Overview
Description
Specifications
Delivery & Returns
FAQs
Knowledge Hub
Premium Double-Sided Aluminium Roller Banner Stand for 1000mm Wide Graphics
A single-sided roller banner has a back. A blank, branded-nothing reverse that half your audience sees as they approach from the wrong direction. In an exhibition hall, a reception lobby, a retail floor centre or any open-plan space where visitors move through from both sides, that blank back is wasted visibility on premium floor space. The TWRB1000 double-sided roller banner stand eliminates it. Two front-loading graphic rails. Two banner faces. Full branded visibility from every direction. Built on a patented aluminium front-loading rail system with a discreet cassette, a height-adjustable 18mm hybrid pole and a solid-core base engineered for stability in high-footfall venues.
This is the hardware-only stand. Graphics are ordered separately, which means you can source two different campaign messages for each side, or print matching graphics for consistent branding. Pair it with our 1000mm x 2000mm waterproof polypropylene banner print for gallery-grade output on 340gsm media at 1200 dpi.
Every Engineering Detail in the Double-Sided Stand
- Patented front-loading rail system: The graphic slides into a precision aluminium rail along the top of the stand, pulling the banner flat and straight across the full 1000mm width. No bowing, no wrinkles, no uneven tension. The rail holds the graphic under consistent pressure so it presents a perfectly flat surface from both directions. This is not a hook-and-hang system. It is a patented engineering solution for commercial display.
- Double-sided configuration: Two independent graphic rails, one on each face. Each side accepts a standard 1000mm wide banner up to 2100mm tall. You can run the same campaign on both sides for 360-degree brand consistency, or display two different messages to address traffic approaching from opposite directions.
- Discreet low-profile cassette: The cassette housing sits at floor level and is engineered to disappear visually. Audience attention stays on the graphics, not the hardware. In a professional exhibition environment, the difference between a visible mechanism and a hidden one is the difference between looking like a permanent installation and looking like a portable pop-up.
- 18mm hybrid bungee-telescopic pole: The support pole combines bungee tension with telescopic adjustment for height control from 1600mm to 2100mm. The bungee section absorbs vibration from passing foot traffic without transferring it to the graphics. The telescopic section locks at any height within the range, adapting the stand to different venues, ceiling heights and sightline requirements.
- Solid-core weighted base: A planted, heavy-gauge base that anchors the stand without bolt-down fixings or additional weights. In high-footfall exhibition halls where visitors brush past displays, bump into stands and drag bags across floors, the base keeps the unit vertical and stable without assistance.
- Aluminium construction throughout: Light enough for one person to carry between venues. Durable enough for years of repeated assembly, transport, exhibition use and storage. Aluminium will not corrode, warp or degrade between events.
- One-person, tool-free assembly: Pole sections connect, graphics slide into the front-loading rails, the unit stands. No tools. No instructions after the first setup. Assembly takes minutes, not sessions.
- Premium padded carry bag included: The stand, pole and base pack into a single padded bag for safe transport between venues, storage between campaigns and handover between team members. The bag protects the aluminium finish and the rail mechanism during transit.
- Graphics ordered separately: This is the hardware platform. You choose the print supplier, the media, the campaign timing and the message. Our 340gsm waterproof polypropylene banner prints are designed specifically for this stand. Two banners are required for double-sided use.
Open-Plan Environments Where Double-Sided Visibility Matters
| Exhibition Island Stands and Open Booths | Island stands have no back wall. Every visitor approaches from a different direction. A double-sided banner ensures your campaign graphic is the first thing each visitor sees, regardless of their approach angle. The patented rail keeps both faces perfectly flat under exhibition hall lighting. |
| Retail Floor Centres and Aisle-End Displays | Positioned mid-floor or at the end of an aisle, the stand captures attention from shoppers moving in both directions. Two different promotions can address two different customer flows. The discreet cassette lets the stand blend into the retail environment. |
| Hotel and Conference Centre Lobbies | Welcome signage and event branding positioned in the centre of a lobby where guests enter from multiple points. The height-adjustable pole adapts to different ceiling heights and sightline requirements across venues. |
| University Open Days and Recruitment Events | Departmental branding in halls and corridors where prospective students and families approach from both ends. Two sides means two messages: course information on one face, campus life on the other. |
| Car Showrooms and Dealership Reception Areas | Finance offers, model launches and brand campaigns displayed on a freestanding unit that customers walk around rather than past. The solid-core base handles the daily foot traffic of a busy showroom floor. |
| Corporate Events, AGMs and Investor Presentations | Sponsor branding, agenda displays and directional signage positioned where attendees circulate from multiple entry points. The premium aluminium finish and hidden cassette project the production values that corporate events demand. |
How to Set Up Your Double-Sided Display
- Extend the base and position the stand on a level surface.
- Connect the pole sections and adjust the telescopic height between 1600mm and 2100mm.
- Slide each banner graphic into the front-loading rail on its respective side. The patented rail pulls the graphic flat automatically.
One person. No tools. Assembly in minutes. The stand is ready to display the moment both graphics are loaded.
Need a Premium Double-Sided Roller Banner?
The TWRB1000G features a premium double-sided design with a front-loading rail system, adjustable height up to 2100mm and a solid weighted base for enhanced stability. Ideal for exhibitions, retail spaces and high-traffic promotional environments where visibility from both directions is essential.
Call us on 01279460460 or send us your requirements and we will help you choose the right display solution.
Displaysense TWRB1000 Premium Double-Sided Aluminium Front Loading Roller Banner Stand. Hardware-only, graphics ordered separately. Takes 2 x 1000mm wide banners up to 2100mm tall. Patented front-loading rail system for flat, wrinkle-free graphic presentation on both sides. Discreet low-profile cassette. 18mm hybrid bungee-telescopic pole adjustable 1600-2100mm. Solid-core weighted base for high-footfall stability. Aluminium construction. One-person tool-free assembly. Premium padded carry bag included. For open-plan exhibitions, retail floor centres, reception lobbies and any space where visitors approach from both directions. Compatible with Displaysense 1000mm x 2000mm waterproof polypropylene banners. Also available as TWRB1000G with printing included. Single-sided version: PRG1000. Displaysense, UK display specialists since 1978.
Consider the floor plan of any exhibition hall. Island stands sit in the centre of the space with traffic flowing around them from every direction. Aisle-end positions face two opposing flows. Reception lobbies have multiple entry points. In every one of these layouts, a single-sided banner stand presents your campaign to visitors approaching from one direction and a blank aluminium back to everyone else. You paid for the floor space. You paid for the graphic. Half your audience sees nothing. The double-sided stand exists to close that gap. Two graphic faces, one hardware unit, full visibility from every approach angle.
The patented front-loading rail is what separates this stand from lower-tier double-sided alternatives that use hook-on or clip-on attachment systems. Hook-on systems leave the graphic loose at the top edge, allowing it to bow outward, ripple in air-conditioned drafts and present an uneven surface that catches overhead lighting at different angles. The front-loading rail slides the banner into a precision channel that applies consistent tension across the full 1000mm width. Both faces sit perfectly flat. Both faces reflect light evenly. Both faces present a surface that looks engineered rather than assembled.
The discreet cassette is the other visible differentiator. Standard roller banner stands have a visible mechanism at the base: an exposed spring-loaded drum with a branded sticker and visible end caps. This stand hides the cassette behind a low-profile housing that sits at floor level and disappears from the viewer's sightline. The audience sees only the graphic and the slim aluminium pole. In an exhibition environment where first impressions determine which stands visitors approach, the hardware should be invisible. The message should be the only thing that registers.
This is the hardware investment. The aluminium frame, the patented rail, the solid-core base and the telescopic pole are built for years of repeated use across dozens of events and campaigns. Graphics are ordered separately because campaigns change and hardware does not. You can print two matching graphics for consistent branding on both sides, or print two different graphics for two different messages addressing two different audience flows. When the campaign ends, two new graphics slide into the same rails. The stand never needs replacing. Only the message does.
What Ships with the TWRB1000 Stand
- 1 x premium double-sided aluminium roller banner stand with patented front-loading rail system
- 1 x 18mm hybrid bungee-telescopic pole, adjustable 1600mm to 2100mm
- 1 x solid-core weighted base for freestanding stability in high-footfall environments
- 1 x premium padded carry bag for transport and storage
- Graphics NOT included (order two 1000mm wide banners separately)
Only Need One Graphic Face?
The PRG1000 single-sided stand uses the same patented front-loading rail, solid-core base and telescopic pole in a single-face configuration. Ideal for wall-adjacent positioning, booth-back displays and any layout where the stand has a wall behind it.
Call us on 01279460460 or send us your requirements and we will advise on single-sided or double-sided.
Displaysense TWRB1000 Premium Double-Sided Roller Banner Stand. Hardware only. Patented front-loading rail for flat wrinkle-free graphics on both faces. Discreet low-profile cassette hides mechanism from view. 18mm hybrid pole adjustable 1600-2100mm. Solid-core base. Aluminium. One-person assembly. Padded carry bag. Graphics ordered separately: two 1000mm wide banners required. Single-sided alternative: PRG1000. Complete kit with print: TWRB1000G. Displaysense, since 1978.
Full specifications for the TWRB1000 premium double-sided roller banner stand. Every component is chosen for commercial-grade durability, precision graphic presentation and the repeated assembly-transport-storage cycle that exhibition and event hardware demands.
| Specification | Detail | What This Means for You |
|---|---|---|
| Configuration | Double-sided (2 graphic faces) | Two independent front-loading rails, one on each face. Full branded visibility from every approach direction. No blank reverse. |
| Compatible Banner Size | 2 x 1000mm (W) x up to 2100mm (H) | Accepts two standard 1000mm wide banners. Same or different graphics on each face. Height adjustable from 1600mm to 2100mm. |
| Rail System | Patented front-loading aluminium | Graphic slides into a precision channel for consistent tension across the full width. Flat, wrinkle-free presentation without bowing, rippling or uneven edges. |
| Cassette | Discreet low-profile housing | Mechanism hidden at floor level. Audience sees only the graphic and the pole. Professional, permanent-installation appearance from a portable unit. |
| Pole | 18mm hybrid bungee-telescopic | Bungee section absorbs vibration from foot traffic. Telescopic section locks at any height between 1600mm and 2100mm. Adapts to different venues and ceiling heights. |
| Base | Solid-core weighted aluminium | Planted stability without bolt-down fixings or additional weights. Designed for high-footfall exhibition halls, retail floors and busy reception areas. |
| Material | Aluminium throughout | Corrosion-resistant, portable, commercially durable. Built for years of repeated assembly, transport and exhibition use. |
| End Caps | Black | Sleek, minimal end caps that do not distract from the graphic. Blend into any exhibition stand colour scheme. |
| Assembly | One person, no tools | Pole connects, graphics slide into rails, stand is ready. Minutes from bag to display. |
| Carry Bag | Premium padded bag included | Stand, pole and base pack into a single bag for safe transport between venues. Padded interior protects the aluminium finish and rail mechanism. |
| Graphics Included | No (hardware only) | Two 1000mm wide banners ordered separately. Allows independent graphic sourcing, different campaigns per side and replacement prints without new hardware. |
| Recommended Print | 340gsm waterproof polypropylene | Our 1000mm x 2000mm polypropylene banner at 1200 dpi delivers gallery-grade output calibrated for front-loading rail stands. |
| Single-Sided Alternative | PRG1000 | Same patented rail, pole and base in a single-face configuration for wall-adjacent and booth-back positioning. |
| Complete Kit Alternative | TWRB1000G (with printing) | This stand plus two custom-printed banner graphics included. The most cost-effective option for a first purchase with immediate print needs. |
| Delivery | Free UK mainland | Free standard delivery to UK Mainland Zone 1. Next working day available at checkout. |
Free delivery on every order, no minimum spend
UK Mainland standard delivery included on everything we sell.
Standard
Free
Always included, no minimum order
Express
£9.95
Express options shown at checkout where available
Lead time
2 to 3 days
Working days, UK Mainland
Returns
28 days
Original condition and packaging
Good to know
- Orders before 4pm typically ship the same day
- Tracking email sent on dispatch
- Ground-floor, accessible delivery point
Returns must be unused and in original packaging. Full delivery information · Returns policy
Double-Sided Roller Banner Stand: Your Questions Answered
Q: Are the printed graphics included with this stand?
A: No. This is the hardware-only stand. You order two 1000mm wide banner graphics separately, which gives you full control over the print supplier, media type, campaign timing and messaging. Our 1000mm x 2000mm waterproof polypropylene banner print is designed specifically for front-loading rail stands like this one.
Q: Why would I buy the hardware without print instead of a complete kit?
A: If you already have graphics from a previous event, if you want to source print from a specific supplier, or if you plan to change campaigns frequently and want to order replacement graphics on their own schedule. The hardware is a multi-year investment. The graphics are campaign-specific running costs. Separating the two gives you flexibility.
Q: What is the advantage of double-sided over single-sided?
A: Visibility from every direction. A single-sided stand has a blank reverse. In open-plan spaces where visitors approach from both sides, including exhibition islands, retail floor centres, reception lobbies and aisle ends, the blank back is wasted real estate. Double-sided captures attention from every approach angle on the same floor footprint.
Q: Can I display different graphics on each side?
A: Yes. Each face has its own independent front-loading rail. You can run the same graphic on both sides for consistent branding, or display two entirely different campaigns to address different audience flows from opposite directions.
Q: What does the patented front-loading rail actually do?
A: It slides the banner into a precision aluminium channel along the top of the stand, applying consistent tension across the full 1000mm width. The graphic hangs perfectly flat with no bowing, rippling or wrinkles. Lower-tier alternatives use hook-on or clip-on systems that leave the top edge loose, allowing the banner to distort under air conditioning or vibration.
Q: How does the height adjustment work?
A: The 18mm pole combines a bungee section with a telescopic section. The telescopic mechanism locks at any height between 1600mm and 2100mm. This lets you adapt the stand to different venues, ceiling heights and sightline requirements without changing the graphic.
Q: Is the base stable enough for a busy exhibition hall?
A: Yes. The solid-core weighted base anchors the stand without bolt-down fixings or additional sandbags. It is designed for high-footfall environments where visitors brush past, bump into stands and drag bags across floors. The bungee section of the pole absorbs vibration rather than transferring it to the graphics.
Q: How long does assembly take?
A: Minutes. One person, no tools. Extend the base, connect the pole sections, adjust the height and slide each graphic into its front-loading rail. After the first setup, the process becomes instinctive.
Q: What banner media works best with this stand?
A: Our 340gsm waterproof polypropylene banner is designed for front-loading rail stands. The 340gsm weight provides the rigidity for flat presentation, the anti-curl properties prevent edge-lifting and the satin finish diffuses exhibition lighting. Printed at 1200 dpi on an Epson photo-grade printer for gallery-grade output.
Q: Is the cassette visible to the audience?
A: Barely. The low-profile cassette housing sits at floor level and is engineered to disappear from the viewer's natural sightline. The audience sees the graphic and the slim aluminium pole. The mechanism that holds everything together stays out of sight.
Q: How does this stand transport between events?
A: The stand, pole and base pack into the included premium padded carry bag. One person carries it. The padded interior protects the aluminium finish and the patented rail mechanism during transit. Graphics travel separately or in the same bag depending on the media type.
Q: How many events will this stand last?
A: The aluminium construction, patented rail and solid-core base are built for years of commercial use. Dozens of events, hundreds of assemblies, thousands of visitor interactions. The hardware outlasts every campaign graphic you will ever load into it.
Q: Is there a single-sided version of this stand?
A: Yes. The PRG1000 uses the same patented front-loading rail, solid-core base and telescopic pole in a single-face configuration. Choose single-sided for wall-adjacent positioning or booth-back displays where only one face is visible. Choose double-sided for open-plan environments.
Q: What other widths are available?
A: The premium double-sided front-loading range is available in 800mm, 1000mm and 1200mm widths. All use the same patented rail system, hybrid pole and solid-core base. Choose the width that matches your floor space and visual impact requirements.
Exhibition Display, Event Branding and Stand Design Guides
The roller banner stand is the most portable display in any exhibition kit. How it presents your graphics, how it handles the traffic of a busy venue and whether it captures attention from every direction determine whether your stand works for you or against you. These guides cover exhibition strategy, event signage, in-store branding and customer experience.
Overview
Premium Double-Sided Aluminium Roller Banner Stand for 1000mm Wide Graphics
A single-sided roller banner has a back. A blank, branded-nothing reverse that half your audience sees as they approach from the wrong direction. In an exhibition hall, a reception lobby, a retail floor centre or any open-plan space where visitors move through from both sides, that blank back is wasted visibility on premium floor space. The TWRB1000 double-sided roller banner stand eliminates it. Two front-loading graphic rails. Two banner faces. Full branded visibility from every direction. Built on a patented aluminium front-loading rail system with a discreet cassette, a height-adjustable 18mm hybrid pole and a solid-core base engineered for stability in high-footfall venues.
This is the hardware-only stand. Graphics are ordered separately, which means you can source two different campaign messages for each side, or print matching graphics for consistent branding. Pair it with our 1000mm x 2000mm waterproof polypropylene banner print for gallery-grade output on 340gsm media at 1200 dpi.
Every Engineering Detail in the Double-Sided Stand
- Patented front-loading rail system: The graphic slides into a precision aluminium rail along the top of the stand, pulling the banner flat and straight across the full 1000mm width. No bowing, no wrinkles, no uneven tension. The rail holds the graphic under consistent pressure so it presents a perfectly flat surface from both directions. This is not a hook-and-hang system. It is a patented engineering solution for commercial display.
- Double-sided configuration: Two independent graphic rails, one on each face. Each side accepts a standard 1000mm wide banner up to 2100mm tall. You can run the same campaign on both sides for 360-degree brand consistency, or display two different messages to address traffic approaching from opposite directions.
- Discreet low-profile cassette: The cassette housing sits at floor level and is engineered to disappear visually. Audience attention stays on the graphics, not the hardware. In a professional exhibition environment, the difference between a visible mechanism and a hidden one is the difference between looking like a permanent installation and looking like a portable pop-up.
- 18mm hybrid bungee-telescopic pole: The support pole combines bungee tension with telescopic adjustment for height control from 1600mm to 2100mm. The bungee section absorbs vibration from passing foot traffic without transferring it to the graphics. The telescopic section locks at any height within the range, adapting the stand to different venues, ceiling heights and sightline requirements.
- Solid-core weighted base: A planted, heavy-gauge base that anchors the stand without bolt-down fixings or additional weights. In high-footfall exhibition halls where visitors brush past displays, bump into stands and drag bags across floors, the base keeps the unit vertical and stable without assistance.
- Aluminium construction throughout: Light enough for one person to carry between venues. Durable enough for years of repeated assembly, transport, exhibition use and storage. Aluminium will not corrode, warp or degrade between events.
- One-person, tool-free assembly: Pole sections connect, graphics slide into the front-loading rails, the unit stands. No tools. No instructions after the first setup. Assembly takes minutes, not sessions.
- Premium padded carry bag included: The stand, pole and base pack into a single padded bag for safe transport between venues, storage between campaigns and handover between team members. The bag protects the aluminium finish and the rail mechanism during transit.
- Graphics ordered separately: This is the hardware platform. You choose the print supplier, the media, the campaign timing and the message. Our 340gsm waterproof polypropylene banner prints are designed specifically for this stand. Two banners are required for double-sided use.
Open-Plan Environments Where Double-Sided Visibility Matters
| Exhibition Island Stands and Open Booths | Island stands have no back wall. Every visitor approaches from a different direction. A double-sided banner ensures your campaign graphic is the first thing each visitor sees, regardless of their approach angle. The patented rail keeps both faces perfectly flat under exhibition hall lighting. |
| Retail Floor Centres and Aisle-End Displays | Positioned mid-floor or at the end of an aisle, the stand captures attention from shoppers moving in both directions. Two different promotions can address two different customer flows. The discreet cassette lets the stand blend into the retail environment. |
| Hotel and Conference Centre Lobbies | Welcome signage and event branding positioned in the centre of a lobby where guests enter from multiple points. The height-adjustable pole adapts to different ceiling heights and sightline requirements across venues. |
| University Open Days and Recruitment Events | Departmental branding in halls and corridors where prospective students and families approach from both ends. Two sides means two messages: course information on one face, campus life on the other. |
| Car Showrooms and Dealership Reception Areas | Finance offers, model launches and brand campaigns displayed on a freestanding unit that customers walk around rather than past. The solid-core base handles the daily foot traffic of a busy showroom floor. |
| Corporate Events, AGMs and Investor Presentations | Sponsor branding, agenda displays and directional signage positioned where attendees circulate from multiple entry points. The premium aluminium finish and hidden cassette project the production values that corporate events demand. |
How to Set Up Your Double-Sided Display
- Extend the base and position the stand on a level surface.
- Connect the pole sections and adjust the telescopic height between 1600mm and 2100mm.
- Slide each banner graphic into the front-loading rail on its respective side. The patented rail pulls the graphic flat automatically.
One person. No tools. Assembly in minutes. The stand is ready to display the moment both graphics are loaded.
Need a Premium Double-Sided Roller Banner?
The TWRB1000G features a premium double-sided design with a front-loading rail system, adjustable height up to 2100mm and a solid weighted base for enhanced stability. Ideal for exhibitions, retail spaces and high-traffic promotional environments where visibility from both directions is essential.
Call us on 01279460460 or send us your requirements and we will help you choose the right display solution.
Displaysense TWRB1000 Premium Double-Sided Aluminium Front Loading Roller Banner Stand. Hardware-only, graphics ordered separately. Takes 2 x 1000mm wide banners up to 2100mm tall. Patented front-loading rail system for flat, wrinkle-free graphic presentation on both sides. Discreet low-profile cassette. 18mm hybrid bungee-telescopic pole adjustable 1600-2100mm. Solid-core weighted base for high-footfall stability. Aluminium construction. One-person tool-free assembly. Premium padded carry bag included. For open-plan exhibitions, retail floor centres, reception lobbies and any space where visitors approach from both directions. Compatible with Displaysense 1000mm x 2000mm waterproof polypropylene banners. Also available as TWRB1000G with printing included. Single-sided version: PRG1000. Displaysense, UK display specialists since 1978.
Description
Consider the floor plan of any exhibition hall. Island stands sit in the centre of the space with traffic flowing around them from every direction. Aisle-end positions face two opposing flows. Reception lobbies have multiple entry points. In every one of these layouts, a single-sided banner stand presents your campaign to visitors approaching from one direction and a blank aluminium back to everyone else. You paid for the floor space. You paid for the graphic. Half your audience sees nothing. The double-sided stand exists to close that gap. Two graphic faces, one hardware unit, full visibility from every approach angle.
The patented front-loading rail is what separates this stand from lower-tier double-sided alternatives that use hook-on or clip-on attachment systems. Hook-on systems leave the graphic loose at the top edge, allowing it to bow outward, ripple in air-conditioned drafts and present an uneven surface that catches overhead lighting at different angles. The front-loading rail slides the banner into a precision channel that applies consistent tension across the full 1000mm width. Both faces sit perfectly flat. Both faces reflect light evenly. Both faces present a surface that looks engineered rather than assembled.
The discreet cassette is the other visible differentiator. Standard roller banner stands have a visible mechanism at the base: an exposed spring-loaded drum with a branded sticker and visible end caps. This stand hides the cassette behind a low-profile housing that sits at floor level and disappears from the viewer's sightline. The audience sees only the graphic and the slim aluminium pole. In an exhibition environment where first impressions determine which stands visitors approach, the hardware should be invisible. The message should be the only thing that registers.
This is the hardware investment. The aluminium frame, the patented rail, the solid-core base and the telescopic pole are built for years of repeated use across dozens of events and campaigns. Graphics are ordered separately because campaigns change and hardware does not. You can print two matching graphics for consistent branding on both sides, or print two different graphics for two different messages addressing two different audience flows. When the campaign ends, two new graphics slide into the same rails. The stand never needs replacing. Only the message does.
What Ships with the TWRB1000 Stand
- 1 x premium double-sided aluminium roller banner stand with patented front-loading rail system
- 1 x 18mm hybrid bungee-telescopic pole, adjustable 1600mm to 2100mm
- 1 x solid-core weighted base for freestanding stability in high-footfall environments
- 1 x premium padded carry bag for transport and storage
- Graphics NOT included (order two 1000mm wide banners separately)
Only Need One Graphic Face?
The PRG1000 single-sided stand uses the same patented front-loading rail, solid-core base and telescopic pole in a single-face configuration. Ideal for wall-adjacent positioning, booth-back displays and any layout where the stand has a wall behind it.
Call us on 01279460460 or send us your requirements and we will advise on single-sided or double-sided.
Displaysense TWRB1000 Premium Double-Sided Roller Banner Stand. Hardware only. Patented front-loading rail for flat wrinkle-free graphics on both faces. Discreet low-profile cassette hides mechanism from view. 18mm hybrid pole adjustable 1600-2100mm. Solid-core base. Aluminium. One-person assembly. Padded carry bag. Graphics ordered separately: two 1000mm wide banners required. Single-sided alternative: PRG1000. Complete kit with print: TWRB1000G. Displaysense, since 1978.
Specifications
Full specifications for the TWRB1000 premium double-sided roller banner stand. Every component is chosen for commercial-grade durability, precision graphic presentation and the repeated assembly-transport-storage cycle that exhibition and event hardware demands.
| Specification | Detail | What This Means for You |
|---|---|---|
| Configuration | Double-sided (2 graphic faces) | Two independent front-loading rails, one on each face. Full branded visibility from every approach direction. No blank reverse. |
| Compatible Banner Size | 2 x 1000mm (W) x up to 2100mm (H) | Accepts two standard 1000mm wide banners. Same or different graphics on each face. Height adjustable from 1600mm to 2100mm. |
| Rail System | Patented front-loading aluminium | Graphic slides into a precision channel for consistent tension across the full width. Flat, wrinkle-free presentation without bowing, rippling or uneven edges. |
| Cassette | Discreet low-profile housing | Mechanism hidden at floor level. Audience sees only the graphic and the pole. Professional, permanent-installation appearance from a portable unit. |
| Pole | 18mm hybrid bungee-telescopic | Bungee section absorbs vibration from foot traffic. Telescopic section locks at any height between 1600mm and 2100mm. Adapts to different venues and ceiling heights. |
| Base | Solid-core weighted aluminium | Planted stability without bolt-down fixings or additional weights. Designed for high-footfall exhibition halls, retail floors and busy reception areas. |
| Material | Aluminium throughout | Corrosion-resistant, portable, commercially durable. Built for years of repeated assembly, transport and exhibition use. |
| End Caps | Black | Sleek, minimal end caps that do not distract from the graphic. Blend into any exhibition stand colour scheme. |
| Assembly | One person, no tools | Pole connects, graphics slide into rails, stand is ready. Minutes from bag to display. |
| Carry Bag | Premium padded bag included | Stand, pole and base pack into a single bag for safe transport between venues. Padded interior protects the aluminium finish and rail mechanism. |
| Graphics Included | No (hardware only) | Two 1000mm wide banners ordered separately. Allows independent graphic sourcing, different campaigns per side and replacement prints without new hardware. |
| Recommended Print | 340gsm waterproof polypropylene | Our 1000mm x 2000mm polypropylene banner at 1200 dpi delivers gallery-grade output calibrated for front-loading rail stands. |
| Single-Sided Alternative | PRG1000 | Same patented rail, pole and base in a single-face configuration for wall-adjacent and booth-back positioning. |
| Complete Kit Alternative | TWRB1000G (with printing) | This stand plus two custom-printed banner graphics included. The most cost-effective option for a first purchase with immediate print needs. |
| Delivery | Free UK mainland | Free standard delivery to UK Mainland Zone 1. Next working day available at checkout. |
Delivery & Returns
Free delivery on every order, no minimum spend
UK Mainland standard delivery included on everything we sell.
Standard
Free
Always included, no minimum order
Express
£9.95
Express options shown at checkout where available
Lead time
2 to 3 days
Working days, UK Mainland
Returns
28 days
Original condition and packaging
Good to know
- Orders before 4pm typically ship the same day
- Tracking email sent on dispatch
- Ground-floor, accessible delivery point
Returns must be unused and in original packaging. Full delivery information · Returns policy
FAQs
Double-Sided Roller Banner Stand: Your Questions Answered
Q: Are the printed graphics included with this stand?
A: No. This is the hardware-only stand. You order two 1000mm wide banner graphics separately, which gives you full control over the print supplier, media type, campaign timing and messaging. Our 1000mm x 2000mm waterproof polypropylene banner print is designed specifically for front-loading rail stands like this one.
Q: Why would I buy the hardware without print instead of a complete kit?
A: If you already have graphics from a previous event, if you want to source print from a specific supplier, or if you plan to change campaigns frequently and want to order replacement graphics on their own schedule. The hardware is a multi-year investment. The graphics are campaign-specific running costs. Separating the two gives you flexibility.
Q: What is the advantage of double-sided over single-sided?
A: Visibility from every direction. A single-sided stand has a blank reverse. In open-plan spaces where visitors approach from both sides, including exhibition islands, retail floor centres, reception lobbies and aisle ends, the blank back is wasted real estate. Double-sided captures attention from every approach angle on the same floor footprint.
Q: Can I display different graphics on each side?
A: Yes. Each face has its own independent front-loading rail. You can run the same graphic on both sides for consistent branding, or display two entirely different campaigns to address different audience flows from opposite directions.
Q: What does the patented front-loading rail actually do?
A: It slides the banner into a precision aluminium channel along the top of the stand, applying consistent tension across the full 1000mm width. The graphic hangs perfectly flat with no bowing, rippling or wrinkles. Lower-tier alternatives use hook-on or clip-on systems that leave the top edge loose, allowing the banner to distort under air conditioning or vibration.
Q: How does the height adjustment work?
A: The 18mm pole combines a bungee section with a telescopic section. The telescopic mechanism locks at any height between 1600mm and 2100mm. This lets you adapt the stand to different venues, ceiling heights and sightline requirements without changing the graphic.
Q: Is the base stable enough for a busy exhibition hall?
A: Yes. The solid-core weighted base anchors the stand without bolt-down fixings or additional sandbags. It is designed for high-footfall environments where visitors brush past, bump into stands and drag bags across floors. The bungee section of the pole absorbs vibration rather than transferring it to the graphics.
Q: How long does assembly take?
A: Minutes. One person, no tools. Extend the base, connect the pole sections, adjust the height and slide each graphic into its front-loading rail. After the first setup, the process becomes instinctive.
Q: What banner media works best with this stand?
A: Our 340gsm waterproof polypropylene banner is designed for front-loading rail stands. The 340gsm weight provides the rigidity for flat presentation, the anti-curl properties prevent edge-lifting and the satin finish diffuses exhibition lighting. Printed at 1200 dpi on an Epson photo-grade printer for gallery-grade output.
Q: Is the cassette visible to the audience?
A: Barely. The low-profile cassette housing sits at floor level and is engineered to disappear from the viewer's natural sightline. The audience sees the graphic and the slim aluminium pole. The mechanism that holds everything together stays out of sight.
Q: How does this stand transport between events?
A: The stand, pole and base pack into the included premium padded carry bag. One person carries it. The padded interior protects the aluminium finish and the patented rail mechanism during transit. Graphics travel separately or in the same bag depending on the media type.
Q: How many events will this stand last?
A: The aluminium construction, patented rail and solid-core base are built for years of commercial use. Dozens of events, hundreds of assemblies, thousands of visitor interactions. The hardware outlasts every campaign graphic you will ever load into it.
Q: Is there a single-sided version of this stand?
A: Yes. The PRG1000 uses the same patented front-loading rail, solid-core base and telescopic pole in a single-face configuration. Choose single-sided for wall-adjacent positioning or booth-back displays where only one face is visible. Choose double-sided for open-plan environments.
Q: What other widths are available?
A: The premium double-sided front-loading range is available in 800mm, 1000mm and 1200mm widths. All use the same patented rail system, hybrid pole and solid-core base. Choose the width that matches your floor space and visual impact requirements.
Knowledge Hub
Exhibition Display, Event Branding and Stand Design Guides
The roller banner stand is the most portable display in any exhibition kit. How it presents your graphics, how it handles the traffic of a busy venue and whether it captures attention from every direction determine whether your stand works for you or against you. These guides cover exhibition strategy, event signage, in-store branding and customer experience.
Premium Double Sided Aluminium Front Loading Roller Banner Stand for 2100mm High x 1000mm Wide Banners
| Quantity | Discount | Save |
|---|---|---|
| 1 - 9 | 0% off | £0.00 |
| 10 - 24 | 5% off | £5.80 |
| 25 + | 8% off | £9.28 |
Level Up Your Display – Add Now
Portable A4 Floor Standing Aluminium Zig Zag Brochure Stand 275mm Wide x 1540mm High - Protective Aluminium Case Included
£84.00
(Inc VAT)
£96.67
(Exc VAT)
Overview
Description
Specifications
Delivery & Returns
FAQs
Knowledge Hub
Premium Double-Sided Aluminium Roller Banner Stand for 1000mm Wide Graphics
A single-sided roller banner has a back. A blank, branded-nothing reverse that half your audience sees as they approach from the wrong direction. In an exhibition hall, a reception lobby, a retail floor centre or any open-plan space where visitors move through from both sides, that blank back is wasted visibility on premium floor space. The TWRB1000 double-sided roller banner stand eliminates it. Two front-loading graphic rails. Two banner faces. Full branded visibility from every direction. Built on a patented aluminium front-loading rail system with a discreet cassette, a height-adjustable 18mm hybrid pole and a solid-core base engineered for stability in high-footfall venues.
This is the hardware-only stand. Graphics are ordered separately, which means you can source two different campaign messages for each side, or print matching graphics for consistent branding. Pair it with our 1000mm x 2000mm waterproof polypropylene banner print for gallery-grade output on 340gsm media at 1200 dpi.
Every Engineering Detail in the Double-Sided Stand
- Patented front-loading rail system: The graphic slides into a precision aluminium rail along the top of the stand, pulling the banner flat and straight across the full 1000mm width. No bowing, no wrinkles, no uneven tension. The rail holds the graphic under consistent pressure so it presents a perfectly flat surface from both directions. This is not a hook-and-hang system. It is a patented engineering solution for commercial display.
- Double-sided configuration: Two independent graphic rails, one on each face. Each side accepts a standard 1000mm wide banner up to 2100mm tall. You can run the same campaign on both sides for 360-degree brand consistency, or display two different messages to address traffic approaching from opposite directions.
- Discreet low-profile cassette: The cassette housing sits at floor level and is engineered to disappear visually. Audience attention stays on the graphics, not the hardware. In a professional exhibition environment, the difference between a visible mechanism and a hidden one is the difference between looking like a permanent installation and looking like a portable pop-up.
- 18mm hybrid bungee-telescopic pole: The support pole combines bungee tension with telescopic adjustment for height control from 1600mm to 2100mm. The bungee section absorbs vibration from passing foot traffic without transferring it to the graphics. The telescopic section locks at any height within the range, adapting the stand to different venues, ceiling heights and sightline requirements.
- Solid-core weighted base: A planted, heavy-gauge base that anchors the stand without bolt-down fixings or additional weights. In high-footfall exhibition halls where visitors brush past displays, bump into stands and drag bags across floors, the base keeps the unit vertical and stable without assistance.
- Aluminium construction throughout: Light enough for one person to carry between venues. Durable enough for years of repeated assembly, transport, exhibition use and storage. Aluminium will not corrode, warp or degrade between events.
- One-person, tool-free assembly: Pole sections connect, graphics slide into the front-loading rails, the unit stands. No tools. No instructions after the first setup. Assembly takes minutes, not sessions.
- Premium padded carry bag included: The stand, pole and base pack into a single padded bag for safe transport between venues, storage between campaigns and handover between team members. The bag protects the aluminium finish and the rail mechanism during transit.
- Graphics ordered separately: This is the hardware platform. You choose the print supplier, the media, the campaign timing and the message. Our 340gsm waterproof polypropylene banner prints are designed specifically for this stand. Two banners are required for double-sided use.
Open-Plan Environments Where Double-Sided Visibility Matters
| Exhibition Island Stands and Open Booths | Island stands have no back wall. Every visitor approaches from a different direction. A double-sided banner ensures your campaign graphic is the first thing each visitor sees, regardless of their approach angle. The patented rail keeps both faces perfectly flat under exhibition hall lighting. |
| Retail Floor Centres and Aisle-End Displays | Positioned mid-floor or at the end of an aisle, the stand captures attention from shoppers moving in both directions. Two different promotions can address two different customer flows. The discreet cassette lets the stand blend into the retail environment. |
| Hotel and Conference Centre Lobbies | Welcome signage and event branding positioned in the centre of a lobby where guests enter from multiple points. The height-adjustable pole adapts to different ceiling heights and sightline requirements across venues. |
| University Open Days and Recruitment Events | Departmental branding in halls and corridors where prospective students and families approach from both ends. Two sides means two messages: course information on one face, campus life on the other. |
| Car Showrooms and Dealership Reception Areas | Finance offers, model launches and brand campaigns displayed on a freestanding unit that customers walk around rather than past. The solid-core base handles the daily foot traffic of a busy showroom floor. |
| Corporate Events, AGMs and Investor Presentations | Sponsor branding, agenda displays and directional signage positioned where attendees circulate from multiple entry points. The premium aluminium finish and hidden cassette project the production values that corporate events demand. |
How to Set Up Your Double-Sided Display
- Extend the base and position the stand on a level surface.
- Connect the pole sections and adjust the telescopic height between 1600mm and 2100mm.
- Slide each banner graphic into the front-loading rail on its respective side. The patented rail pulls the graphic flat automatically.
One person. No tools. Assembly in minutes. The stand is ready to display the moment both graphics are loaded.
Need a Premium Double-Sided Roller Banner?
The TWRB1000G features a premium double-sided design with a front-loading rail system, adjustable height up to 2100mm and a solid weighted base for enhanced stability. Ideal for exhibitions, retail spaces and high-traffic promotional environments where visibility from both directions is essential.
Call us on 01279460460 or send us your requirements and we will help you choose the right display solution.
Displaysense TWRB1000 Premium Double-Sided Aluminium Front Loading Roller Banner Stand. Hardware-only, graphics ordered separately. Takes 2 x 1000mm wide banners up to 2100mm tall. Patented front-loading rail system for flat, wrinkle-free graphic presentation on both sides. Discreet low-profile cassette. 18mm hybrid bungee-telescopic pole adjustable 1600-2100mm. Solid-core weighted base for high-footfall stability. Aluminium construction. One-person tool-free assembly. Premium padded carry bag included. For open-plan exhibitions, retail floor centres, reception lobbies and any space where visitors approach from both directions. Compatible with Displaysense 1000mm x 2000mm waterproof polypropylene banners. Also available as TWRB1000G with printing included. Single-sided version: PRG1000. Displaysense, UK display specialists since 1978.
Consider the floor plan of any exhibition hall. Island stands sit in the centre of the space with traffic flowing around them from every direction. Aisle-end positions face two opposing flows. Reception lobbies have multiple entry points. In every one of these layouts, a single-sided banner stand presents your campaign to visitors approaching from one direction and a blank aluminium back to everyone else. You paid for the floor space. You paid for the graphic. Half your audience sees nothing. The double-sided stand exists to close that gap. Two graphic faces, one hardware unit, full visibility from every approach angle.
The patented front-loading rail is what separates this stand from lower-tier double-sided alternatives that use hook-on or clip-on attachment systems. Hook-on systems leave the graphic loose at the top edge, allowing it to bow outward, ripple in air-conditioned drafts and present an uneven surface that catches overhead lighting at different angles. The front-loading rail slides the banner into a precision channel that applies consistent tension across the full 1000mm width. Both faces sit perfectly flat. Both faces reflect light evenly. Both faces present a surface that looks engineered rather than assembled.
The discreet cassette is the other visible differentiator. Standard roller banner stands have a visible mechanism at the base: an exposed spring-loaded drum with a branded sticker and visible end caps. This stand hides the cassette behind a low-profile housing that sits at floor level and disappears from the viewer's sightline. The audience sees only the graphic and the slim aluminium pole. In an exhibition environment where first impressions determine which stands visitors approach, the hardware should be invisible. The message should be the only thing that registers.
This is the hardware investment. The aluminium frame, the patented rail, the solid-core base and the telescopic pole are built for years of repeated use across dozens of events and campaigns. Graphics are ordered separately because campaigns change and hardware does not. You can print two matching graphics for consistent branding on both sides, or print two different graphics for two different messages addressing two different audience flows. When the campaign ends, two new graphics slide into the same rails. The stand never needs replacing. Only the message does.
What Ships with the TWRB1000 Stand
- 1 x premium double-sided aluminium roller banner stand with patented front-loading rail system
- 1 x 18mm hybrid bungee-telescopic pole, adjustable 1600mm to 2100mm
- 1 x solid-core weighted base for freestanding stability in high-footfall environments
- 1 x premium padded carry bag for transport and storage
- Graphics NOT included (order two 1000mm wide banners separately)
Only Need One Graphic Face?
The PRG1000 single-sided stand uses the same patented front-loading rail, solid-core base and telescopic pole in a single-face configuration. Ideal for wall-adjacent positioning, booth-back displays and any layout where the stand has a wall behind it.
Call us on 01279460460 or send us your requirements and we will advise on single-sided or double-sided.
Displaysense TWRB1000 Premium Double-Sided Roller Banner Stand. Hardware only. Patented front-loading rail for flat wrinkle-free graphics on both faces. Discreet low-profile cassette hides mechanism from view. 18mm hybrid pole adjustable 1600-2100mm. Solid-core base. Aluminium. One-person assembly. Padded carry bag. Graphics ordered separately: two 1000mm wide banners required. Single-sided alternative: PRG1000. Complete kit with print: TWRB1000G. Displaysense, since 1978.
Full specifications for the TWRB1000 premium double-sided roller banner stand. Every component is chosen for commercial-grade durability, precision graphic presentation and the repeated assembly-transport-storage cycle that exhibition and event hardware demands.
| Specification | Detail | What This Means for You |
|---|---|---|
| Configuration | Double-sided (2 graphic faces) | Two independent front-loading rails, one on each face. Full branded visibility from every approach direction. No blank reverse. |
| Compatible Banner Size | 2 x 1000mm (W) x up to 2100mm (H) | Accepts two standard 1000mm wide banners. Same or different graphics on each face. Height adjustable from 1600mm to 2100mm. |
| Rail System | Patented front-loading aluminium | Graphic slides into a precision channel for consistent tension across the full width. Flat, wrinkle-free presentation without bowing, rippling or uneven edges. |
| Cassette | Discreet low-profile housing | Mechanism hidden at floor level. Audience sees only the graphic and the pole. Professional, permanent-installation appearance from a portable unit. |
| Pole | 18mm hybrid bungee-telescopic | Bungee section absorbs vibration from foot traffic. Telescopic section locks at any height between 1600mm and 2100mm. Adapts to different venues and ceiling heights. |
| Base | Solid-core weighted aluminium | Planted stability without bolt-down fixings or additional weights. Designed for high-footfall exhibition halls, retail floors and busy reception areas. |
| Material | Aluminium throughout | Corrosion-resistant, portable, commercially durable. Built for years of repeated assembly, transport and exhibition use. |
| End Caps | Black | Sleek, minimal end caps that do not distract from the graphic. Blend into any exhibition stand colour scheme. |
| Assembly | One person, no tools | Pole connects, graphics slide into rails, stand is ready. Minutes from bag to display. |
| Carry Bag | Premium padded bag included | Stand, pole and base pack into a single bag for safe transport between venues. Padded interior protects the aluminium finish and rail mechanism. |
| Graphics Included | No (hardware only) | Two 1000mm wide banners ordered separately. Allows independent graphic sourcing, different campaigns per side and replacement prints without new hardware. |
| Recommended Print | 340gsm waterproof polypropylene | Our 1000mm x 2000mm polypropylene banner at 1200 dpi delivers gallery-grade output calibrated for front-loading rail stands. |
| Single-Sided Alternative | PRG1000 | Same patented rail, pole and base in a single-face configuration for wall-adjacent and booth-back positioning. |
| Complete Kit Alternative | TWRB1000G (with printing) | This stand plus two custom-printed banner graphics included. The most cost-effective option for a first purchase with immediate print needs. |
| Delivery | Free UK mainland | Free standard delivery to UK Mainland Zone 1. Next working day available at checkout. |
Free delivery on every order, no minimum spend
UK Mainland standard delivery included on everything we sell.
Standard
Free
Always included, no minimum order
Express
£9.95
Express options shown at checkout where available
Lead time
2 to 3 days
Working days, UK Mainland
Returns
28 days
Original condition and packaging
Good to know
- Orders before 4pm typically ship the same day
- Tracking email sent on dispatch
- Ground-floor, accessible delivery point
Returns must be unused and in original packaging. Full delivery information · Returns policy
Double-Sided Roller Banner Stand: Your Questions Answered
Q: Are the printed graphics included with this stand?
A: No. This is the hardware-only stand. You order two 1000mm wide banner graphics separately, which gives you full control over the print supplier, media type, campaign timing and messaging. Our 1000mm x 2000mm waterproof polypropylene banner print is designed specifically for front-loading rail stands like this one.
Q: Why would I buy the hardware without print instead of a complete kit?
A: If you already have graphics from a previous event, if you want to source print from a specific supplier, or if you plan to change campaigns frequently and want to order replacement graphics on their own schedule. The hardware is a multi-year investment. The graphics are campaign-specific running costs. Separating the two gives you flexibility.
Q: What is the advantage of double-sided over single-sided?
A: Visibility from every direction. A single-sided stand has a blank reverse. In open-plan spaces where visitors approach from both sides, including exhibition islands, retail floor centres, reception lobbies and aisle ends, the blank back is wasted real estate. Double-sided captures attention from every approach angle on the same floor footprint.
Q: Can I display different graphics on each side?
A: Yes. Each face has its own independent front-loading rail. You can run the same graphic on both sides for consistent branding, or display two entirely different campaigns to address different audience flows from opposite directions.
Q: What does the patented front-loading rail actually do?
A: It slides the banner into a precision aluminium channel along the top of the stand, applying consistent tension across the full 1000mm width. The graphic hangs perfectly flat with no bowing, rippling or wrinkles. Lower-tier alternatives use hook-on or clip-on systems that leave the top edge loose, allowing the banner to distort under air conditioning or vibration.
Q: How does the height adjustment work?
A: The 18mm pole combines a bungee section with a telescopic section. The telescopic mechanism locks at any height between 1600mm and 2100mm. This lets you adapt the stand to different venues, ceiling heights and sightline requirements without changing the graphic.
Q: Is the base stable enough for a busy exhibition hall?
A: Yes. The solid-core weighted base anchors the stand without bolt-down fixings or additional sandbags. It is designed for high-footfall environments where visitors brush past, bump into stands and drag bags across floors. The bungee section of the pole absorbs vibration rather than transferring it to the graphics.
Q: How long does assembly take?
A: Minutes. One person, no tools. Extend the base, connect the pole sections, adjust the height and slide each graphic into its front-loading rail. After the first setup, the process becomes instinctive.
Q: What banner media works best with this stand?
A: Our 340gsm waterproof polypropylene banner is designed for front-loading rail stands. The 340gsm weight provides the rigidity for flat presentation, the anti-curl properties prevent edge-lifting and the satin finish diffuses exhibition lighting. Printed at 1200 dpi on an Epson photo-grade printer for gallery-grade output.
Q: Is the cassette visible to the audience?
A: Barely. The low-profile cassette housing sits at floor level and is engineered to disappear from the viewer's natural sightline. The audience sees the graphic and the slim aluminium pole. The mechanism that holds everything together stays out of sight.
Q: How does this stand transport between events?
A: The stand, pole and base pack into the included premium padded carry bag. One person carries it. The padded interior protects the aluminium finish and the patented rail mechanism during transit. Graphics travel separately or in the same bag depending on the media type.
Q: How many events will this stand last?
A: The aluminium construction, patented rail and solid-core base are built for years of commercial use. Dozens of events, hundreds of assemblies, thousands of visitor interactions. The hardware outlasts every campaign graphic you will ever load into it.
Q: Is there a single-sided version of this stand?
A: Yes. The PRG1000 uses the same patented front-loading rail, solid-core base and telescopic pole in a single-face configuration. Choose single-sided for wall-adjacent positioning or booth-back displays where only one face is visible. Choose double-sided for open-plan environments.
Q: What other widths are available?
A: The premium double-sided front-loading range is available in 800mm, 1000mm and 1200mm widths. All use the same patented rail system, hybrid pole and solid-core base. Choose the width that matches your floor space and visual impact requirements.
Exhibition Display, Event Branding and Stand Design Guides
The roller banner stand is the most portable display in any exhibition kit. How it presents your graphics, how it handles the traffic of a busy venue and whether it captures attention from every direction determine whether your stand works for you or against you. These guides cover exhibition strategy, event signage, in-store branding and customer experience.
Overview
Premium Double-Sided Aluminium Roller Banner Stand for 1000mm Wide Graphics
A single-sided roller banner has a back. A blank, branded-nothing reverse that half your audience sees as they approach from the wrong direction. In an exhibition hall, a reception lobby, a retail floor centre or any open-plan space where visitors move through from both sides, that blank back is wasted visibility on premium floor space. The TWRB1000 double-sided roller banner stand eliminates it. Two front-loading graphic rails. Two banner faces. Full branded visibility from every direction. Built on a patented aluminium front-loading rail system with a discreet cassette, a height-adjustable 18mm hybrid pole and a solid-core base engineered for stability in high-footfall venues.
This is the hardware-only stand. Graphics are ordered separately, which means you can source two different campaign messages for each side, or print matching graphics for consistent branding. Pair it with our 1000mm x 2000mm waterproof polypropylene banner print for gallery-grade output on 340gsm media at 1200 dpi.
Every Engineering Detail in the Double-Sided Stand
- Patented front-loading rail system: The graphic slides into a precision aluminium rail along the top of the stand, pulling the banner flat and straight across the full 1000mm width. No bowing, no wrinkles, no uneven tension. The rail holds the graphic under consistent pressure so it presents a perfectly flat surface from both directions. This is not a hook-and-hang system. It is a patented engineering solution for commercial display.
- Double-sided configuration: Two independent graphic rails, one on each face. Each side accepts a standard 1000mm wide banner up to 2100mm tall. You can run the same campaign on both sides for 360-degree brand consistency, or display two different messages to address traffic approaching from opposite directions.
- Discreet low-profile cassette: The cassette housing sits at floor level and is engineered to disappear visually. Audience attention stays on the graphics, not the hardware. In a professional exhibition environment, the difference between a visible mechanism and a hidden one is the difference between looking like a permanent installation and looking like a portable pop-up.
- 18mm hybrid bungee-telescopic pole: The support pole combines bungee tension with telescopic adjustment for height control from 1600mm to 2100mm. The bungee section absorbs vibration from passing foot traffic without transferring it to the graphics. The telescopic section locks at any height within the range, adapting the stand to different venues, ceiling heights and sightline requirements.
- Solid-core weighted base: A planted, heavy-gauge base that anchors the stand without bolt-down fixings or additional weights. In high-footfall exhibition halls where visitors brush past displays, bump into stands and drag bags across floors, the base keeps the unit vertical and stable without assistance.
- Aluminium construction throughout: Light enough for one person to carry between venues. Durable enough for years of repeated assembly, transport, exhibition use and storage. Aluminium will not corrode, warp or degrade between events.
- One-person, tool-free assembly: Pole sections connect, graphics slide into the front-loading rails, the unit stands. No tools. No instructions after the first setup. Assembly takes minutes, not sessions.
- Premium padded carry bag included: The stand, pole and base pack into a single padded bag for safe transport between venues, storage between campaigns and handover between team members. The bag protects the aluminium finish and the rail mechanism during transit.
- Graphics ordered separately: This is the hardware platform. You choose the print supplier, the media, the campaign timing and the message. Our 340gsm waterproof polypropylene banner prints are designed specifically for this stand. Two banners are required for double-sided use.
Open-Plan Environments Where Double-Sided Visibility Matters
| Exhibition Island Stands and Open Booths | Island stands have no back wall. Every visitor approaches from a different direction. A double-sided banner ensures your campaign graphic is the first thing each visitor sees, regardless of their approach angle. The patented rail keeps both faces perfectly flat under exhibition hall lighting. |
| Retail Floor Centres and Aisle-End Displays | Positioned mid-floor or at the end of an aisle, the stand captures attention from shoppers moving in both directions. Two different promotions can address two different customer flows. The discreet cassette lets the stand blend into the retail environment. |
| Hotel and Conference Centre Lobbies | Welcome signage and event branding positioned in the centre of a lobby where guests enter from multiple points. The height-adjustable pole adapts to different ceiling heights and sightline requirements across venues. |
| University Open Days and Recruitment Events | Departmental branding in halls and corridors where prospective students and families approach from both ends. Two sides means two messages: course information on one face, campus life on the other. |
| Car Showrooms and Dealership Reception Areas | Finance offers, model launches and brand campaigns displayed on a freestanding unit that customers walk around rather than past. The solid-core base handles the daily foot traffic of a busy showroom floor. |
| Corporate Events, AGMs and Investor Presentations | Sponsor branding, agenda displays and directional signage positioned where attendees circulate from multiple entry points. The premium aluminium finish and hidden cassette project the production values that corporate events demand. |
How to Set Up Your Double-Sided Display
- Extend the base and position the stand on a level surface.
- Connect the pole sections and adjust the telescopic height between 1600mm and 2100mm.
- Slide each banner graphic into the front-loading rail on its respective side. The patented rail pulls the graphic flat automatically.
One person. No tools. Assembly in minutes. The stand is ready to display the moment both graphics are loaded.
Need a Premium Double-Sided Roller Banner?
The TWRB1000G features a premium double-sided design with a front-loading rail system, adjustable height up to 2100mm and a solid weighted base for enhanced stability. Ideal for exhibitions, retail spaces and high-traffic promotional environments where visibility from both directions is essential.
Call us on 01279460460 or send us your requirements and we will help you choose the right display solution.
Displaysense TWRB1000 Premium Double-Sided Aluminium Front Loading Roller Banner Stand. Hardware-only, graphics ordered separately. Takes 2 x 1000mm wide banners up to 2100mm tall. Patented front-loading rail system for flat, wrinkle-free graphic presentation on both sides. Discreet low-profile cassette. 18mm hybrid bungee-telescopic pole adjustable 1600-2100mm. Solid-core weighted base for high-footfall stability. Aluminium construction. One-person tool-free assembly. Premium padded carry bag included. For open-plan exhibitions, retail floor centres, reception lobbies and any space where visitors approach from both directions. Compatible with Displaysense 1000mm x 2000mm waterproof polypropylene banners. Also available as TWRB1000G with printing included. Single-sided version: PRG1000. Displaysense, UK display specialists since 1978.
Description
Consider the floor plan of any exhibition hall. Island stands sit in the centre of the space with traffic flowing around them from every direction. Aisle-end positions face two opposing flows. Reception lobbies have multiple entry points. In every one of these layouts, a single-sided banner stand presents your campaign to visitors approaching from one direction and a blank aluminium back to everyone else. You paid for the floor space. You paid for the graphic. Half your audience sees nothing. The double-sided stand exists to close that gap. Two graphic faces, one hardware unit, full visibility from every approach angle.
The patented front-loading rail is what separates this stand from lower-tier double-sided alternatives that use hook-on or clip-on attachment systems. Hook-on systems leave the graphic loose at the top edge, allowing it to bow outward, ripple in air-conditioned drafts and present an uneven surface that catches overhead lighting at different angles. The front-loading rail slides the banner into a precision channel that applies consistent tension across the full 1000mm width. Both faces sit perfectly flat. Both faces reflect light evenly. Both faces present a surface that looks engineered rather than assembled.
The discreet cassette is the other visible differentiator. Standard roller banner stands have a visible mechanism at the base: an exposed spring-loaded drum with a branded sticker and visible end caps. This stand hides the cassette behind a low-profile housing that sits at floor level and disappears from the viewer's sightline. The audience sees only the graphic and the slim aluminium pole. In an exhibition environment where first impressions determine which stands visitors approach, the hardware should be invisible. The message should be the only thing that registers.
This is the hardware investment. The aluminium frame, the patented rail, the solid-core base and the telescopic pole are built for years of repeated use across dozens of events and campaigns. Graphics are ordered separately because campaigns change and hardware does not. You can print two matching graphics for consistent branding on both sides, or print two different graphics for two different messages addressing two different audience flows. When the campaign ends, two new graphics slide into the same rails. The stand never needs replacing. Only the message does.
What Ships with the TWRB1000 Stand
- 1 x premium double-sided aluminium roller banner stand with patented front-loading rail system
- 1 x 18mm hybrid bungee-telescopic pole, adjustable 1600mm to 2100mm
- 1 x solid-core weighted base for freestanding stability in high-footfall environments
- 1 x premium padded carry bag for transport and storage
- Graphics NOT included (order two 1000mm wide banners separately)
Only Need One Graphic Face?
The PRG1000 single-sided stand uses the same patented front-loading rail, solid-core base and telescopic pole in a single-face configuration. Ideal for wall-adjacent positioning, booth-back displays and any layout where the stand has a wall behind it.
Call us on 01279460460 or send us your requirements and we will advise on single-sided or double-sided.
Displaysense TWRB1000 Premium Double-Sided Roller Banner Stand. Hardware only. Patented front-loading rail for flat wrinkle-free graphics on both faces. Discreet low-profile cassette hides mechanism from view. 18mm hybrid pole adjustable 1600-2100mm. Solid-core base. Aluminium. One-person assembly. Padded carry bag. Graphics ordered separately: two 1000mm wide banners required. Single-sided alternative: PRG1000. Complete kit with print: TWRB1000G. Displaysense, since 1978.
Specifications
Full specifications for the TWRB1000 premium double-sided roller banner stand. Every component is chosen for commercial-grade durability, precision graphic presentation and the repeated assembly-transport-storage cycle that exhibition and event hardware demands.
| Specification | Detail | What This Means for You |
|---|---|---|
| Configuration | Double-sided (2 graphic faces) | Two independent front-loading rails, one on each face. Full branded visibility from every approach direction. No blank reverse. |
| Compatible Banner Size | 2 x 1000mm (W) x up to 2100mm (H) | Accepts two standard 1000mm wide banners. Same or different graphics on each face. Height adjustable from 1600mm to 2100mm. |
| Rail System | Patented front-loading aluminium | Graphic slides into a precision channel for consistent tension across the full width. Flat, wrinkle-free presentation without bowing, rippling or uneven edges. |
| Cassette | Discreet low-profile housing | Mechanism hidden at floor level. Audience sees only the graphic and the pole. Professional, permanent-installation appearance from a portable unit. |
| Pole | 18mm hybrid bungee-telescopic | Bungee section absorbs vibration from foot traffic. Telescopic section locks at any height between 1600mm and 2100mm. Adapts to different venues and ceiling heights. |
| Base | Solid-core weighted aluminium | Planted stability without bolt-down fixings or additional weights. Designed for high-footfall exhibition halls, retail floors and busy reception areas. |
| Material | Aluminium throughout | Corrosion-resistant, portable, commercially durable. Built for years of repeated assembly, transport and exhibition use. |
| End Caps | Black | Sleek, minimal end caps that do not distract from the graphic. Blend into any exhibition stand colour scheme. |
| Assembly | One person, no tools | Pole connects, graphics slide into rails, stand is ready. Minutes from bag to display. |
| Carry Bag | Premium padded bag included | Stand, pole and base pack into a single bag for safe transport between venues. Padded interior protects the aluminium finish and rail mechanism. |
| Graphics Included | No (hardware only) | Two 1000mm wide banners ordered separately. Allows independent graphic sourcing, different campaigns per side and replacement prints without new hardware. |
| Recommended Print | 340gsm waterproof polypropylene | Our 1000mm x 2000mm polypropylene banner at 1200 dpi delivers gallery-grade output calibrated for front-loading rail stands. |
| Single-Sided Alternative | PRG1000 | Same patented rail, pole and base in a single-face configuration for wall-adjacent and booth-back positioning. |
| Complete Kit Alternative | TWRB1000G (with printing) | This stand plus two custom-printed banner graphics included. The most cost-effective option for a first purchase with immediate print needs. |
| Delivery | Free UK mainland | Free standard delivery to UK Mainland Zone 1. Next working day available at checkout. |
Delivery & Returns
Free delivery on every order, no minimum spend
UK Mainland standard delivery included on everything we sell.
Standard
Free
Always included, no minimum order
Express
£9.95
Express options shown at checkout where available
Lead time
2 to 3 days
Working days, UK Mainland
Returns
28 days
Original condition and packaging
Good to know
- Orders before 4pm typically ship the same day
- Tracking email sent on dispatch
- Ground-floor, accessible delivery point
Returns must be unused and in original packaging. Full delivery information · Returns policy
FAQs
Double-Sided Roller Banner Stand: Your Questions Answered
Q: Are the printed graphics included with this stand?
A: No. This is the hardware-only stand. You order two 1000mm wide banner graphics separately, which gives you full control over the print supplier, media type, campaign timing and messaging. Our 1000mm x 2000mm waterproof polypropylene banner print is designed specifically for front-loading rail stands like this one.
Q: Why would I buy the hardware without print instead of a complete kit?
A: If you already have graphics from a previous event, if you want to source print from a specific supplier, or if you plan to change campaigns frequently and want to order replacement graphics on their own schedule. The hardware is a multi-year investment. The graphics are campaign-specific running costs. Separating the two gives you flexibility.
Q: What is the advantage of double-sided over single-sided?
A: Visibility from every direction. A single-sided stand has a blank reverse. In open-plan spaces where visitors approach from both sides, including exhibition islands, retail floor centres, reception lobbies and aisle ends, the blank back is wasted real estate. Double-sided captures attention from every approach angle on the same floor footprint.
Q: Can I display different graphics on each side?
A: Yes. Each face has its own independent front-loading rail. You can run the same graphic on both sides for consistent branding, or display two entirely different campaigns to address different audience flows from opposite directions.
Q: What does the patented front-loading rail actually do?
A: It slides the banner into a precision aluminium channel along the top of the stand, applying consistent tension across the full 1000mm width. The graphic hangs perfectly flat with no bowing, rippling or wrinkles. Lower-tier alternatives use hook-on or clip-on systems that leave the top edge loose, allowing the banner to distort under air conditioning or vibration.
Q: How does the height adjustment work?
A: The 18mm pole combines a bungee section with a telescopic section. The telescopic mechanism locks at any height between 1600mm and 2100mm. This lets you adapt the stand to different venues, ceiling heights and sightline requirements without changing the graphic.
Q: Is the base stable enough for a busy exhibition hall?
A: Yes. The solid-core weighted base anchors the stand without bolt-down fixings or additional sandbags. It is designed for high-footfall environments where visitors brush past, bump into stands and drag bags across floors. The bungee section of the pole absorbs vibration rather than transferring it to the graphics.
Q: How long does assembly take?
A: Minutes. One person, no tools. Extend the base, connect the pole sections, adjust the height and slide each graphic into its front-loading rail. After the first setup, the process becomes instinctive.
Q: What banner media works best with this stand?
A: Our 340gsm waterproof polypropylene banner is designed for front-loading rail stands. The 340gsm weight provides the rigidity for flat presentation, the anti-curl properties prevent edge-lifting and the satin finish diffuses exhibition lighting. Printed at 1200 dpi on an Epson photo-grade printer for gallery-grade output.
Q: Is the cassette visible to the audience?
A: Barely. The low-profile cassette housing sits at floor level and is engineered to disappear from the viewer's natural sightline. The audience sees the graphic and the slim aluminium pole. The mechanism that holds everything together stays out of sight.
Q: How does this stand transport between events?
A: The stand, pole and base pack into the included premium padded carry bag. One person carries it. The padded interior protects the aluminium finish and the patented rail mechanism during transit. Graphics travel separately or in the same bag depending on the media type.
Q: How many events will this stand last?
A: The aluminium construction, patented rail and solid-core base are built for years of commercial use. Dozens of events, hundreds of assemblies, thousands of visitor interactions. The hardware outlasts every campaign graphic you will ever load into it.
Q: Is there a single-sided version of this stand?
A: Yes. The PRG1000 uses the same patented front-loading rail, solid-core base and telescopic pole in a single-face configuration. Choose single-sided for wall-adjacent positioning or booth-back displays where only one face is visible. Choose double-sided for open-plan environments.
Q: What other widths are available?
A: The premium double-sided front-loading range is available in 800mm, 1000mm and 1200mm widths. All use the same patented rail system, hybrid pole and solid-core base. Choose the width that matches your floor space and visual impact requirements.
Knowledge Hub
Exhibition Display, Event Branding and Stand Design Guides
The roller banner stand is the most portable display in any exhibition kit. How it presents your graphics, how it handles the traffic of a busy venue and whether it captures attention from every direction determine whether your stand works for you or against you. These guides cover exhibition strategy, event signage, in-store branding and customer experience.
