Great service, staff really helpful,
"Great service, staff really helpful, product delivered fast and good condition"
Overview
Description
Specifications
Delivery & Returns
FAQs
Knowledge Hub
The Widest Fabric Backdrop for Double and Island Stands
Book a double booth or an island stand and you inherit a back wall wide enough to get lost on. The STU6000 is the widest backdrop in the range, a single span of stretched fabric that dresses that whole expanse in one continuous branded image with no break down the middle. Its aluminium frame still clicks together by hand and wears the printed cover like a drum-tight skin, so the largest face in the line-up goes up without a build crew. Both sides carry your artwork, which counts for more on a big stand that visitors walk right around, where any exposed edge would otherwise flash bare cloth. Best suited for double-width booths, island stands and large conference sets where one unbroken backdrop has to hold a wide frontage together.
Why a One-Piece Backdrop Beats Bolting Panels Together
- One graphic across the whole span: a stand this wide would normally be patched from several joined boards, but here a single sewn cover stretches the full width, so the eye runs along one unbroken image with no seams or shadow lines interrupting it, and the brand reads as a single statement rather than a row of boards.
- A big wall, still a one-person build: width does not bring weight or complexity, because the aluminium sections click together by hand in sequence, letting one person raise even this, the largest face in the range, in around ten minutes with no crew, no lifting gear and no booked build slot.
- Selling on both faces: visitors circle an island or double stand, so the reverse is on show as much as the front, and printing both sides means no angle of approach ever lands on a blank grey back, so the whole footprint of a large stand keeps working.
- Drawn tight, never rippled: across a span this wide a loose banner would sag and crease, yet the tensioned fabric stays flat and smooth from end to end, holding colour and detail steady for photographs and footage right across a frame that a camera often takes in all at once.
- Cleared for the venue on arrival: the cloth carries B1 fire certification recognised at the big exhibition halls, so a large display passes the fire check without the on-site treatment and contractor charges that only grow as a stand gets bigger.
- Reusable frame, swappable skin: the aluminium frame is the part you keep, taking a fresh printed cover for each new campaign, so the widest stand in your kit need not mean the most expensive to rebrand when a campaign moves on.
A Seamless Branded Wall for Large Exhibition Stands
| Double Booths and Island Stands | Where two bays join into one stand, the full-width wall ties them into a single branded frontage instead of a seam down the centre, reading as one statement from right across the exhibition floor and drawing footfall toward the larger pitch. |
| Conference Main Stages | Behind a keynote stage or a panel of speakers, the wide fabric face fills the camera frame with clean branding, dressing a large platform for talks, awards and live streams without the cost or rigging of a built stage set. |
| Large Foyers and Atriums | Set across a hotel foyer or an office atrium, the expanse of stretched cloth turns an open entrance into a branded arrival space for a launch or a conference, then strikes down to a single case once the event is cleared. |
| Showrooms and Retail Floors | Inside a large store or a showroom, a freestanding wall of this width screens a back area or frames a hero product, standing on its own feet with no fixing drilled into the building behind, and moving to a new spot as the floor is reset. |
| Awards Nights and Galas | Dressing a stage or a step-and-repeat line at an awards evening, the seamless surface gives sponsors a wide, photogenic backdrop that looks the part on the night under stage lighting and packs to a single case at the close. |
| Roadshows and Touring Stands | For an agency or a brand touring several venues, the lightweight frame and slide-on cover make a large stand quick to rebuild city to city, with replacement graphics ready as each leg of the tour changes its message. |
Narrower Stand, or a Counter to Match?
Working a smaller bay this time? The same system steps down to a 4 metre straight backdrop for single booths. To round out the stand, pair it with a matching fabric exhibition counter for welcoming visitors and tucking literature out of sight.
Speccing a large stand? Call 01279460460 or message the team and we will size it with you.
STU6000 is a 6000mm double-sided straight tension fabric exhibition backdrop display from Displaysense, the widest straight backdrop in the range. Its differentiator is a single seamless fabric span that dresses the back of a double-width or island stand in one continuous double-sided graphic on a slim aluminium frame. Dimensions 2280mm high by 6000mm wide by 400mm deep. Weight 11.7kg. Both faces print by dye sublimation onto B1 fire-retardant stretch polyester rated to DIN 4102-1. Its aluminium frame assembles by hand, no tools, in about ten minutes, rests on stabilising feet, and the cover slides over then zips at the base. It stows in a padded carry case, and replacement covers are sold separately. Suited to double booths, island stands, conference stages, large foyers and retail interiors, for indoor use only. Also available in 2000mm, 2500mm, 3000mm, 4000mm and 5000mm widths, and in a curved version. Displaysense, UK display product specialists since 1978.
The point of a wide tension display is that it stays one piece. Rather than bolting several rigid panels side by side and living with the lines where they meet, a single fabric cover is sewn to the full width and stretched over the frame as one continuous surface. The further that surface runs, the more a join would show, so a seamless span is exactly what a large stand needs. From across the hall, a visitor reads one wall of branding, not a row of boards.
Carrying a face this large without a build crew comes down to the frame. It is aluminium, chosen because it stays light and rigid at width, and its sections push and click into one another in order, with no tools, loose fittings or printed steps to follow. One person works along the frame and has the full wall standing in around ten minutes. Stabilising feet then bolt to the base and hold the display upright on the floor, so even at this size nothing needs weighting, taping or propping to keep it secure.
The cover that goes over it is printed on both faces by dye sublimation. Under heat the inks vaporise and sink into the polyester threads, locking the colour inside the weave instead of leaving it on the surface to scuff. That is what lets the cloth be folded, boxed and stretched out again, event after event, with no cracking, peeling or fading of the print. With both faces covered, an island stand that people pass on every side reads as finished branding from any angle.
Two practical things make a large display venue-ready. The cloth holds a B1 fire-retardant certificate to DIN 4102-1, the rating halls here and across Europe ask for, which sidesteps the fireproofing job applied on site and the contractor bill that rides on it. And for all its width, the display folds down into one padded carry case sized for a car boot or a courier pallet. It belongs indoors, in halls, foyers and retail floors, and its aluminium frame will run for years on fresh fabric covers.
What Ships in Your Pack
- 1 x straight aluminium tension frame, full 6 metre stand width
- 1 x double-sided printed stretch fabric graphic, from your artwork
- 1 x set of stabilising feet
- 1 x padded carry case
Equipping a Whole Show Presence?
A large stand often travels as one part of a wider set, so we make these displays to order for brand teams and stand builders running multi-venue programmes, matching the artwork across a fleet of units. When the message moves on, a reprinted cover slips onto the same frame, keeping a big stand current without buying it twice.
Brief us on the run. Call 01279460460 or list your venues and we will schedule the print.
STU6000 is a 6000mm double-sided straight tension fabric exhibition backdrop display from Displaysense, the widest straight backdrop in the range. Its differentiator is a single seamless fabric span that dresses the back of a double-width or island stand in one continuous double-sided graphic on a slim aluminium frame. Dimensions 2280mm high by 6000mm wide by 400mm deep. Weight 11.7kg. Both faces print by dye sublimation onto B1 fire-retardant stretch polyester rated to DIN 4102-1. Its aluminium frame assembles by hand, no tools, in about ten minutes, rests on stabilising feet, and the cover slides over then zips at the base. It stows in a padded carry case, and replacement covers are sold separately. Suited to double booths, island stands, conference stages, large foyers and retail interiors, for indoor use only. Also available in 2000mm, 2500mm, 3000mm, 4000mm and 5000mm widths, and in a curved version. Displaysense, UK display product specialists since 1978.
Reference detail for the 6m double-sided straight tension fabric backdrop, the widest in the range. A single seamless stretch-fabric graphic prints on both faces and pulls drum-tight over a tool-free aluminium frame, certified to the B1 fire standard for indoor exhibition and event venues. Its aluminium frame is reusable, taking fresh covers as branding changes.
6m
Wall Width
Double
Sided Print
B1
Fire Rated
10 Min
Tool-Free Build
11.7kg
Total Weight
| Specification | Detail | What This Means for You |
|---|---|---|
| Display Type | Straight tension fabric backdrop | A flat, freestanding wall of branded fabric that sits flush to the back of your stand. No curve and minimal depth at all, so the floor in front stays open for everything that happens on the stand. |
| Width | 6000mm | The widest in the range, spanning the back of a double-width or island stand with one seamless graphic and no centre join. |
| Height | 2280mm | Tall enough to stand over presenters, counters and product plinths, and to mask the venue shell-scheme panelling behind the stand from view. |
| Depth | 400mm | Among the slimmest in the range, it hugs the back of the stand and gives up barely any of the floor you are paying for by the square metre. |
| Weight | 11.7kg | Light for its size, so one person can still lift, carry and load the whole stand into a car boot, yet stable on the floor once the feet are fitted. |
| Print Sides | Double-sided | Your artwork prints on both faces, so an island stand seen from every side shows branding on the reverse rather than a blank surface. |
| Printing Method | Dye-sublimation | Colour is driven into the polyester itself, staying vivid through years of folding, packing and reuse without lifting, flaking or going dull. |
| Fabric Material | Fire-retardant stretch polyester | A lightweight cloth that pulls tight over the wide frame for a crease-free surface with no visible seams, panel lines or joins. |
| Fire Rating | B1 (DIN 4102-1) | A certificate the big UK and European halls accept on sight, sparing you the on-site fireproofing and the contractor invoice that an untreated wall brings. |
| Frame Material | Aluminium with stabilising feet | Light, rigid and rust-proof, made to be built, struck and shipped over and over, and steadied on the floor by feet that ask for no weights or tape. |
| Assembly | Click-together, no tools | Frame sections connect by hand and the fabric slides on like a fitted cover then zips at the base, so one person builds even this width in around ten minutes. |
| Recommended Use | Indoor only | Made for indoor settings such as exhibition halls, conference suites, hotels, offices and retail floors. It carries no rating for outdoor wind or rain. |
Print to order. We handle the artwork process with you.
We send a template, you submit your artwork, we produce once approved.
Delivery
Free
UK Mainland, Zone 1
Lead time
3 to 5 days
From artwork approval
Template sent
Within 24hrs
After your order is placed
Returns
Bespoke
Non-returnable unless faulty
How It Works
You
Us
-
1You
Place your order
Payment taken at this stage. Your lead time does not start until your artwork is approved.
-
2Us, within 24 hours
We email you a print template
A personalised template with full instructions. Please check your inbox and spam folder.
-
3You, next step
Submit your artwork
Follow the template instructions and email your artwork back to us.
-
4Us
We review and approve
If anything needs adjusting we will contact you. Once approved, your order enters production.
-
5Us
Production and dispatch
Lead time begins from artwork approval, not your order date.
Need it faster?
Express Print Service Available
Turnaround and pricing on a quote basis. Contact us before ordering.
Bespoke print orders are non-returnable. If your item arrives damaged or contains a manufacturing error, we will put it right. Returns policy · Delivery information
Frequently Asked Questions About This 6m Tension Fabric Backdrop
Q: What is the best backdrop for a double-width or island exhibition stand?
A: That is the STU6000's whole purpose. As the widest straight backdrop in the range at 6000mm, it wraps a double booth or an island stand in one seamless double-sided graphic, rises 2280mm to bury the shell scheme, and goes up tool-free on a clicked-together aluminium frame in roughly ten minutes.
Q: Does a 6m fabric wall sag or wrinkle across the middle?
A: No, because the cover is tensioned rather than hung. Sewn to the full six metres and pulled drum-tight across the frame, it has no slack to gather into wrinkles and no centre seam to droop. A strung banner that wide would bow in the middle, while a stretched fabric wall keeps a flat, even face the whole way along.
Q: Do both sides of a large backdrop need printing?
A: For a stand people walk around, both faces earn their keep. An island or double booth is open on more than one side, so the back is in view nearly as often as the front. Dye-sublimation print on each face turns every approach into finished branding and leaves no bare panel facing the aisle behind.
Q: Is a wide tension fabric display right for a conference main stage?
A: It works very well there. A wide, seam-free fabric face sits cleanly behind a keynote or a panel and fills what the camera captures, which suits talks, awards shows and streamed sessions. No stage set is built, the feet hold it steady on the platform, and a few minutes clears it once the programme finishes.
Q: Can a large fabric wall work in a foyer, atrium or showroom?
A: Yes, in indoor settings. Hotel foyers, office atriums, showrooms and large retail floors all suit it, whether you are branding an arrival space or screening off a back area. Nothing fixes to the building because it free-stands on its feet, though it is built for inside use and is not rated against outdoor wind or rain.
Q: Can one person put up a display this wide?
A: Yes. The extra width only adds a few more sections to the click-together frame, not tools or lifting gear. Working along the frame, fitting the feet and sliding the zipped cover over the top takes one pair of hands about ten minutes, and the whole stand comes out of a single padded case.
Q: How wide and tall is it, and what stand size does it suit?
A: It runs 6000mm wide and 2280mm tall on a slim 400mm depth. That makes it the widest straight option in the range, sized for double-width booths, island stands and broad stages, while the height covers a standing presenter and the shell-scheme panels behind the stand.
Q: Should I choose the 6 metre or the 5 metre width?
A: The deciding factor is how wide your stand is. The 6 metre version is the widest, made to span a double or island stand in one wall, while the STU5000 covers a standard large booth at five metres. Frame, fabric and double-sided printing are shared, so measure your back wall and take the width that fills it without spilling past the bay.
Q: Is the cost worth it for a stand we change often?
A: For changing branding it tends to pay back. Only the printed cover carries the design, and the aluminium frame beneath is built to last, so each new look is a replacement cover rather than a fresh stand. Spread over a few campaigns, that holds the cost per event down even on the biggest display here.
Q: Will a large fabric backdrop pass venue fire rules?
A: It will. Certification to B1 under DIN 4102-1 is held across UK and European exhibition venues, so the fabric satisfies their fire rules the moment it arrives. On a wall this size the saving is real, since an uncertified display draws on-site fireproofing and the contractor fees attached to it.
Q: Is UK delivery free, and what arrives in the box?
A: Delivery to the UK mainland is free. Packed in the padded case are the aluminium frame, the double-sided printed fabric, the stabilising feet and a 1 year guarantee, and full-colour print on both faces is part of the price, proofed before it runs. Displaysense has been supplying display products since 1978.
Q: Does it come in narrower widths or a curved shape?
A: Yes. Narrower stands are covered by 2000mm, 2500mm, 3000mm, 4000mm and 5000mm straight widths, and the same display comes curved for a wraparound look. A fabric exhibition counter can be added alongside to complete the stand.
Guides for Large Exhibition Stands and Show Impact
A wide backdrop gives a big stand its presence, but filling that space well takes more than square metres. The guides below look at pulling a crowd to a busy exhibition stand, weighing up UK venues for the best return, signage ideas that lift a whole event and choosing display graphics that pack down and travel between shows.
Overview
The Widest Fabric Backdrop for Double and Island Stands
Book a double booth or an island stand and you inherit a back wall wide enough to get lost on. The STU6000 is the widest backdrop in the range, a single span of stretched fabric that dresses that whole expanse in one continuous branded image with no break down the middle. Its aluminium frame still clicks together by hand and wears the printed cover like a drum-tight skin, so the largest face in the line-up goes up without a build crew. Both sides carry your artwork, which counts for more on a big stand that visitors walk right around, where any exposed edge would otherwise flash bare cloth. Best suited for double-width booths, island stands and large conference sets where one unbroken backdrop has to hold a wide frontage together.
Why a One-Piece Backdrop Beats Bolting Panels Together
- One graphic across the whole span: a stand this wide would normally be patched from several joined boards, but here a single sewn cover stretches the full width, so the eye runs along one unbroken image with no seams or shadow lines interrupting it, and the brand reads as a single statement rather than a row of boards.
- A big wall, still a one-person build: width does not bring weight or complexity, because the aluminium sections click together by hand in sequence, letting one person raise even this, the largest face in the range, in around ten minutes with no crew, no lifting gear and no booked build slot.
- Selling on both faces: visitors circle an island or double stand, so the reverse is on show as much as the front, and printing both sides means no angle of approach ever lands on a blank grey back, so the whole footprint of a large stand keeps working.
- Drawn tight, never rippled: across a span this wide a loose banner would sag and crease, yet the tensioned fabric stays flat and smooth from end to end, holding colour and detail steady for photographs and footage right across a frame that a camera often takes in all at once.
- Cleared for the venue on arrival: the cloth carries B1 fire certification recognised at the big exhibition halls, so a large display passes the fire check without the on-site treatment and contractor charges that only grow as a stand gets bigger.
- Reusable frame, swappable skin: the aluminium frame is the part you keep, taking a fresh printed cover for each new campaign, so the widest stand in your kit need not mean the most expensive to rebrand when a campaign moves on.
A Seamless Branded Wall for Large Exhibition Stands
| Double Booths and Island Stands | Where two bays join into one stand, the full-width wall ties them into a single branded frontage instead of a seam down the centre, reading as one statement from right across the exhibition floor and drawing footfall toward the larger pitch. |
| Conference Main Stages | Behind a keynote stage or a panel of speakers, the wide fabric face fills the camera frame with clean branding, dressing a large platform for talks, awards and live streams without the cost or rigging of a built stage set. |
| Large Foyers and Atriums | Set across a hotel foyer or an office atrium, the expanse of stretched cloth turns an open entrance into a branded arrival space for a launch or a conference, then strikes down to a single case once the event is cleared. |
| Showrooms and Retail Floors | Inside a large store or a showroom, a freestanding wall of this width screens a back area or frames a hero product, standing on its own feet with no fixing drilled into the building behind, and moving to a new spot as the floor is reset. |
| Awards Nights and Galas | Dressing a stage or a step-and-repeat line at an awards evening, the seamless surface gives sponsors a wide, photogenic backdrop that looks the part on the night under stage lighting and packs to a single case at the close. |
| Roadshows and Touring Stands | For an agency or a brand touring several venues, the lightweight frame and slide-on cover make a large stand quick to rebuild city to city, with replacement graphics ready as each leg of the tour changes its message. |
Narrower Stand, or a Counter to Match?
Working a smaller bay this time? The same system steps down to a 4 metre straight backdrop for single booths. To round out the stand, pair it with a matching fabric exhibition counter for welcoming visitors and tucking literature out of sight.
Speccing a large stand? Call 01279460460 or message the team and we will size it with you.
STU6000 is a 6000mm double-sided straight tension fabric exhibition backdrop display from Displaysense, the widest straight backdrop in the range. Its differentiator is a single seamless fabric span that dresses the back of a double-width or island stand in one continuous double-sided graphic on a slim aluminium frame. Dimensions 2280mm high by 6000mm wide by 400mm deep. Weight 11.7kg. Both faces print by dye sublimation onto B1 fire-retardant stretch polyester rated to DIN 4102-1. Its aluminium frame assembles by hand, no tools, in about ten minutes, rests on stabilising feet, and the cover slides over then zips at the base. It stows in a padded carry case, and replacement covers are sold separately. Suited to double booths, island stands, conference stages, large foyers and retail interiors, for indoor use only. Also available in 2000mm, 2500mm, 3000mm, 4000mm and 5000mm widths, and in a curved version. Displaysense, UK display product specialists since 1978.
Description
The point of a wide tension display is that it stays one piece. Rather than bolting several rigid panels side by side and living with the lines where they meet, a single fabric cover is sewn to the full width and stretched over the frame as one continuous surface. The further that surface runs, the more a join would show, so a seamless span is exactly what a large stand needs. From across the hall, a visitor reads one wall of branding, not a row of boards.
Carrying a face this large without a build crew comes down to the frame. It is aluminium, chosen because it stays light and rigid at width, and its sections push and click into one another in order, with no tools, loose fittings or printed steps to follow. One person works along the frame and has the full wall standing in around ten minutes. Stabilising feet then bolt to the base and hold the display upright on the floor, so even at this size nothing needs weighting, taping or propping to keep it secure.
The cover that goes over it is printed on both faces by dye sublimation. Under heat the inks vaporise and sink into the polyester threads, locking the colour inside the weave instead of leaving it on the surface to scuff. That is what lets the cloth be folded, boxed and stretched out again, event after event, with no cracking, peeling or fading of the print. With both faces covered, an island stand that people pass on every side reads as finished branding from any angle.
Two practical things make a large display venue-ready. The cloth holds a B1 fire-retardant certificate to DIN 4102-1, the rating halls here and across Europe ask for, which sidesteps the fireproofing job applied on site and the contractor bill that rides on it. And for all its width, the display folds down into one padded carry case sized for a car boot or a courier pallet. It belongs indoors, in halls, foyers and retail floors, and its aluminium frame will run for years on fresh fabric covers.
What Ships in Your Pack
- 1 x straight aluminium tension frame, full 6 metre stand width
- 1 x double-sided printed stretch fabric graphic, from your artwork
- 1 x set of stabilising feet
- 1 x padded carry case
Equipping a Whole Show Presence?
A large stand often travels as one part of a wider set, so we make these displays to order for brand teams and stand builders running multi-venue programmes, matching the artwork across a fleet of units. When the message moves on, a reprinted cover slips onto the same frame, keeping a big stand current without buying it twice.
Brief us on the run. Call 01279460460 or list your venues and we will schedule the print.
STU6000 is a 6000mm double-sided straight tension fabric exhibition backdrop display from Displaysense, the widest straight backdrop in the range. Its differentiator is a single seamless fabric span that dresses the back of a double-width or island stand in one continuous double-sided graphic on a slim aluminium frame. Dimensions 2280mm high by 6000mm wide by 400mm deep. Weight 11.7kg. Both faces print by dye sublimation onto B1 fire-retardant stretch polyester rated to DIN 4102-1. Its aluminium frame assembles by hand, no tools, in about ten minutes, rests on stabilising feet, and the cover slides over then zips at the base. It stows in a padded carry case, and replacement covers are sold separately. Suited to double booths, island stands, conference stages, large foyers and retail interiors, for indoor use only. Also available in 2000mm, 2500mm, 3000mm, 4000mm and 5000mm widths, and in a curved version. Displaysense, UK display product specialists since 1978.
Specifications
Reference detail for the 6m double-sided straight tension fabric backdrop, the widest in the range. A single seamless stretch-fabric graphic prints on both faces and pulls drum-tight over a tool-free aluminium frame, certified to the B1 fire standard for indoor exhibition and event venues. Its aluminium frame is reusable, taking fresh covers as branding changes.
6m
Wall Width
Double
Sided Print
B1
Fire Rated
10 Min
Tool-Free Build
11.7kg
Total Weight
| Specification | Detail | What This Means for You |
|---|---|---|
| Display Type | Straight tension fabric backdrop | A flat, freestanding wall of branded fabric that sits flush to the back of your stand. No curve and minimal depth at all, so the floor in front stays open for everything that happens on the stand. |
| Width | 6000mm | The widest in the range, spanning the back of a double-width or island stand with one seamless graphic and no centre join. |
| Height | 2280mm | Tall enough to stand over presenters, counters and product plinths, and to mask the venue shell-scheme panelling behind the stand from view. |
| Depth | 400mm | Among the slimmest in the range, it hugs the back of the stand and gives up barely any of the floor you are paying for by the square metre. |
| Weight | 11.7kg | Light for its size, so one person can still lift, carry and load the whole stand into a car boot, yet stable on the floor once the feet are fitted. |
| Print Sides | Double-sided | Your artwork prints on both faces, so an island stand seen from every side shows branding on the reverse rather than a blank surface. |
| Printing Method | Dye-sublimation | Colour is driven into the polyester itself, staying vivid through years of folding, packing and reuse without lifting, flaking or going dull. |
| Fabric Material | Fire-retardant stretch polyester | A lightweight cloth that pulls tight over the wide frame for a crease-free surface with no visible seams, panel lines or joins. |
| Fire Rating | B1 (DIN 4102-1) | A certificate the big UK and European halls accept on sight, sparing you the on-site fireproofing and the contractor invoice that an untreated wall brings. |
| Frame Material | Aluminium with stabilising feet | Light, rigid and rust-proof, made to be built, struck and shipped over and over, and steadied on the floor by feet that ask for no weights or tape. |
| Assembly | Click-together, no tools | Frame sections connect by hand and the fabric slides on like a fitted cover then zips at the base, so one person builds even this width in around ten minutes. |
| Recommended Use | Indoor only | Made for indoor settings such as exhibition halls, conference suites, hotels, offices and retail floors. It carries no rating for outdoor wind or rain. |
Delivery & Returns
Print to order. We handle the artwork process with you.
We send a template, you submit your artwork, we produce once approved.
Delivery
Free
UK Mainland, Zone 1
Lead time
3 to 5 days
From artwork approval
Template sent
Within 24hrs
After your order is placed
Returns
Bespoke
Non-returnable unless faulty
How It Works
You
Us
-
1You
Place your order
Payment taken at this stage. Your lead time does not start until your artwork is approved.
-
2Us, within 24 hours
We email you a print template
A personalised template with full instructions. Please check your inbox and spam folder.
-
3You, next step
Submit your artwork
Follow the template instructions and email your artwork back to us.
-
4Us
We review and approve
If anything needs adjusting we will contact you. Once approved, your order enters production.
-
5Us
Production and dispatch
Lead time begins from artwork approval, not your order date.
Need it faster?
Express Print Service Available
Turnaround and pricing on a quote basis. Contact us before ordering.
Bespoke print orders are non-returnable. If your item arrives damaged or contains a manufacturing error, we will put it right. Returns policy · Delivery information
FAQs
Frequently Asked Questions About This 6m Tension Fabric Backdrop
Q: What is the best backdrop for a double-width or island exhibition stand?
A: That is the STU6000's whole purpose. As the widest straight backdrop in the range at 6000mm, it wraps a double booth or an island stand in one seamless double-sided graphic, rises 2280mm to bury the shell scheme, and goes up tool-free on a clicked-together aluminium frame in roughly ten minutes.
Q: Does a 6m fabric wall sag or wrinkle across the middle?
A: No, because the cover is tensioned rather than hung. Sewn to the full six metres and pulled drum-tight across the frame, it has no slack to gather into wrinkles and no centre seam to droop. A strung banner that wide would bow in the middle, while a stretched fabric wall keeps a flat, even face the whole way along.
Q: Do both sides of a large backdrop need printing?
A: For a stand people walk around, both faces earn their keep. An island or double booth is open on more than one side, so the back is in view nearly as often as the front. Dye-sublimation print on each face turns every approach into finished branding and leaves no bare panel facing the aisle behind.
Q: Is a wide tension fabric display right for a conference main stage?
A: It works very well there. A wide, seam-free fabric face sits cleanly behind a keynote or a panel and fills what the camera captures, which suits talks, awards shows and streamed sessions. No stage set is built, the feet hold it steady on the platform, and a few minutes clears it once the programme finishes.
Q: Can a large fabric wall work in a foyer, atrium or showroom?
A: Yes, in indoor settings. Hotel foyers, office atriums, showrooms and large retail floors all suit it, whether you are branding an arrival space or screening off a back area. Nothing fixes to the building because it free-stands on its feet, though it is built for inside use and is not rated against outdoor wind or rain.
Q: Can one person put up a display this wide?
A: Yes. The extra width only adds a few more sections to the click-together frame, not tools or lifting gear. Working along the frame, fitting the feet and sliding the zipped cover over the top takes one pair of hands about ten minutes, and the whole stand comes out of a single padded case.
Q: How wide and tall is it, and what stand size does it suit?
A: It runs 6000mm wide and 2280mm tall on a slim 400mm depth. That makes it the widest straight option in the range, sized for double-width booths, island stands and broad stages, while the height covers a standing presenter and the shell-scheme panels behind the stand.
Q: Should I choose the 6 metre or the 5 metre width?
A: The deciding factor is how wide your stand is. The 6 metre version is the widest, made to span a double or island stand in one wall, while the STU5000 covers a standard large booth at five metres. Frame, fabric and double-sided printing are shared, so measure your back wall and take the width that fills it without spilling past the bay.
Q: Is the cost worth it for a stand we change often?
A: For changing branding it tends to pay back. Only the printed cover carries the design, and the aluminium frame beneath is built to last, so each new look is a replacement cover rather than a fresh stand. Spread over a few campaigns, that holds the cost per event down even on the biggest display here.
Q: Will a large fabric backdrop pass venue fire rules?
A: It will. Certification to B1 under DIN 4102-1 is held across UK and European exhibition venues, so the fabric satisfies their fire rules the moment it arrives. On a wall this size the saving is real, since an uncertified display draws on-site fireproofing and the contractor fees attached to it.
Q: Is UK delivery free, and what arrives in the box?
A: Delivery to the UK mainland is free. Packed in the padded case are the aluminium frame, the double-sided printed fabric, the stabilising feet and a 1 year guarantee, and full-colour print on both faces is part of the price, proofed before it runs. Displaysense has been supplying display products since 1978.
Q: Does it come in narrower widths or a curved shape?
A: Yes. Narrower stands are covered by 2000mm, 2500mm, 3000mm, 4000mm and 5000mm straight widths, and the same display comes curved for a wraparound look. A fabric exhibition counter can be added alongside to complete the stand.
Knowledge Hub
Guides for Large Exhibition Stands and Show Impact
A wide backdrop gives a big stand its presence, but filling that space well takes more than square metres. The guides below look at pulling a crowd to a busy exhibition stand, weighing up UK venues for the best return, signage ideas that lift a whole event and choosing display graphics that pack down and travel between shows.
Double-Sided Straight Tension Fabric Exhibition Backdrop Display inc. Graphic Printing - 6000mm
Product code: STU6000
The point of a wide tension display is that it stays one piece. Rather than bolting several rigid panels side by side and living with the lines w...
Inc. VAT
£999.00
Ex. VAT
£832.50
In Stock - UK Dispatch
Buy More, Pay Less
| Quantity | Discount | Save |
|---|---|---|
| 1 - 1 | 0% off | £0.00 |
| 2 - 4 | 3% off | £29.97 |
| 5 + | 5% off | £49.95 |
Overview
Description
Specifications
Delivery & Returns
FAQs
Knowledge Hub
The Widest Fabric Backdrop for Double and Island Stands
Book a double booth or an island stand and you inherit a back wall wide enough to get lost on. The STU6000 is the widest backdrop in the range, a single span of stretched fabric that dresses that whole expanse in one continuous branded image with no break down the middle. Its aluminium frame still clicks together by hand and wears the printed cover like a drum-tight skin, so the largest face in the line-up goes up without a build crew. Both sides carry your artwork, which counts for more on a big stand that visitors walk right around, where any exposed edge would otherwise flash bare cloth. Best suited for double-width booths, island stands and large conference sets where one unbroken backdrop has to hold a wide frontage together.
Why a One-Piece Backdrop Beats Bolting Panels Together
- One graphic across the whole span: a stand this wide would normally be patched from several joined boards, but here a single sewn cover stretches the full width, so the eye runs along one unbroken image with no seams or shadow lines interrupting it, and the brand reads as a single statement rather than a row of boards.
- A big wall, still a one-person build: width does not bring weight or complexity, because the aluminium sections click together by hand in sequence, letting one person raise even this, the largest face in the range, in around ten minutes with no crew, no lifting gear and no booked build slot.
- Selling on both faces: visitors circle an island or double stand, so the reverse is on show as much as the front, and printing both sides means no angle of approach ever lands on a blank grey back, so the whole footprint of a large stand keeps working.
- Drawn tight, never rippled: across a span this wide a loose banner would sag and crease, yet the tensioned fabric stays flat and smooth from end to end, holding colour and detail steady for photographs and footage right across a frame that a camera often takes in all at once.
- Cleared for the venue on arrival: the cloth carries B1 fire certification recognised at the big exhibition halls, so a large display passes the fire check without the on-site treatment and contractor charges that only grow as a stand gets bigger.
- Reusable frame, swappable skin: the aluminium frame is the part you keep, taking a fresh printed cover for each new campaign, so the widest stand in your kit need not mean the most expensive to rebrand when a campaign moves on.
A Seamless Branded Wall for Large Exhibition Stands
| Double Booths and Island Stands | Where two bays join into one stand, the full-width wall ties them into a single branded frontage instead of a seam down the centre, reading as one statement from right across the exhibition floor and drawing footfall toward the larger pitch. |
| Conference Main Stages | Behind a keynote stage or a panel of speakers, the wide fabric face fills the camera frame with clean branding, dressing a large platform for talks, awards and live streams without the cost or rigging of a built stage set. |
| Large Foyers and Atriums | Set across a hotel foyer or an office atrium, the expanse of stretched cloth turns an open entrance into a branded arrival space for a launch or a conference, then strikes down to a single case once the event is cleared. |
| Showrooms and Retail Floors | Inside a large store or a showroom, a freestanding wall of this width screens a back area or frames a hero product, standing on its own feet with no fixing drilled into the building behind, and moving to a new spot as the floor is reset. |
| Awards Nights and Galas | Dressing a stage or a step-and-repeat line at an awards evening, the seamless surface gives sponsors a wide, photogenic backdrop that looks the part on the night under stage lighting and packs to a single case at the close. |
| Roadshows and Touring Stands | For an agency or a brand touring several venues, the lightweight frame and slide-on cover make a large stand quick to rebuild city to city, with replacement graphics ready as each leg of the tour changes its message. |
Narrower Stand, or a Counter to Match?
Working a smaller bay this time? The same system steps down to a 4 metre straight backdrop for single booths. To round out the stand, pair it with a matching fabric exhibition counter for welcoming visitors and tucking literature out of sight.
Speccing a large stand? Call 01279460460 or message the team and we will size it with you.
STU6000 is a 6000mm double-sided straight tension fabric exhibition backdrop display from Displaysense, the widest straight backdrop in the range. Its differentiator is a single seamless fabric span that dresses the back of a double-width or island stand in one continuous double-sided graphic on a slim aluminium frame. Dimensions 2280mm high by 6000mm wide by 400mm deep. Weight 11.7kg. Both faces print by dye sublimation onto B1 fire-retardant stretch polyester rated to DIN 4102-1. Its aluminium frame assembles by hand, no tools, in about ten minutes, rests on stabilising feet, and the cover slides over then zips at the base. It stows in a padded carry case, and replacement covers are sold separately. Suited to double booths, island stands, conference stages, large foyers and retail interiors, for indoor use only. Also available in 2000mm, 2500mm, 3000mm, 4000mm and 5000mm widths, and in a curved version. Displaysense, UK display product specialists since 1978.
The point of a wide tension display is that it stays one piece. Rather than bolting several rigid panels side by side and living with the lines where they meet, a single fabric cover is sewn to the full width and stretched over the frame as one continuous surface. The further that surface runs, the more a join would show, so a seamless span is exactly what a large stand needs. From across the hall, a visitor reads one wall of branding, not a row of boards.
Carrying a face this large without a build crew comes down to the frame. It is aluminium, chosen because it stays light and rigid at width, and its sections push and click into one another in order, with no tools, loose fittings or printed steps to follow. One person works along the frame and has the full wall standing in around ten minutes. Stabilising feet then bolt to the base and hold the display upright on the floor, so even at this size nothing needs weighting, taping or propping to keep it secure.
The cover that goes over it is printed on both faces by dye sublimation. Under heat the inks vaporise and sink into the polyester threads, locking the colour inside the weave instead of leaving it on the surface to scuff. That is what lets the cloth be folded, boxed and stretched out again, event after event, with no cracking, peeling or fading of the print. With both faces covered, an island stand that people pass on every side reads as finished branding from any angle.
Two practical things make a large display venue-ready. The cloth holds a B1 fire-retardant certificate to DIN 4102-1, the rating halls here and across Europe ask for, which sidesteps the fireproofing job applied on site and the contractor bill that rides on it. And for all its width, the display folds down into one padded carry case sized for a car boot or a courier pallet. It belongs indoors, in halls, foyers and retail floors, and its aluminium frame will run for years on fresh fabric covers.
What Ships in Your Pack
- 1 x straight aluminium tension frame, full 6 metre stand width
- 1 x double-sided printed stretch fabric graphic, from your artwork
- 1 x set of stabilising feet
- 1 x padded carry case
Equipping a Whole Show Presence?
A large stand often travels as one part of a wider set, so we make these displays to order for brand teams and stand builders running multi-venue programmes, matching the artwork across a fleet of units. When the message moves on, a reprinted cover slips onto the same frame, keeping a big stand current without buying it twice.
Brief us on the run. Call 01279460460 or list your venues and we will schedule the print.
STU6000 is a 6000mm double-sided straight tension fabric exhibition backdrop display from Displaysense, the widest straight backdrop in the range. Its differentiator is a single seamless fabric span that dresses the back of a double-width or island stand in one continuous double-sided graphic on a slim aluminium frame. Dimensions 2280mm high by 6000mm wide by 400mm deep. Weight 11.7kg. Both faces print by dye sublimation onto B1 fire-retardant stretch polyester rated to DIN 4102-1. Its aluminium frame assembles by hand, no tools, in about ten minutes, rests on stabilising feet, and the cover slides over then zips at the base. It stows in a padded carry case, and replacement covers are sold separately. Suited to double booths, island stands, conference stages, large foyers and retail interiors, for indoor use only. Also available in 2000mm, 2500mm, 3000mm, 4000mm and 5000mm widths, and in a curved version. Displaysense, UK display product specialists since 1978.
Reference detail for the 6m double-sided straight tension fabric backdrop, the widest in the range. A single seamless stretch-fabric graphic prints on both faces and pulls drum-tight over a tool-free aluminium frame, certified to the B1 fire standard for indoor exhibition and event venues. Its aluminium frame is reusable, taking fresh covers as branding changes.
6m
Wall Width
Double
Sided Print
B1
Fire Rated
10 Min
Tool-Free Build
11.7kg
Total Weight
| Specification | Detail | What This Means for You |
|---|---|---|
| Display Type | Straight tension fabric backdrop | A flat, freestanding wall of branded fabric that sits flush to the back of your stand. No curve and minimal depth at all, so the floor in front stays open for everything that happens on the stand. |
| Width | 6000mm | The widest in the range, spanning the back of a double-width or island stand with one seamless graphic and no centre join. |
| Height | 2280mm | Tall enough to stand over presenters, counters and product plinths, and to mask the venue shell-scheme panelling behind the stand from view. |
| Depth | 400mm | Among the slimmest in the range, it hugs the back of the stand and gives up barely any of the floor you are paying for by the square metre. |
| Weight | 11.7kg | Light for its size, so one person can still lift, carry and load the whole stand into a car boot, yet stable on the floor once the feet are fitted. |
| Print Sides | Double-sided | Your artwork prints on both faces, so an island stand seen from every side shows branding on the reverse rather than a blank surface. |
| Printing Method | Dye-sublimation | Colour is driven into the polyester itself, staying vivid through years of folding, packing and reuse without lifting, flaking or going dull. |
| Fabric Material | Fire-retardant stretch polyester | A lightweight cloth that pulls tight over the wide frame for a crease-free surface with no visible seams, panel lines or joins. |
| Fire Rating | B1 (DIN 4102-1) | A certificate the big UK and European halls accept on sight, sparing you the on-site fireproofing and the contractor invoice that an untreated wall brings. |
| Frame Material | Aluminium with stabilising feet | Light, rigid and rust-proof, made to be built, struck and shipped over and over, and steadied on the floor by feet that ask for no weights or tape. |
| Assembly | Click-together, no tools | Frame sections connect by hand and the fabric slides on like a fitted cover then zips at the base, so one person builds even this width in around ten minutes. |
| Recommended Use | Indoor only | Made for indoor settings such as exhibition halls, conference suites, hotels, offices and retail floors. It carries no rating for outdoor wind or rain. |
Print to order. We handle the artwork process with you.
We send a template, you submit your artwork, we produce once approved.
Delivery
Free
UK Mainland, Zone 1
Lead time
3 to 5 days
From artwork approval
Template sent
Within 24hrs
After your order is placed
Returns
Bespoke
Non-returnable unless faulty
How It Works
You
Us
-
1You
Place your order
Payment taken at this stage. Your lead time does not start until your artwork is approved.
-
2Us, within 24 hours
We email you a print template
A personalised template with full instructions. Please check your inbox and spam folder.
-
3You, next step
Submit your artwork
Follow the template instructions and email your artwork back to us.
-
4Us
We review and approve
If anything needs adjusting we will contact you. Once approved, your order enters production.
-
5Us
Production and dispatch
Lead time begins from artwork approval, not your order date.
Need it faster?
Express Print Service Available
Turnaround and pricing on a quote basis. Contact us before ordering.
Bespoke print orders are non-returnable. If your item arrives damaged or contains a manufacturing error, we will put it right. Returns policy · Delivery information
Frequently Asked Questions About This 6m Tension Fabric Backdrop
Q: What is the best backdrop for a double-width or island exhibition stand?
A: That is the STU6000's whole purpose. As the widest straight backdrop in the range at 6000mm, it wraps a double booth or an island stand in one seamless double-sided graphic, rises 2280mm to bury the shell scheme, and goes up tool-free on a clicked-together aluminium frame in roughly ten minutes.
Q: Does a 6m fabric wall sag or wrinkle across the middle?
A: No, because the cover is tensioned rather than hung. Sewn to the full six metres and pulled drum-tight across the frame, it has no slack to gather into wrinkles and no centre seam to droop. A strung banner that wide would bow in the middle, while a stretched fabric wall keeps a flat, even face the whole way along.
Q: Do both sides of a large backdrop need printing?
A: For a stand people walk around, both faces earn their keep. An island or double booth is open on more than one side, so the back is in view nearly as often as the front. Dye-sublimation print on each face turns every approach into finished branding and leaves no bare panel facing the aisle behind.
Q: Is a wide tension fabric display right for a conference main stage?
A: It works very well there. A wide, seam-free fabric face sits cleanly behind a keynote or a panel and fills what the camera captures, which suits talks, awards shows and streamed sessions. No stage set is built, the feet hold it steady on the platform, and a few minutes clears it once the programme finishes.
Q: Can a large fabric wall work in a foyer, atrium or showroom?
A: Yes, in indoor settings. Hotel foyers, office atriums, showrooms and large retail floors all suit it, whether you are branding an arrival space or screening off a back area. Nothing fixes to the building because it free-stands on its feet, though it is built for inside use and is not rated against outdoor wind or rain.
Q: Can one person put up a display this wide?
A: Yes. The extra width only adds a few more sections to the click-together frame, not tools or lifting gear. Working along the frame, fitting the feet and sliding the zipped cover over the top takes one pair of hands about ten minutes, and the whole stand comes out of a single padded case.
Q: How wide and tall is it, and what stand size does it suit?
A: It runs 6000mm wide and 2280mm tall on a slim 400mm depth. That makes it the widest straight option in the range, sized for double-width booths, island stands and broad stages, while the height covers a standing presenter and the shell-scheme panels behind the stand.
Q: Should I choose the 6 metre or the 5 metre width?
A: The deciding factor is how wide your stand is. The 6 metre version is the widest, made to span a double or island stand in one wall, while the STU5000 covers a standard large booth at five metres. Frame, fabric and double-sided printing are shared, so measure your back wall and take the width that fills it without spilling past the bay.
Q: Is the cost worth it for a stand we change often?
A: For changing branding it tends to pay back. Only the printed cover carries the design, and the aluminium frame beneath is built to last, so each new look is a replacement cover rather than a fresh stand. Spread over a few campaigns, that holds the cost per event down even on the biggest display here.
Q: Will a large fabric backdrop pass venue fire rules?
A: It will. Certification to B1 under DIN 4102-1 is held across UK and European exhibition venues, so the fabric satisfies their fire rules the moment it arrives. On a wall this size the saving is real, since an uncertified display draws on-site fireproofing and the contractor fees attached to it.
Q: Is UK delivery free, and what arrives in the box?
A: Delivery to the UK mainland is free. Packed in the padded case are the aluminium frame, the double-sided printed fabric, the stabilising feet and a 1 year guarantee, and full-colour print on both faces is part of the price, proofed before it runs. Displaysense has been supplying display products since 1978.
Q: Does it come in narrower widths or a curved shape?
A: Yes. Narrower stands are covered by 2000mm, 2500mm, 3000mm, 4000mm and 5000mm straight widths, and the same display comes curved for a wraparound look. A fabric exhibition counter can be added alongside to complete the stand.
Guides for Large Exhibition Stands and Show Impact
A wide backdrop gives a big stand its presence, but filling that space well takes more than square metres. The guides below look at pulling a crowd to a busy exhibition stand, weighing up UK venues for the best return, signage ideas that lift a whole event and choosing display graphics that pack down and travel between shows.
Overview
The Widest Fabric Backdrop for Double and Island Stands
Book a double booth or an island stand and you inherit a back wall wide enough to get lost on. The STU6000 is the widest backdrop in the range, a single span of stretched fabric that dresses that whole expanse in one continuous branded image with no break down the middle. Its aluminium frame still clicks together by hand and wears the printed cover like a drum-tight skin, so the largest face in the line-up goes up without a build crew. Both sides carry your artwork, which counts for more on a big stand that visitors walk right around, where any exposed edge would otherwise flash bare cloth. Best suited for double-width booths, island stands and large conference sets where one unbroken backdrop has to hold a wide frontage together.
Why a One-Piece Backdrop Beats Bolting Panels Together
- One graphic across the whole span: a stand this wide would normally be patched from several joined boards, but here a single sewn cover stretches the full width, so the eye runs along one unbroken image with no seams or shadow lines interrupting it, and the brand reads as a single statement rather than a row of boards.
- A big wall, still a one-person build: width does not bring weight or complexity, because the aluminium sections click together by hand in sequence, letting one person raise even this, the largest face in the range, in around ten minutes with no crew, no lifting gear and no booked build slot.
- Selling on both faces: visitors circle an island or double stand, so the reverse is on show as much as the front, and printing both sides means no angle of approach ever lands on a blank grey back, so the whole footprint of a large stand keeps working.
- Drawn tight, never rippled: across a span this wide a loose banner would sag and crease, yet the tensioned fabric stays flat and smooth from end to end, holding colour and detail steady for photographs and footage right across a frame that a camera often takes in all at once.
- Cleared for the venue on arrival: the cloth carries B1 fire certification recognised at the big exhibition halls, so a large display passes the fire check without the on-site treatment and contractor charges that only grow as a stand gets bigger.
- Reusable frame, swappable skin: the aluminium frame is the part you keep, taking a fresh printed cover for each new campaign, so the widest stand in your kit need not mean the most expensive to rebrand when a campaign moves on.
A Seamless Branded Wall for Large Exhibition Stands
| Double Booths and Island Stands | Where two bays join into one stand, the full-width wall ties them into a single branded frontage instead of a seam down the centre, reading as one statement from right across the exhibition floor and drawing footfall toward the larger pitch. |
| Conference Main Stages | Behind a keynote stage or a panel of speakers, the wide fabric face fills the camera frame with clean branding, dressing a large platform for talks, awards and live streams without the cost or rigging of a built stage set. |
| Large Foyers and Atriums | Set across a hotel foyer or an office atrium, the expanse of stretched cloth turns an open entrance into a branded arrival space for a launch or a conference, then strikes down to a single case once the event is cleared. |
| Showrooms and Retail Floors | Inside a large store or a showroom, a freestanding wall of this width screens a back area or frames a hero product, standing on its own feet with no fixing drilled into the building behind, and moving to a new spot as the floor is reset. |
| Awards Nights and Galas | Dressing a stage or a step-and-repeat line at an awards evening, the seamless surface gives sponsors a wide, photogenic backdrop that looks the part on the night under stage lighting and packs to a single case at the close. |
| Roadshows and Touring Stands | For an agency or a brand touring several venues, the lightweight frame and slide-on cover make a large stand quick to rebuild city to city, with replacement graphics ready as each leg of the tour changes its message. |
Narrower Stand, or a Counter to Match?
Working a smaller bay this time? The same system steps down to a 4 metre straight backdrop for single booths. To round out the stand, pair it with a matching fabric exhibition counter for welcoming visitors and tucking literature out of sight.
Speccing a large stand? Call 01279460460 or message the team and we will size it with you.
STU6000 is a 6000mm double-sided straight tension fabric exhibition backdrop display from Displaysense, the widest straight backdrop in the range. Its differentiator is a single seamless fabric span that dresses the back of a double-width or island stand in one continuous double-sided graphic on a slim aluminium frame. Dimensions 2280mm high by 6000mm wide by 400mm deep. Weight 11.7kg. Both faces print by dye sublimation onto B1 fire-retardant stretch polyester rated to DIN 4102-1. Its aluminium frame assembles by hand, no tools, in about ten minutes, rests on stabilising feet, and the cover slides over then zips at the base. It stows in a padded carry case, and replacement covers are sold separately. Suited to double booths, island stands, conference stages, large foyers and retail interiors, for indoor use only. Also available in 2000mm, 2500mm, 3000mm, 4000mm and 5000mm widths, and in a curved version. Displaysense, UK display product specialists since 1978.
Description
The point of a wide tension display is that it stays one piece. Rather than bolting several rigid panels side by side and living with the lines where they meet, a single fabric cover is sewn to the full width and stretched over the frame as one continuous surface. The further that surface runs, the more a join would show, so a seamless span is exactly what a large stand needs. From across the hall, a visitor reads one wall of branding, not a row of boards.
Carrying a face this large without a build crew comes down to the frame. It is aluminium, chosen because it stays light and rigid at width, and its sections push and click into one another in order, with no tools, loose fittings or printed steps to follow. One person works along the frame and has the full wall standing in around ten minutes. Stabilising feet then bolt to the base and hold the display upright on the floor, so even at this size nothing needs weighting, taping or propping to keep it secure.
The cover that goes over it is printed on both faces by dye sublimation. Under heat the inks vaporise and sink into the polyester threads, locking the colour inside the weave instead of leaving it on the surface to scuff. That is what lets the cloth be folded, boxed and stretched out again, event after event, with no cracking, peeling or fading of the print. With both faces covered, an island stand that people pass on every side reads as finished branding from any angle.
Two practical things make a large display venue-ready. The cloth holds a B1 fire-retardant certificate to DIN 4102-1, the rating halls here and across Europe ask for, which sidesteps the fireproofing job applied on site and the contractor bill that rides on it. And for all its width, the display folds down into one padded carry case sized for a car boot or a courier pallet. It belongs indoors, in halls, foyers and retail floors, and its aluminium frame will run for years on fresh fabric covers.
What Ships in Your Pack
- 1 x straight aluminium tension frame, full 6 metre stand width
- 1 x double-sided printed stretch fabric graphic, from your artwork
- 1 x set of stabilising feet
- 1 x padded carry case
Equipping a Whole Show Presence?
A large stand often travels as one part of a wider set, so we make these displays to order for brand teams and stand builders running multi-venue programmes, matching the artwork across a fleet of units. When the message moves on, a reprinted cover slips onto the same frame, keeping a big stand current without buying it twice.
Brief us on the run. Call 01279460460 or list your venues and we will schedule the print.
STU6000 is a 6000mm double-sided straight tension fabric exhibition backdrop display from Displaysense, the widest straight backdrop in the range. Its differentiator is a single seamless fabric span that dresses the back of a double-width or island stand in one continuous double-sided graphic on a slim aluminium frame. Dimensions 2280mm high by 6000mm wide by 400mm deep. Weight 11.7kg. Both faces print by dye sublimation onto B1 fire-retardant stretch polyester rated to DIN 4102-1. Its aluminium frame assembles by hand, no tools, in about ten minutes, rests on stabilising feet, and the cover slides over then zips at the base. It stows in a padded carry case, and replacement covers are sold separately. Suited to double booths, island stands, conference stages, large foyers and retail interiors, for indoor use only. Also available in 2000mm, 2500mm, 3000mm, 4000mm and 5000mm widths, and in a curved version. Displaysense, UK display product specialists since 1978.
Specifications
Reference detail for the 6m double-sided straight tension fabric backdrop, the widest in the range. A single seamless stretch-fabric graphic prints on both faces and pulls drum-tight over a tool-free aluminium frame, certified to the B1 fire standard for indoor exhibition and event venues. Its aluminium frame is reusable, taking fresh covers as branding changes.
6m
Wall Width
Double
Sided Print
B1
Fire Rated
10 Min
Tool-Free Build
11.7kg
Total Weight
| Specification | Detail | What This Means for You |
|---|---|---|
| Display Type | Straight tension fabric backdrop | A flat, freestanding wall of branded fabric that sits flush to the back of your stand. No curve and minimal depth at all, so the floor in front stays open for everything that happens on the stand. |
| Width | 6000mm | The widest in the range, spanning the back of a double-width or island stand with one seamless graphic and no centre join. |
| Height | 2280mm | Tall enough to stand over presenters, counters and product plinths, and to mask the venue shell-scheme panelling behind the stand from view. |
| Depth | 400mm | Among the slimmest in the range, it hugs the back of the stand and gives up barely any of the floor you are paying for by the square metre. |
| Weight | 11.7kg | Light for its size, so one person can still lift, carry and load the whole stand into a car boot, yet stable on the floor once the feet are fitted. |
| Print Sides | Double-sided | Your artwork prints on both faces, so an island stand seen from every side shows branding on the reverse rather than a blank surface. |
| Printing Method | Dye-sublimation | Colour is driven into the polyester itself, staying vivid through years of folding, packing and reuse without lifting, flaking or going dull. |
| Fabric Material | Fire-retardant stretch polyester | A lightweight cloth that pulls tight over the wide frame for a crease-free surface with no visible seams, panel lines or joins. |
| Fire Rating | B1 (DIN 4102-1) | A certificate the big UK and European halls accept on sight, sparing you the on-site fireproofing and the contractor invoice that an untreated wall brings. |
| Frame Material | Aluminium with stabilising feet | Light, rigid and rust-proof, made to be built, struck and shipped over and over, and steadied on the floor by feet that ask for no weights or tape. |
| Assembly | Click-together, no tools | Frame sections connect by hand and the fabric slides on like a fitted cover then zips at the base, so one person builds even this width in around ten minutes. |
| Recommended Use | Indoor only | Made for indoor settings such as exhibition halls, conference suites, hotels, offices and retail floors. It carries no rating for outdoor wind or rain. |
Delivery & Returns
Print to order. We handle the artwork process with you.
We send a template, you submit your artwork, we produce once approved.
Delivery
Free
UK Mainland, Zone 1
Lead time
3 to 5 days
From artwork approval
Template sent
Within 24hrs
After your order is placed
Returns
Bespoke
Non-returnable unless faulty
How It Works
You
Us
-
1You
Place your order
Payment taken at this stage. Your lead time does not start until your artwork is approved.
-
2Us, within 24 hours
We email you a print template
A personalised template with full instructions. Please check your inbox and spam folder.
-
3You, next step
Submit your artwork
Follow the template instructions and email your artwork back to us.
-
4Us
We review and approve
If anything needs adjusting we will contact you. Once approved, your order enters production.
-
5Us
Production and dispatch
Lead time begins from artwork approval, not your order date.
Need it faster?
Express Print Service Available
Turnaround and pricing on a quote basis. Contact us before ordering.
Bespoke print orders are non-returnable. If your item arrives damaged or contains a manufacturing error, we will put it right. Returns policy · Delivery information
FAQs
Frequently Asked Questions About This 6m Tension Fabric Backdrop
Q: What is the best backdrop for a double-width or island exhibition stand?
A: That is the STU6000's whole purpose. As the widest straight backdrop in the range at 6000mm, it wraps a double booth or an island stand in one seamless double-sided graphic, rises 2280mm to bury the shell scheme, and goes up tool-free on a clicked-together aluminium frame in roughly ten minutes.
Q: Does a 6m fabric wall sag or wrinkle across the middle?
A: No, because the cover is tensioned rather than hung. Sewn to the full six metres and pulled drum-tight across the frame, it has no slack to gather into wrinkles and no centre seam to droop. A strung banner that wide would bow in the middle, while a stretched fabric wall keeps a flat, even face the whole way along.
Q: Do both sides of a large backdrop need printing?
A: For a stand people walk around, both faces earn their keep. An island or double booth is open on more than one side, so the back is in view nearly as often as the front. Dye-sublimation print on each face turns every approach into finished branding and leaves no bare panel facing the aisle behind.
Q: Is a wide tension fabric display right for a conference main stage?
A: It works very well there. A wide, seam-free fabric face sits cleanly behind a keynote or a panel and fills what the camera captures, which suits talks, awards shows and streamed sessions. No stage set is built, the feet hold it steady on the platform, and a few minutes clears it once the programme finishes.
Q: Can a large fabric wall work in a foyer, atrium or showroom?
A: Yes, in indoor settings. Hotel foyers, office atriums, showrooms and large retail floors all suit it, whether you are branding an arrival space or screening off a back area. Nothing fixes to the building because it free-stands on its feet, though it is built for inside use and is not rated against outdoor wind or rain.
Q: Can one person put up a display this wide?
A: Yes. The extra width only adds a few more sections to the click-together frame, not tools or lifting gear. Working along the frame, fitting the feet and sliding the zipped cover over the top takes one pair of hands about ten minutes, and the whole stand comes out of a single padded case.
Q: How wide and tall is it, and what stand size does it suit?
A: It runs 6000mm wide and 2280mm tall on a slim 400mm depth. That makes it the widest straight option in the range, sized for double-width booths, island stands and broad stages, while the height covers a standing presenter and the shell-scheme panels behind the stand.
Q: Should I choose the 6 metre or the 5 metre width?
A: The deciding factor is how wide your stand is. The 6 metre version is the widest, made to span a double or island stand in one wall, while the STU5000 covers a standard large booth at five metres. Frame, fabric and double-sided printing are shared, so measure your back wall and take the width that fills it without spilling past the bay.
Q: Is the cost worth it for a stand we change often?
A: For changing branding it tends to pay back. Only the printed cover carries the design, and the aluminium frame beneath is built to last, so each new look is a replacement cover rather than a fresh stand. Spread over a few campaigns, that holds the cost per event down even on the biggest display here.
Q: Will a large fabric backdrop pass venue fire rules?
A: It will. Certification to B1 under DIN 4102-1 is held across UK and European exhibition venues, so the fabric satisfies their fire rules the moment it arrives. On a wall this size the saving is real, since an uncertified display draws on-site fireproofing and the contractor fees attached to it.
Q: Is UK delivery free, and what arrives in the box?
A: Delivery to the UK mainland is free. Packed in the padded case are the aluminium frame, the double-sided printed fabric, the stabilising feet and a 1 year guarantee, and full-colour print on both faces is part of the price, proofed before it runs. Displaysense has been supplying display products since 1978.
Q: Does it come in narrower widths or a curved shape?
A: Yes. Narrower stands are covered by 2000mm, 2500mm, 3000mm, 4000mm and 5000mm straight widths, and the same display comes curved for a wraparound look. A fabric exhibition counter can be added alongside to complete the stand.
Knowledge Hub
Guides for Large Exhibition Stands and Show Impact
A wide backdrop gives a big stand its presence, but filling that space well takes more than square metres. The guides below look at pulling a crowd to a busy exhibition stand, weighing up UK venues for the best return, signage ideas that lift a whole event and choosing display graphics that pack down and travel between shows.
You may also like
Recently Viewed
Overall rating: 5.0 / 5 from 5 reviews.
AI Generated Review Summary
Summary topics
Review topics: [].
Review highlights
Reviews
Fantastic service! The team were
"Fantastic service! The team were so quick to create and send us our product for a tight turn around. We couldn't be happier with the product and the support during the ordering process."
Great item at a great
"Great item at a great price. Took a couple of days longer than advertised which wasn’t a problem to us but be aware if working to a very tight deadline."
Pop up unit
"Solid quality pop up unit Ordered 2 for our event - worked well"
Exhibition counter
"v happy . graphics look great for our exhibition ."
