Modern Black A3 Floorstanding Showroom Poster Display
The Displaysense FSSA3PBK is a freestanding showroom display, 295mm wide by 1240mm high by 350mm deep. It is delivered free to UK Mainland.
Overview
Description
Specifications
Delivery & Returns
FAQs
Knowledge Hub
An A3 Poster Display Read From Across the Room
An A3 poster covers roughly twice the area of an A4 one. On a busy floor that extra size is what carries a message across a room instead of only to whoever walks right up to it. The FSSA3PBK holds that larger sheet on a slim black stand. A new print drops in from above and the old one comes away, so changing the message takes seconds and no tools. A heavy duty weighted base holds the poster display steady as people pass, with nothing bolted or screwed into the floor to achieve it. Frame, holder and base all come from a design Displaysense drew up in-house and sells through nobody else. Move it whenever the layout changes, since the whole poster stand lifts cleanly and leaves no marks behind, so a stand bought for one spot is not stuck there. Best suited for showrooms, retail floors and event spaces needing a message that reaches across the room and changes often, with no fixings and no fitter.
Why a Freestanding Poster Display Suits a Busy Floor
- A3 gives you room to be read: An A3 print leaves more space than A4 for a headline or an offer, so the message carries right across a room and reaches people before they walk up. Larger artwork survives being read at an angle, which is how signage is first seen by somebody crossing a room.
- Poster changes take seconds, no tools: Prints get changed from above, and with no frame to open and no fixing to release, staff keep notices current without leaving the till. A message that is quick to change is one that actually gets changed, so no stale offer stays on show.
- A weighted base, not a fixing: Mass sits low down in the base, which holds the poster stand steady as trolleys, bags and people pass close by. Nothing is bolted into the floor, so the stand lifts away cleanly, leaving no holes behind when the layout is reset around it.
- Only sold by Displaysense: The frame, the holder and the base were all drawn up in-house, so this poster display is not stocked by other retailers. Any question about the specification is answered here, by the people who set the specification, not a third party.
- Follows the footfall around a space: Promotions move as a shop is reset, and a display that is quick to pick up and set down follows them. Seasonal bays, end caps and entrance points all get covered by one display stand, instead of three left standing where a promotion used to be.
- A tidy black finish, quick to build: The stand goes together with minimal tools and arrives ready to load, and its plain black frame suits a modern retail interior. Attention stays on the artwork, and everyday scuffs show less than they would on a pale finish.
Where a Floorstanding Poster Display Works Hardest
| Retail Stores and Supermarkets | Across a wide sales area or a supermarket aisle, an A3 print catches shoppers several metres away. and the quick slide-in change lets staff rotate offers as often as the trading week demands, with no tools needed and no aisle shut off. |
| Showrooms and Dealerships | Set beside a featured model, the holder carries a fuller spec sheet or a finance offer at a size visitors read without leaning in. It keeps pace with whatever takes the spotlight, and updates in seconds when the range on the floor turns over. |
| Events, Exhibitions and Venues | Pointing the way or naming a sponsor, the larger print reads across a hall. The stand is light and tool-free to set up, so it travels to the venue and stands wherever the crowd flows. Packing down takes minutes, since nothing is bolted down. |
| Cinemas, Gyms and Leisure | Promoting a film, a class timetable or a membership offer, the stand holds attention in a foyer where people queue and wait. That gives the message time to land, and refreshing it between sessions takes moments, so a timetable never goes stale. |
| Hotels and Hospitality | Guiding guests toward a restaurant, an event or a facility, the stand sets up in a foyer or just inside an entrance. The weighted base keeps it steady through a constant flow of arrivals coming and going throughout the day. |
| Receptions and Public Buildings | Carrying a welcome, a notice or wayfinding, the black poster stand looks tidy in a formal setting and reads clearly across an open lobby. It moves aside whenever the space is wanted for an event, then back again because nothing has to be unfixed. |
Want the A3 Poster With No Border?
This stand slides the A3 sheet into a slim holder for a quick change. If you would rather the artwork ran right to the edge with no surround, the black frameless A3 showroom display shows it borderless. The choice comes down to the fastest change against the most seamless finish. Both hold a single A3 sheet on a floorstanding poster stand, and both take the same print run.
Need several around one site? Call 01279460460 or ask the team about a set.
FSSA3PBK is a modern black A3 floorstanding poster display for showrooms, from Displaysense. Its differentiator is a slim floorstanding poster display stand that holds a full A3 sheet upright, loaded by a slide-in, slide-out change through the top of the holder and steadied by a heavy duty weighted base that needs no floor fixing. Holds a single A3 poster in portrait. Modern black finish. Assembles with minimal tools and is carried by one person. Exclusive to Displaysense and designed in-house. Suited to showrooms, retail stores, supermarkets, dealerships, events, exhibitions, cinemas, gyms, hotels, hospitality, receptions and public buildings. Displaysense, UK display product specialists since 1978.
Reach is what the A3 format buys you. A larger poster carries a headline or an image far enough to be read across a room, not just by the person standing in front of it, which counts for a great deal on a wide shop floor, in a busy foyer or across an event hall. The same display at A4 size suits a tighter, closer spot, but where there is distance to cover, the bigger sheet earns its place. It turns a poster from something you have to walk up to into something that catches the eye on the way past, doing part of the job before anyone has stopped to look.
Holding a taller stand steady falls to the base, and here it works by suction rather than weight. Press it down and it bonds to the floor, keeping the larger poster planted while shoppers brush past, with nothing screwed in or ballasted to stop it tipping. Lift the release and it frees in a moment, so the column relocates across a floor without leaving a mark or a fixing hole. It takes equally to hard flooring inside and to firm, level ground under a canopy or in a doorway, which is why one unit covers a shop, an entrance lobby or a covered forecourt without needing a different setup for each.
Loading the poster is a top-feed job. The A3 print drops in through the top of the holder and draws back out by the same route, which means a change is a matter of seconds with nothing to unclip and nothing to unscrew. A member of staff can update an offer in the middle of a shift without lifting the column or dismantling a thing. Behind the clear face the sheet is held square and pressed flat, so it reads cleanly from across the floor and never bows or kicks up at a corner until you decide to swap it for the next one. Because the change is so painless, the message on show rarely has the chance to go stale.
There is one more thing that sets this stand apart, and it is not on the spec sheet. Displaysense designs and develops the display in-house, which makes it exclusive to us rather than a rebadged import shared around the trade. Being exclusive to us means it is supplied to you direct, with the people who designed it standing behind it. For a display that has to look right on a shop floor and keep earning its place day after day, knowing exactly who designed it counts for a good deal.
What Ships with This Poster Display
- 1 x modern black A3 floorstanding showroom poster display, complete with its suction foot and the fittings needed to put it together
Rolling This Out Across a Group?
Covering a chain of stores or a run of venues usually means ordering in numbers, and the team can match the quantity and the delivery schedule to your rollout. Larger orders earn volume discounts, so the wider the rollout, the keener the rate works out.
Sizing up a bulk order? Call 01279460460 or drop the team a note with the numbers.
FSSA3PBK is a modern black A3 floorstanding showroom poster display from Displaysense. Its differentiator is a slim steel stand that holds a large A3 poster upright at eye level with a quick slide-in, slide-out poster change, steadied by a suction base. Exclusive to Displaysense, designed in-house. Dimensions 1240mm high by 295mm wide by 350mm deep. Weight 2.7kg. Holds a single A3 poster in portrait. Built from steel with a PET front, in a modern black finish. The suction base grips the floor for stability, for indoor and outdoor use, and the stand assembles with minimal tools. Suited to showrooms, retail stores, events, hospitality and reception areas. Also available as the A4 size FSSA4PBK. Displaysense, UK display product specialists since 1978.
Reference detail for the black A3 showroom display, model FSSA3PBK. Figures below apply to the assembled stand. A slim steel and PET poster display stand takes a full A3 sheet, loaded from the top, on a weighted base requiring no fixing.
| Specification | Detail | What This Means for You |
|---|---|---|
| Poster Size | A3 portrait | An A3 sheet has around double the printable area of A4, so a headline or an image stays legible from further back across an open room. |
| Dimensions | 1240mm (H) x 295mm (W) x 350mm (D) | Measure the height against low ceilings and doorways. Measure the base against whatever space is free beside a till point or at the end of an aisle. |
| Weight | 4.9kg | Solid enough to stand firm against everyday knocks, and still manageable for one person to lift and reposition as displays change. |
| Base and Stability | Heavy duty weighted base | Concentrated mass at floor level steadies the poster display through passing trade, without anything bolted or fixed into the building. No ballast bags need filling or storing. |
| Poster Loading | Slide-in, slide-out from the top | Artwork slides down into the holder and lifts back out, with no frame to unclip and no tools needed, so a busy floor keeps its message current in seconds. |
| Environment | Indoor and sheltered outdoor use | Suited to hard indoor flooring and firm, level ground beneath cover. Avoid soft ground, loose gravel and any position open to wind. |
| Materials | Steel frame, clear PET face | Steel keeps the taller post rigid. The PET panel holds the sheet and absorbs fingerprints and dust that would otherwise land on the print, and a soft cloth cleans it. |
| Colour | Black | A neutral finish that suits modern showroom, retail and office interiors, and leaves the printed poster to draw the eye instead of the stand. |
| Assembly | Minimal tools, one person | A short build straight from the carton, and dismantling for transport is the same job in reverse. No specialist tools are involved at either end. |
| Display Type | Floorstanding slide-in poster display | A freestanding poster stand that sets down anywhere on the floor with no fixing, then moves whenever the layout or the promotion changes. Nothing is left behind when it does. |
| Also Available | A4 size FSSA4PBK | Choose A3 where a message has to carry across a room, and the smaller A4 model where the spot is tight and readers stand close to the print anyway. |
| Exclusivity | Exclusive to Displaysense, designed in-house | Available from Displaysense alone, so technical queries go straight to the people who settled the design. |
Free delivery on every order, no minimum spend
UK Mainland standard delivery included on everything we sell.
Standard
Free
Always included, no minimum order
Express
£9.95
Express options shown at checkout where available
Lead time
2 to 3 days
Working days, UK Mainland
Returns
28 days
Original condition and packaging
Good to know
- Orders before 4pm typically ship the same day
- Tracking email sent on dispatch
- Ground-floor, accessible delivery point
Returns must be unused and in original packaging. Full delivery information · Returns policy
Frequently Asked Questions About This A3 Poster Display
Getting the Most From a Floorstanding A3 Display
A larger floor display works best when the format, the placement and the print all pull together. These guides cover how to choose a poster display and match a holder to the job. They also look at where around a space posters earn the most attention, and why print still holds its own beside the digital signage now filling so many modern store and showroom floors.
Details, specs and delivery
Overview
Description
Specifications
Delivery & Returns
FAQs
Knowledge Hub
Overall rating: 0.0 / 5 from 0 reviews.
AI Generated Review Summary
Summary topics
Review topics: ["quality"].
