to the wall with no brackets in view along its width. Squaring a board this broad is easiest with two people on a solid wall, one bracing it while the other fixes it home across the span.
Q: Is there a warranty, and is delivery free?
A: A two-year warranty backs the frame, doors and lock, and free UK mainland delivery applies with a 28-day return policy behind every order. That covers a large cork board through the daily wear of a busy school, office or studio at no added setup cost, so the running total stays simple to work out.
Q: Does this board come in other sizes or surfaces?
A: Yes. Yes. A smaller square version is made, and at this width the surface also comes in grey or green felt if cork is not the choice. Whichever is picked, the twin PETG doors, key lock and satin aluminium frame carry over unchanged, so the choice comes down to surface and size alone.
Choosing a Large Cork Pin Board for a Busy Wall
A cork board pays off where notes are pinned, moved and swapped often, so it is worth matching the surface and the size to the way the wall gets used. The Displaysense guides here look at picking a board for a space, making more of a school corridor display, and planning reception boards that stay clear and useful all day.
Overview
Pin Freely and Lock Every Note Away on a Natural Cork Board
A natural cork face lets a push pin go in anywhere and grip, so a long wall becomes one open surface for rotas, plans and printed notes, and behind a pair of lockable doors every pinned sheet stays exactly where it was put. The warm cork tone sits quietly behind whatever is posted, and the surface closes around each pin hole so it can be re-pinned time and again, which suits a corridor, an office or a workroom where a lot of information changes often and needs to stay in order. Set to hang landscape across a broad space, it makes a plain wall into one working pin board a whole team can post to and read at a glance, rather than hunting across several smaller boards. It works best in schools, offices and community venues where notes are pinned, moved and updated daily, and where a full wall of them should stay in order and protected from tampering behind a lock.
Why High-Footfall Spaces Rely on a Large Lockable Pin Board
- A warm natural cork face: Cork gives a long board a soft, earthy look that suits a working wall, and its springy face takes a push pin cleanly wherever a note goes. The natural tone sits quietly behind printed sheets and handwritten cards without drawing the eye from what is pinned up.
- Made for push pins across the width: A push pin presses into the cork and holds a sheet firm, then pulls out clean as the cork closes over the small hole behind. That lets a wide board be re-pinned again and again, so a rota or plan can change through the week and the face stays even.
- A satin anodised aluminium frame: Aluminium runs the length of the board in a low-glare satin finish that shrugs off scuffs and wipes clean fast, keeping a large panel sharp on a busy route. Concealed fixings sit out of sight along the frame for a clean edge.
- Built to hang the wide way: Fixed the horizontal way with the kit provided, the board reaches across a broad wall that a smaller square would leave part bare. That width gives a corridor or workroom one large pinning surface in place of several small ones.
- Doors that lock over the cork: A pair of clear doors shuts across the whole cork surface and locks on a key, putting every pinned note out of reach so nothing can be moved or lifted as people pass. A keyholder opens it to re-pin, which keeps a big shared board reliable.
- Covered by a two-year warranty: The frame, doors and lock are guaranteed for two years, so a pin board earning hard days in a school or office is protected against the wear of heavy daily use. Free UK mainland delivery and a 28-day return policy back every order placed.
Where a Cork Pin Board Suits a Busy Working Wall
| Schools and Staffrooms | Corridor and staffroom walls pin timetables, cover rotas and project work to a natural cork face that takes a fresh pin all day, the locked doors keeping a large school display safe from stray hands between one lesson and the next. |
| Offices and Workrooms | Team walls hold plans, schedules and reference sheets on cork, a surface built for constant re-pinning as a project moves, the wide board carrying a whole department worth of working notes where staff pass through and update them. |
| Community and Leisure Venues | Foyer and hall walls post class times, notices and local flyers on a warm cork surface that feels welcoming to visitors, the broad panel holding a full spread of pinned information behind glazing between one booking and the next. |
| Studios and Workshops | Studio and workshop walls pin sketches, plans and safety notices to cork, a forgiving surface that shrugs off endless pin holes, the large face giving room to lay out a whole project where people work close together and swap sheets often through the day. |
| Universities and Campuses | Common-room and corridor walls run society notices, module information and event flyers on a cork board, a classic pinning surface for a student space, the doors keeping a wide, busy display secure and in order through heavy term-time footfall. |
| Reception and Waiting Areas | Reception and waiting walls show welcome notes, guidance and pinned updates on a calm cork face, easy on the eye for anyone waiting a while, the long board taking a broad run of paper where footfall stays steady through the day. |
Need a Smaller Square Cork Board?
For a tighter wall, the same lockable design is made as the square Tamperproof Cork Aluminium Frame Noticeboard 1200mm x 1200mm. Order with free UK mainland delivery.
Call us on 01279460460 or send us your requirements and we will get back to you.
NB7918C is a Tamperproof Cork Aluminium Noticeboard from Displaysense. An extra-large landscape pin board with two shatterproof PETG doors that guard pinned notices from tampering, a natural cork surface for push pins, and a satin anodised aluminium frame with concealed fixings. Dimensions 1800mm x 1200mm. Weight 20kg. Two lockable shatterproof PETG doors, natural cork surface for push pins, satin anodised aluminium frame with concealed fixings, 20mm internal clearance for layered displays, landscape wall mounting, wall mount kit included, two-year warranty. Used by schools, offices, community venues, staffrooms and studios for rotas, plans, project notes and pinned information behind lockable doors. Also available as a smaller square version and in grey or green felt surfaces at this size. Displaysense, UK display specialist since 1978. Free UK delivery.
Description
Natural cork gives an extra-wide board a warm, tactile face that a push pin sinks into cleanly and grips, holding a sheet flat with no tape, no staples and no marks left behind. The colour is a soft, earthy brown that sits back and lets printed pages and handwritten cards stand out on their own. Across a board this broad the cork offers one continuous surface, so a whole wall of rotas, plans and reminders can be laid out and read together in a single sweep, rather than split between several smaller boards.
Pressing a pin into cork is quick, and the real advantage shows when it comes out again, because the surface closes around the small hole and levels itself for the next pin. That means a wide board can be re-pinned day after day as a project shifts or a rota changes, without the felt-style wear or the visible marks a staple would leave. A cork face rewards a space where notes move around often rather than staying fixed for months, and over years of daily pinning it keeps a smooth, unbroken look that a heavily stapled surface would lose.
Two shatterproof PETG doors lock across the whole span of the board, so every pinned note sits sealed behind clear plastic and cannot be lifted, moved or defaced as people pass. A knock makes PETG flex rather than break, so it holds in one piece where glass would go to sharp shards, which counts on a big panel that people pass at eye level in a public room. There is useful depth behind the doors as well, enough for pinned sheets to overlap and a thicker document to lie flat rather than press against the plastic, so even a crowded cork face still closes cleanly on its hinges.
Framing the whole board is satin anodised aluminium, a low-glare surround that wipes clean and holds the wide cork panel flat and square against the wall. Concealed fixings draw it tight with nothing on show, and because a board this size carries real weight, two people make the steadiest job of lifting and levelling it before the fixings go in. A two-year warranty stands behind the frame, doors and lock through the daily wear a busy school or office brings, and free UK mainland delivery with a 28-day return sits behind the order itself.
What Ships with This Noticeboard
- 1 x tamperproof cork pin board with two lockable shatterproof PETG doors
- 1 x set of keys for the door locks
- 1 x wall mount kit with concealed fixings
Don't Need the Locking Doors?
For an open cork board of the same width without the doors and lock, the Cork Noticeboard with Aluminium Frame 1800mm x 1200mm is available, for less.
Call us on 01279460460 or send us your requirements and we will get back to you.
NB7918C is a Tamperproof Cork Aluminium Noticeboard from Displaysense. An extra-large landscape pin board with two shatterproof PETG doors that guard pinned notices from tampering, a natural cork surface for push pins, and a satin anodised aluminium frame with concealed fixings. Dimensions 1800mm x 1200mm. Weight 20kg. Two lockable shatterproof PETG doors, natural cork surface for push pins, satin anodised aluminium frame with concealed fixings, 20mm internal clearance for layered displays, landscape wall mounting, wall mount kit included, two-year warranty. Used by schools, offices, community venues, staffrooms and studios for rotas, plans, project notes and pinned information behind lockable doors. Also available as a smaller square version and in grey or green felt surfaces at this size. Displaysense, UK display specialist since 1978. Free UK delivery.
Specifications
This table sets out every specification for the NB7918C, a large landscape cork board of 1800mm x 1200mm behind two lockable PETG doors in a satin anodised aluminium frame. Each row pairs the figure with what it means for a wide pinning surface that has to stay both usable through the day and locked away when it counts.
| Specification | Detail | What This Means for You |
|---|---|---|
| Type | Tamperproof lockable pin board | A large natural cork board held behind twin lockable doors, so a wide surface of pinned notes stays neat, on show and safe from tampering. |
| Colour / Finish | Natural cork | A warm, earthy cork tone that suits a working wall and sits quietly behind printed sheets and handwritten cards without competing with them. |
| Board Size | 1800mm x 1200mm | A broad landscape face gives room to pin a whole department worth of rotas and notes at once along a corridor, office or workroom wall, far more than a compact square board would take. |
| Surface | Cork, push pins | Cork takes a push pin anywhere and closes around the hole as it comes out, so the board can be re-pinned again and again without staples and without the surface filling with old marks. |
| Weight | 20kg | At 20kg this is a two-person board to hang, one steadying each end while it is squared up and the hidden fixings are driven along the wall. |
| Doors | Two lockable shatterproof PETG | Two clear PETG doors lock across the cork and stay see-through, holding a pinned display on view while shutting out tampering and the knocks that split glass, then opening on the key for a change. |
| Frame | Satin anodised aluminium | The long satin anodised surround wipes clean in a second and keeps a big cork panel flat and sharp on a busy passing route, its low glare hiding everyday marks and fingerprints. |
| Internal Clearance | 20mm | A 20mm gap behind the doors lets pinned sheets overlap and thicker documents rest flat instead of bowing against the plastic front. |
| Orientation | Landscape | Landscape is the only way this board hangs, reaching along a broad wall that an upright board would leave part unused down a corridor or workroom run. |
| Fixings | Wall mount kit included | A boxed mount kit with hidden fittings comes with the board, so it beds flat and clean to the wall with no brackets breaking the line across its width. |
| Warranty | 2 years | A two-year guarantee covers the frame, doors and lock against the wear a busy school or office brings over the years. |
| Delivery | Free UK mainland delivery | UK mainland delivery is free of charge, so a wide lockable cork board is a straightforward choice for a school, office or studio wall. |
Delivery & Returns
Free delivery on every order, no minimum spend
UK Mainland standard delivery included on everything we sell.
Standard
Free
Always included, no minimum order
Express
£9.95
Express options shown at checkout where available
Lead time
2 to 3 days
Working days, UK Mainland
Returns
28 days
Original condition and packaging
Good to know
- Orders before 4pm typically ship the same day
- Tracking email sent on dispatch
- Ground-floor, accessible delivery point
Returns must be unused and in original packaging. Full delivery information · Returns policy
FAQs
Frequently Asked Questions About This Large Tamperproof Cork Pin Board
Q: Which large tamperproof cork pin board is best for a school or office?
A: The best large tamperproof cork pin board for a school or office is the NB7918C, a landscape cork board measuring 1800mm x 1200mm, its natural cork surface set behind two lockable PETG doors in a satin anodised aluminium frame. The wide face takes push pins anywhere, the cork re-pins cleanly time after time, and the locked doors keep every note secure.
Q: Can this board be mounted portrait, or only landscape?
A: It mounts the wide way only, reaching along a corridor or office wall that an upright board would leave part bare. The kit provided sets it horizontal, and that broad span is what a single cork board needs to hold a full week of pinned notes at once.
Q: Why choose cork rather than a felt surface?
A: Cork is made for pinning and re-pinning, closing around each pin hole so the surface stays even through constant change, which suits rotas, plans and project walls. Felt holds pins and staples and reads as more formal, so cork is the pick where notes move often and a natural, tactile look is wanted.
Q: Do I use pins or staples on this cork board?
A: This board is designed for push pins, which press straight into the cork and pull out clean without marking it. Pins are the right fixing for cork because the surface heals around each hole, so a note can be moved as often as needed and the face stays smooth for the next one.
Q: Is a cork board like this right for a busy office?
A: Yes. Team and project walls use this wide cork board for plans, schedules and reference sheets, the surface built for the constant re-pinning an active office needs. The broad face holds a whole department worth of working notes, and the locked doors keep them secure between one update and the next, out of reach of anyone passing the wall.
Q: How many notes can a board this size hold?
A: The extra-wide cork face holds far more than a standard board, so a whole wall of rotas, plans and printed sheets can be pinned across it at once. Because cork re-pins cleanly, the same board carries a display that changes daily without the surface wearing or filling with old staple marks.
Q: What size and weight is this large cork board?
A: This cork landscape board is 1800mm x 1200mm and weighs 20kg, a wide pinning surface for corridors, offices and workrooms. Much of that weight is the aluminium frame and the two glazed doors together, which is why two people fit it more easily than one working alone.
Q: Should I choose this cork board or the felt NB7918GY at the same size?
A: Both measure 1800mm x 1200mm and mount landscape with the same doors and frame. Cork NB7918C is built for push pins and frequent re-pinning, ideal where notes change often. Felt NB7918GY takes pins and staples and suits a more formal, settled display updated less often.
Q: How much room is there behind the doors?
A: A 20mm gap sits between the cork and the doors, room for pinned sheets to layer or a heavier document to lie flat rather than push on the plastic. Depth like that keeps a crowded cork face tidy on a board this broad, so a long overlap of notes still shuts flush behind the doors.
Q: How is a board this large fixed to the wall?
A: The mount kit boxed with the board hides its fittings, so the cork panel sits flush to the wall with no brackets in view along its width. Squaring a board this broad is easiest with two people on a solid wall, one bracing it while the other fixes it home across the span.
Q: Is there a warranty, and is delivery free?
A: A two-year warranty backs the frame, doors and lock, and free UK mainland delivery applies with a 28-day return policy behind every order. That covers a large cork board through the daily wear of a busy school, office or studio at no added setup cost, so the running total stays simple to work out.
Q: Does this board come in other sizes or surfaces?
A: Yes. Yes. A smaller square version is made, and at this width the surface also comes in grey or green felt if cork is not the choice. Whichever is picked, the twin PETG doors, key lock and satin aluminium frame carry over unchanged, so the choice comes down to surface and size alone.
Knowledge Hub
Choosing a Large Cork Pin Board for a Busy Wall
A cork board pays off where notes are pinned, moved and swapped often, so it is worth matching the surface and the size to the way the wall gets used. The Displaysense guides here look at picking a board for a space, making more of a school corridor display, and planning reception boards that stay clear and useful all day.
Tamperproof Cork Aluminium Frame Noticeboard - 1800mm x 1200mm
| Quantity | Discount | Save |
|---|---|---|
| 5 - 9 | 3% off | £8.82 |
| 10 + | 5% off | £14.70 |
Overview
Description
Specifications
Delivery & Returns
FAQs
Knowledge Hub
Pin Freely and Lock Every Note Away on a Natural Cork Board
A natural cork face lets a push pin go in anywhere and grip, so a long wall becomes one open surface for rotas, plans and printed notes, and behind a pair of lockable doors every pinned sheet stays exactly where it was put. The warm cork tone sits quietly behind whatever is posted, and the surface closes around each pin hole so it can be re-pinned time and again, which suits a corridor, an office or a workroom where a lot of information changes often and needs to stay in order. Set to hang landscape across a broad space, it makes a plain wall into one working pin board a whole team can post to and read at a glance, rather than hunting across several smaller boards. It works best in schools, offices and community venues where notes are pinned, moved and updated daily, and where a full wall of them should stay in order and protected from tampering behind a lock.
Why High-Footfall Spaces Rely on a Large Lockable Pin Board
- A warm natural cork face: Cork gives a long board a soft, earthy look that suits a working wall, and its springy face takes a push pin cleanly wherever a note goes. The natural tone sits quietly behind printed sheets and handwritten cards without drawing the eye from what is pinned up.
- Made for push pins across the width: A push pin presses into the cork and holds a sheet firm, then pulls out clean as the cork closes over the small hole behind. That lets a wide board be re-pinned again and again, so a rota or plan can change through the week and the face stays even.
- A satin anodised aluminium frame: Aluminium runs the length of the board in a low-glare satin finish that shrugs off scuffs and wipes clean fast, keeping a large panel sharp on a busy route. Concealed fixings sit out of sight along the frame for a clean edge.
- Built to hang the wide way: Fixed the horizontal way with the kit provided, the board reaches across a broad wall that a smaller square would leave part bare. That width gives a corridor or workroom one large pinning surface in place of several small ones.
- Doors that lock over the cork: A pair of clear doors shuts across the whole cork surface and locks on a key, putting every pinned note out of reach so nothing can be moved or lifted as people pass. A keyholder opens it to re-pin, which keeps a big shared board reliable.
- Covered by a two-year warranty: The frame, doors and lock are guaranteed for two years, so a pin board earning hard days in a school or office is protected against the wear of heavy daily use. Free UK mainland delivery and a 28-day return policy back every order placed.
Where a Cork Pin Board Suits a Busy Working Wall
| Schools and Staffrooms | Corridor and staffroom walls pin timetables, cover rotas and project work to a natural cork face that takes a fresh pin all day, the locked doors keeping a large school display safe from stray hands between one lesson and the next. |
| Offices and Workrooms | Team walls hold plans, schedules and reference sheets on cork, a surface built for constant re-pinning as a project moves, the wide board carrying a whole department worth of working notes where staff pass through and update them. |
| Community and Leisure Venues | Foyer and hall walls post class times, notices and local flyers on a warm cork surface that feels welcoming to visitors, the broad panel holding a full spread of pinned information behind glazing between one booking and the next. |
| Studios and Workshops | Studio and workshop walls pin sketches, plans and safety notices to cork, a forgiving surface that shrugs off endless pin holes, the large face giving room to lay out a whole project where people work close together and swap sheets often through the day. |
| Universities and Campuses | Common-room and corridor walls run society notices, module information and event flyers on a cork board, a classic pinning surface for a student space, the doors keeping a wide, busy display secure and in order through heavy term-time footfall. |
| Reception and Waiting Areas | Reception and waiting walls show welcome notes, guidance and pinned updates on a calm cork face, easy on the eye for anyone waiting a while, the long board taking a broad run of paper where footfall stays steady through the day. |
Need a Smaller Square Cork Board?
For a tighter wall, the same lockable design is made as the square Tamperproof Cork Aluminium Frame Noticeboard 1200mm x 1200mm. Order with free UK mainland delivery.
Call us on 01279460460 or send us your requirements and we will get back to you.
NB7918C is a Tamperproof Cork Aluminium Noticeboard from Displaysense. An extra-large landscape pin board with two shatterproof PETG doors that guard pinned notices from tampering, a natural cork surface for push pins, and a satin anodised aluminium frame with concealed fixings. Dimensions 1800mm x 1200mm. Weight 20kg. Two lockable shatterproof PETG doors, natural cork surface for push pins, satin anodised aluminium frame with concealed fixings, 20mm internal clearance for layered displays, landscape wall mounting, wall mount kit included, two-year warranty. Used by schools, offices, community venues, staffrooms and studios for rotas, plans, project notes and pinned information behind lockable doors. Also available as a smaller square version and in grey or green felt surfaces at this size. Displaysense, UK display specialist since 1978. Free UK delivery.
Natural cork gives an extra-wide board a warm, tactile face that a push pin sinks into cleanly and grips, holding a sheet flat with no tape, no staples and no marks left behind. The colour is a soft, earthy brown that sits back and lets printed pages and handwritten cards stand out on their own. Across a board this broad the cork offers one continuous surface, so a whole wall of rotas, plans and reminders can be laid out and read together in a single sweep, rather than split between several smaller boards.
Pressing a pin into cork is quick, and the real advantage shows when it comes out again, because the surface closes around the small hole and levels itself for the next pin. That means a wide board can be re-pinned day after day as a project shifts or a rota changes, without the felt-style wear or the visible marks a staple would leave. A cork face rewards a space where notes move around often rather than staying fixed for months, and over years of daily pinning it keeps a smooth, unbroken look that a heavily stapled surface would lose.
Two shatterproof PETG doors lock across the whole span of the board, so every pinned note sits sealed behind clear plastic and cannot be lifted, moved or defaced as people pass. A knock makes PETG flex rather than break, so it holds in one piece where glass would go to sharp shards, which counts on a big panel that people pass at eye level in a public room. There is useful depth behind the doors as well, enough for pinned sheets to overlap and a thicker document to lie flat rather than press against the plastic, so even a crowded cork face still closes cleanly on its hinges.
Framing the whole board is satin anodised aluminium, a low-glare surround that wipes clean and holds the wide cork panel flat and square against the wall. Concealed fixings draw it tight with nothing on show, and because a board this size carries real weight, two people make the steadiest job of lifting and levelling it before the fixings go in. A two-year warranty stands behind the frame, doors and lock through the daily wear a busy school or office brings, and free UK mainland delivery with a 28-day return sits behind the order itself.
What Ships with This Noticeboard
- 1 x tamperproof cork pin board with two lockable shatterproof PETG doors
- 1 x set of keys for the door locks
- 1 x wall mount kit with concealed fixings
Don't Need the Locking Doors?
For an open cork board of the same width without the doors and lock, the Cork Noticeboard with Aluminium Frame 1800mm x 1200mm is available, for less.
Call us on 01279460460 or send us your requirements and we will get back to you.
NB7918C is a Tamperproof Cork Aluminium Noticeboard from Displaysense. An extra-large landscape pin board with two shatterproof PETG doors that guard pinned notices from tampering, a natural cork surface for push pins, and a satin anodised aluminium frame with concealed fixings. Dimensions 1800mm x 1200mm. Weight 20kg. Two lockable shatterproof PETG doors, natural cork surface for push pins, satin anodised aluminium frame with concealed fixings, 20mm internal clearance for layered displays, landscape wall mounting, wall mount kit included, two-year warranty. Used by schools, offices, community venues, staffrooms and studios for rotas, plans, project notes and pinned information behind lockable doors. Also available as a smaller square version and in grey or green felt surfaces at this size. Displaysense, UK display specialist since 1978. Free UK delivery.
This table sets out every specification for the NB7918C, a large landscape cork board of 1800mm x 1200mm behind two lockable PETG doors in a satin anodised aluminium frame. Each row pairs the figure with what it means for a wide pinning surface that has to stay both usable through the day and locked away when it counts.
| Specification | Detail | What This Means for You |
|---|---|---|
| Type | Tamperproof lockable pin board | A large natural cork board held behind twin lockable doors, so a wide surface of pinned notes stays neat, on show and safe from tampering. |
| Colour / Finish | Natural cork | A warm, earthy cork tone that suits a working wall and sits quietly behind printed sheets and handwritten cards without competing with them. |
| Board Size | 1800mm x 1200mm | A broad landscape face gives room to pin a whole department worth of rotas and notes at once along a corridor, office or workroom wall, far more than a compact square board would take. |
| Surface | Cork, push pins | Cork takes a push pin anywhere and closes around the hole as it comes out, so the board can be re-pinned again and again without staples and without the surface filling with old marks. |
| Weight | 20kg | At 20kg this is a two-person board to hang, one steadying each end while it is squared up and the hidden fixings are driven along the wall. |
| Doors | Two lockable shatterproof PETG | Two clear PETG doors lock across the cork and stay see-through, holding a pinned display on view while shutting out tampering and the knocks that split glass, then opening on the key for a change. |
| Frame | Satin anodised aluminium | The long satin anodised surround wipes clean in a second and keeps a big cork panel flat and sharp on a busy passing route, its low glare hiding everyday marks and fingerprints. |
| Internal Clearance | 20mm | A 20mm gap behind the doors lets pinned sheets overlap and thicker documents rest flat instead of bowing against the plastic front. |
| Orientation | Landscape | Landscape is the only way this board hangs, reaching along a broad wall that an upright board would leave part unused down a corridor or workroom run. |
| Fixings | Wall mount kit included | A boxed mount kit with hidden fittings comes with the board, so it beds flat and clean to the wall with no brackets breaking the line across its width. |
| Warranty | 2 years | A two-year guarantee covers the frame, doors and lock against the wear a busy school or office brings over the years. |
| Delivery | Free UK mainland delivery | UK mainland delivery is free of charge, so a wide lockable cork board is a straightforward choice for a school, office or studio wall. |
Free delivery on every order, no minimum spend
UK Mainland standard delivery included on everything we sell.
Standard
Free
Always included, no minimum order
Express
£9.95
Express options shown at checkout where available
Lead time
2 to 3 days
Working days, UK Mainland
Returns
28 days
Original condition and packaging
Good to know
- Orders before 4pm typically ship the same day
- Tracking email sent on dispatch
- Ground-floor, accessible delivery point
Returns must be unused and in original packaging. Full delivery information · Returns policy
Frequently Asked Questions About This Large Tamperproof Cork Pin Board
Q: Which large tamperproof cork pin board is best for a school or office?
A: The best large tamperproof cork pin board for a school or office is the NB7918C, a landscape cork board measuring 1800mm x 1200mm, its natural cork surface set behind two lockable PETG doors in a satin anodised aluminium frame. The wide face takes push pins anywhere, the cork re-pins cleanly time after time, and the locked doors keep every note secure.
Q: Can this board be mounted portrait, or only landscape?
A: It mounts the wide way only, reaching along a corridor or office wall that an upright board would leave part bare. The kit provided sets it horizontal, and that broad span is what a single cork board needs to hold a full week of pinned notes at once.
Q: Why choose cork rather than a felt surface?
A: Cork is made for pinning and re-pinning, closing around each pin hole so the surface stays even through constant change, which suits rotas, plans and project walls. Felt holds pins and staples and reads as more formal, so cork is the pick where notes move often and a natural, tactile look is wanted.
Q: Do I use pins or staples on this cork board?
A: This board is designed for push pins, which press straight into the cork and pull out clean without marking it. Pins are the right fixing for cork because the surface heals around each hole, so a note can be moved as often as needed and the face stays smooth for the next one.
Q: Is a cork board like this right for a busy office?
A: Yes. Team and project walls use this wide cork board for plans, schedules and reference sheets, the surface built for the constant re-pinning an active office needs. The broad face holds a whole department worth of working notes, and the locked doors keep them secure between one update and the next, out of reach of anyone passing the wall.
Q: How many notes can a board this size hold?
A: The extra-wide cork face holds far more than a standard board, so a whole wall of rotas, plans and printed sheets can be pinned across it at once. Because cork re-pins cleanly, the same board carries a display that changes daily without the surface wearing or filling with old staple marks.
Q: What size and weight is this large cork board?
A: This cork landscape board is 1800mm x 1200mm and weighs 20kg, a wide pinning surface for corridors, offices and workrooms. Much of that weight is the aluminium frame and the two glazed doors together, which is why two people fit it more easily than one working alone.
Q: Should I choose this cork board or the felt NB7918GY at the same size?
A: Both measure 1800mm x 1200mm and mount landscape with the same doors and frame. Cork NB7918C is built for push pins and frequent re-pinning, ideal where notes change often. Felt NB7918GY takes pins and staples and suits a more formal, settled display updated less often.
Q: How much room is there behind the doors?
A: A 20mm gap sits between the cork and the doors, room for pinned sheets to layer or a heavier document to lie flat rather than push on the plastic. Depth like that keeps a crowded cork face tidy on a board this broad, so a long overlap of notes still shuts flush behind the doors.
Q: How is a board this large fixed to the wall?
A: The mount kit boxed with the board hides its fittings, so the cork panel sits flush to the wall with no brackets in view along its width. Squaring a board this broad is easiest with two people on a solid wall, one bracing it while the other fixes it home across the span.
Q: Is there a warranty, and is delivery free?
A: A two-year warranty backs the frame, doors and lock, and free UK mainland delivery applies with a 28-day return policy behind every order. That covers a large cork board through the daily wear of a busy school, office or studio at no added setup cost, so the running total stays simple to work out.
Q: Does this board come in other sizes or surfaces?
A: Yes. Yes. A smaller square version is made, and at this width the surface also comes in grey or green felt if cork is not the choice. Whichever is picked, the twin PETG doors, key lock and satin aluminium frame carry over unchanged, so the choice comes down to surface and size alone.
Choosing a Large Cork Pin Board for a Busy Wall
A cork board pays off where notes are pinned, moved and swapped often, so it is worth matching the surface and the size to the way the wall gets used. The Displaysense guides here look at picking a board for a space, making more of a school corridor display, and planning reception boards that stay clear and useful all day.
Overview
Pin Freely and Lock Every Note Away on a Natural Cork Board
A natural cork face lets a push pin go in anywhere and grip, so a long wall becomes one open surface for rotas, plans and printed notes, and behind a pair of lockable doors every pinned sheet stays exactly where it was put. The warm cork tone sits quietly behind whatever is posted, and the surface closes around each pin hole so it can be re-pinned time and again, which suits a corridor, an office or a workroom where a lot of information changes often and needs to stay in order. Set to hang landscape across a broad space, it makes a plain wall into one working pin board a whole team can post to and read at a glance, rather than hunting across several smaller boards. It works best in schools, offices and community venues where notes are pinned, moved and updated daily, and where a full wall of them should stay in order and protected from tampering behind a lock.
Why High-Footfall Spaces Rely on a Large Lockable Pin Board
- A warm natural cork face: Cork gives a long board a soft, earthy look that suits a working wall, and its springy face takes a push pin cleanly wherever a note goes. The natural tone sits quietly behind printed sheets and handwritten cards without drawing the eye from what is pinned up.
- Made for push pins across the width: A push pin presses into the cork and holds a sheet firm, then pulls out clean as the cork closes over the small hole behind. That lets a wide board be re-pinned again and again, so a rota or plan can change through the week and the face stays even.
- A satin anodised aluminium frame: Aluminium runs the length of the board in a low-glare satin finish that shrugs off scuffs and wipes clean fast, keeping a large panel sharp on a busy route. Concealed fixings sit out of sight along the frame for a clean edge.
- Built to hang the wide way: Fixed the horizontal way with the kit provided, the board reaches across a broad wall that a smaller square would leave part bare. That width gives a corridor or workroom one large pinning surface in place of several small ones.
- Doors that lock over the cork: A pair of clear doors shuts across the whole cork surface and locks on a key, putting every pinned note out of reach so nothing can be moved or lifted as people pass. A keyholder opens it to re-pin, which keeps a big shared board reliable.
- Covered by a two-year warranty: The frame, doors and lock are guaranteed for two years, so a pin board earning hard days in a school or office is protected against the wear of heavy daily use. Free UK mainland delivery and a 28-day return policy back every order placed.
Where a Cork Pin Board Suits a Busy Working Wall
| Schools and Staffrooms | Corridor and staffroom walls pin timetables, cover rotas and project work to a natural cork face that takes a fresh pin all day, the locked doors keeping a large school display safe from stray hands between one lesson and the next. |
| Offices and Workrooms | Team walls hold plans, schedules and reference sheets on cork, a surface built for constant re-pinning as a project moves, the wide board carrying a whole department worth of working notes where staff pass through and update them. |
| Community and Leisure Venues | Foyer and hall walls post class times, notices and local flyers on a warm cork surface that feels welcoming to visitors, the broad panel holding a full spread of pinned information behind glazing between one booking and the next. |
| Studios and Workshops | Studio and workshop walls pin sketches, plans and safety notices to cork, a forgiving surface that shrugs off endless pin holes, the large face giving room to lay out a whole project where people work close together and swap sheets often through the day. |
| Universities and Campuses | Common-room and corridor walls run society notices, module information and event flyers on a cork board, a classic pinning surface for a student space, the doors keeping a wide, busy display secure and in order through heavy term-time footfall. |
| Reception and Waiting Areas | Reception and waiting walls show welcome notes, guidance and pinned updates on a calm cork face, easy on the eye for anyone waiting a while, the long board taking a broad run of paper where footfall stays steady through the day. |
Need a Smaller Square Cork Board?
For a tighter wall, the same lockable design is made as the square Tamperproof Cork Aluminium Frame Noticeboard 1200mm x 1200mm. Order with free UK mainland delivery.
Call us on 01279460460 or send us your requirements and we will get back to you.
NB7918C is a Tamperproof Cork Aluminium Noticeboard from Displaysense. An extra-large landscape pin board with two shatterproof PETG doors that guard pinned notices from tampering, a natural cork surface for push pins, and a satin anodised aluminium frame with concealed fixings. Dimensions 1800mm x 1200mm. Weight 20kg. Two lockable shatterproof PETG doors, natural cork surface for push pins, satin anodised aluminium frame with concealed fixings, 20mm internal clearance for layered displays, landscape wall mounting, wall mount kit included, two-year warranty. Used by schools, offices, community venues, staffrooms and studios for rotas, plans, project notes and pinned information behind lockable doors. Also available as a smaller square version and in grey or green felt surfaces at this size. Displaysense, UK display specialist since 1978. Free UK delivery.
Description
Natural cork gives an extra-wide board a warm, tactile face that a push pin sinks into cleanly and grips, holding a sheet flat with no tape, no staples and no marks left behind. The colour is a soft, earthy brown that sits back and lets printed pages and handwritten cards stand out on their own. Across a board this broad the cork offers one continuous surface, so a whole wall of rotas, plans and reminders can be laid out and read together in a single sweep, rather than split between several smaller boards.
Pressing a pin into cork is quick, and the real advantage shows when it comes out again, because the surface closes around the small hole and levels itself for the next pin. That means a wide board can be re-pinned day after day as a project shifts or a rota changes, without the felt-style wear or the visible marks a staple would leave. A cork face rewards a space where notes move around often rather than staying fixed for months, and over years of daily pinning it keeps a smooth, unbroken look that a heavily stapled surface would lose.
Two shatterproof PETG doors lock across the whole span of the board, so every pinned note sits sealed behind clear plastic and cannot be lifted, moved or defaced as people pass. A knock makes PETG flex rather than break, so it holds in one piece where glass would go to sharp shards, which counts on a big panel that people pass at eye level in a public room. There is useful depth behind the doors as well, enough for pinned sheets to overlap and a thicker document to lie flat rather than press against the plastic, so even a crowded cork face still closes cleanly on its hinges.
Framing the whole board is satin anodised aluminium, a low-glare surround that wipes clean and holds the wide cork panel flat and square against the wall. Concealed fixings draw it tight with nothing on show, and because a board this size carries real weight, two people make the steadiest job of lifting and levelling it before the fixings go in. A two-year warranty stands behind the frame, doors and lock through the daily wear a busy school or office brings, and free UK mainland delivery with a 28-day return sits behind the order itself.
What Ships with This Noticeboard
- 1 x tamperproof cork pin board with two lockable shatterproof PETG doors
- 1 x set of keys for the door locks
- 1 x wall mount kit with concealed fixings
Don't Need the Locking Doors?
For an open cork board of the same width without the doors and lock, the Cork Noticeboard with Aluminium Frame 1800mm x 1200mm is available, for less.
Call us on 01279460460 or send us your requirements and we will get back to you.
NB7918C is a Tamperproof Cork Aluminium Noticeboard from Displaysense. An extra-large landscape pin board with two shatterproof PETG doors that guard pinned notices from tampering, a natural cork surface for push pins, and a satin anodised aluminium frame with concealed fixings. Dimensions 1800mm x 1200mm. Weight 20kg. Two lockable shatterproof PETG doors, natural cork surface for push pins, satin anodised aluminium frame with concealed fixings, 20mm internal clearance for layered displays, landscape wall mounting, wall mount kit included, two-year warranty. Used by schools, offices, community venues, staffrooms and studios for rotas, plans, project notes and pinned information behind lockable doors. Also available as a smaller square version and in grey or green felt surfaces at this size. Displaysense, UK display specialist since 1978. Free UK delivery.
Specifications
This table sets out every specification for the NB7918C, a large landscape cork board of 1800mm x 1200mm behind two lockable PETG doors in a satin anodised aluminium frame. Each row pairs the figure with what it means for a wide pinning surface that has to stay both usable through the day and locked away when it counts.
| Specification | Detail | What This Means for You |
|---|---|---|
| Type | Tamperproof lockable pin board | A large natural cork board held behind twin lockable doors, so a wide surface of pinned notes stays neat, on show and safe from tampering. |
| Colour / Finish | Natural cork | A warm, earthy cork tone that suits a working wall and sits quietly behind printed sheets and handwritten cards without competing with them. |
| Board Size | 1800mm x 1200mm | A broad landscape face gives room to pin a whole department worth of rotas and notes at once along a corridor, office or workroom wall, far more than a compact square board would take. |
| Surface | Cork, push pins | Cork takes a push pin anywhere and closes around the hole as it comes out, so the board can be re-pinned again and again without staples and without the surface filling with old marks. |
| Weight | 20kg | At 20kg this is a two-person board to hang, one steadying each end while it is squared up and the hidden fixings are driven along the wall. |
| Doors | Two lockable shatterproof PETG | Two clear PETG doors lock across the cork and stay see-through, holding a pinned display on view while shutting out tampering and the knocks that split glass, then opening on the key for a change. |
| Frame | Satin anodised aluminium | The long satin anodised surround wipes clean in a second and keeps a big cork panel flat and sharp on a busy passing route, its low glare hiding everyday marks and fingerprints. |
| Internal Clearance | 20mm | A 20mm gap behind the doors lets pinned sheets overlap and thicker documents rest flat instead of bowing against the plastic front. |
| Orientation | Landscape | Landscape is the only way this board hangs, reaching along a broad wall that an upright board would leave part unused down a corridor or workroom run. |
| Fixings | Wall mount kit included | A boxed mount kit with hidden fittings comes with the board, so it beds flat and clean to the wall with no brackets breaking the line across its width. |
| Warranty | 2 years | A two-year guarantee covers the frame, doors and lock against the wear a busy school or office brings over the years. |
| Delivery | Free UK mainland delivery | UK mainland delivery is free of charge, so a wide lockable cork board is a straightforward choice for a school, office or studio wall. |
Delivery & Returns
Free delivery on every order, no minimum spend
UK Mainland standard delivery included on everything we sell.
Standard
Free
Always included, no minimum order
Express
£9.95
Express options shown at checkout where available
Lead time
2 to 3 days
Working days, UK Mainland
Returns
28 days
Original condition and packaging
Good to know
- Orders before 4pm typically ship the same day
- Tracking email sent on dispatch
- Ground-floor, accessible delivery point
Returns must be unused and in original packaging. Full delivery information · Returns policy
FAQs
Frequently Asked Questions About This Large Tamperproof Cork Pin Board
Q: Which large tamperproof cork pin board is best for a school or office?
A: The best large tamperproof cork pin board for a school or office is the NB7918C, a landscape cork board measuring 1800mm x 1200mm, its natural cork surface set behind two lockable PETG doors in a satin anodised aluminium frame. The wide face takes push pins anywhere, the cork re-pins cleanly time after time, and the locked doors keep every note secure.
Q: Can this board be mounted portrait, or only landscape?
A: It mounts the wide way only, reaching along a corridor or office wall that an upright board would leave part bare. The kit provided sets it horizontal, and that broad span is what a single cork board needs to hold a full week of pinned notes at once.
Q: Why choose cork rather than a felt surface?
A: Cork is made for pinning and re-pinning, closing around each pin hole so the surface stays even through constant change, which suits rotas, plans and project walls. Felt holds pins and staples and reads as more formal, so cork is the pick where notes move often and a natural, tactile look is wanted.
Q: Do I use pins or staples on this cork board?
A: This board is designed for push pins, which press straight into the cork and pull out clean without marking it. Pins are the right fixing for cork because the surface heals around each hole, so a note can be moved as often as needed and the face stays smooth for the next one.
Q: Is a cork board like this right for a busy office?
A: Yes. Team and project walls use this wide cork board for plans, schedules and reference sheets, the surface built for the constant re-pinning an active office needs. The broad face holds a whole department worth of working notes, and the locked doors keep them secure between one update and the next, out of reach of anyone passing the wall.
Q: How many notes can a board this size hold?
A: The extra-wide cork face holds far more than a standard board, so a whole wall of rotas, plans and printed sheets can be pinned across it at once. Because cork re-pins cleanly, the same board carries a display that changes daily without the surface wearing or filling with old staple marks.
Q: What size and weight is this large cork board?
A: This cork landscape board is 1800mm x 1200mm and weighs 20kg, a wide pinning surface for corridors, offices and workrooms. Much of that weight is the aluminium frame and the two glazed doors together, which is why two people fit it more easily than one working alone.
Q: Should I choose this cork board or the felt NB7918GY at the same size?
A: Both measure 1800mm x 1200mm and mount landscape with the same doors and frame. Cork NB7918C is built for push pins and frequent re-pinning, ideal where notes change often. Felt NB7918GY takes pins and staples and suits a more formal, settled display updated less often.
Q: How much room is there behind the doors?
A: A 20mm gap sits between the cork and the doors, room for pinned sheets to layer or a heavier document to lie flat rather than push on the plastic. Depth like that keeps a crowded cork face tidy on a board this broad, so a long overlap of notes still shuts flush behind the doors.
Q: How is a board this large fixed to the wall?
A: The mount kit boxed with the board hides its fittings, so the cork panel sits flush to the wall with no brackets in view along its width. Squaring a board this broad is easiest with two people on a solid wall, one bracing it while the other fixes it home across the span.
Q: Is there a warranty, and is delivery free?
A: A two-year warranty backs the frame, doors and lock, and free UK mainland delivery applies with a 28-day return policy behind every order. That covers a large cork board through the daily wear of a busy school, office or studio at no added setup cost, so the running total stays simple to work out.
Q: Does this board come in other sizes or surfaces?
A: Yes. Yes. A smaller square version is made, and at this width the surface also comes in grey or green felt if cork is not the choice. Whichever is picked, the twin PETG doors, key lock and satin aluminium frame carry over unchanged, so the choice comes down to surface and size alone.
Knowledge Hub
Choosing a Large Cork Pin Board for a Busy Wall
A cork board pays off where notes are pinned, moved and swapped often, so it is worth matching the surface and the size to the way the wall gets used. The Displaysense guides here look at picking a board for a space, making more of a school corridor display, and planning reception boards that stay clear and useful all day.
