Overview
Description
Specifications
Delivery & Returns
FAQs
Knowledge Hub
The Most Compact Double-Sided Feather Flag on a Ground Spike
When a pitch is small or the crowd stands close, a towering flag overshoots, and the FF2300DS answers with the most compact feather flag in the range on a spike for soft ground. Its curved glass fibre pole rises from a steel stake driven into grass or soil, so it stands with no base to carry, light enough to plant several close together along a short run. Each face is printed on its own panel around an opaque core, so the branding reads forward from both sides. Being low, it marks a stall, a border or an entrance at the height people actually stand and look, rather than sending the message far overhead. Best suited for market stalls, garden borders and small outdoor events where the ground is soft and the display works at close range.
Why This Feather Display Suits Small Outdoor Pitches
- A clean image on each side: Two printed panels are bonded around an opaque core, so each face carries its own correct graphic with no pale, reversed bleed-through on the back. Where a small crowd gathers close on every side, the branding stays right-way-round for all of them, and the print is part of the order, so you send art and it comes back finished.
- A stake that grips soft earth: In place of a weighted base, a steel spike pushes into grass or soil and the pole drops onto it, so the earth takes the load with nothing extra to lift. Light as it is, you can plant a few in a tight run in minutes, lining a stall row or a path edge with a matched set of branding.
- A small footprint at close range: The most compact feather sits low enough to read at the distance people actually stand, beside a stall, a counter or a border, rather than shooting overhead where a tall flag wastes its height on a close pitch and the message lands above where anyone is actually looking.
- A slim blade taller than it is wide: Even at this size the tapering feather lifts the message well above its narrow base, so it stands clear among stalls and planting while taking up almost no ground, lifting the message into view where a low board or a banner laid flat would be hidden by the crowd.
- A pole that gives in a gust: The glass fibre mast and its GRP whip bend and recover in the wind rather than standing rigid, so out in the open the flag holds in a breeze of up to 45 kph (28 mph) where a stiff pole would snap.
- Light to carry, fast to plant: With no base in the kit, the pole splits into sections and the fabric rolls into the bag supplied, so one person sets up or strikes several in minutes without tools. A 1 year guarantee comes with each flag against manufacturing faults.
Where This Compact Banner Earns Its Patch
| Market Stalls and Farmers Markets | Marks a stall on a grass market or green where a tall flag would loom over the pitch. The stake goes into the turf in seconds, the flag reads from both sides down the aisle, and it folds into a bag when the market packs up. |
| Garden Borders and Plant Displays | Calls out an offer or a new line among the beds and borders of a nursery or garden centre. It pushes into the soil between the planting, stands low without a base in the way, and lifts out without disturbing the display. |
| Small Outdoor Events and Fetes | Flags a stall, a gate or an activity at a fete, fair or school field. Several plant quickly along a short run to steer the crowd, each reads from both sides, and the whole set strikes in minutes at the close. |
| Sports Days and Club Touchlines | Brands a finish line, a sign-up point or a club stand on grass. The spike holds firm in the playing field, the low height keeps it clear of sightlines, and it travels light to fixtures and open days. |
| Roadside and Forecourt Verges | Catches passing trade from the grass strip beside a unit or a road. It stakes into the soft margin where a plate would topple, takes up next to no room, and reads to traffic from either direction. |
| Pop-Up Stalls and Stands on Turf | Sets up a quick brand presence on a grassed event field or showground. The stake needs only a push to plant, the compact flag suits a tight stand, and it packs down small to move to the next pitch. |
Standing It on Tarmac or Paving?
A spike needs soft ground to bite into. Where the pitch is a hard forecourt, paving or a car park, the same compact feather flag comes with a drive-on car base that a vehicle wheel holds down instead, giving you the same blade and print on a footing for hard surfaces.
Which base does your ground need? Call 01279460460 or drop us a line and we will help you choose, or price a run across pitches.
FF2300DS is a 2.3m double-sided glass fibre feather flag from Displaysense, the most compact in the range, supplied with a ground spike base and printing on both faces. Its differentiator is a small feather on a spike that drives into soft ground, with no weighted base to carry. Height 2260mm, width 690mm. A printed graphic of 690mm x 1860mm sits on each face. Built on a glass fibre pole finished with a GRP whip, a polyester flag and a steel ground spike; inner pole diameter 16.8mm. Holds its own in winds to 45 kph (28 mph), Beaufort Scale 6. Planted by hand in about two minutes, with a carry bag and a 1 year guarantee in the box. Suited to market stalls, garden borders, small outdoor events, sports days and grass verges. A single-sided version, a drive-on car base for hard surfaces, and taller 3.2m and 5m sizes are also available. Displaysense, UK display product specialists since 1978.
The back of a one-layer flag shows the print pale and reversed; this one does not, because it is made from two printed panels bonded around an opaque core. Each side then carries its own clean, correctly-read graphic, with no bleed-through from the other. Where a small crowd gathers close on every side of a flag, that two-faced build is what keeps the branding right-way-round for all of them, not just the people stood in front, which on a busy market or a packed field is most of the audience walking by.
A feather flag is the narrow blade that tapers to a tip, flown from a pole curving up its front edge. Even at this compact size it reaches taller than it is wide, a slim upright that lifts the message above a stall or a border. The pole is glass fibre, fine glass strands set in resin for a light, springy mast, and it is finished with a GRP whip that flexes in the wind. The inner pole diameter is 16.8mm across the range, so parts carry over between flags, letting you mix poles, spikes and spares across a whole set without hunting for matching fittings.
Holding it up is a steel ground spike, not a weighted base. It pushes down into grass or soil and the pole drops onto it, so the earth takes the load with nothing extra to carry or build. Light as it is, you can plant several in a tight run in minutes, lining a stall row or a path edge. The one rule is that a spike needs soft ground to grip, so on a hard forecourt or paving the drive-on car base is the version to choose instead, where the weight of a parked vehicle takes over the job the earth would otherwise do.
Colour is locked in by dye sublimation, a heat process that turns the inks to gas and drives them into the polyester so they dye the cloth rather than coat the surface. A graphic set this way keeps its colour through sun and rain at an outdoor pitch and survives being rolled away after each event without flaking. Each face prints across an area of 690mm by 1860mm. Send the artwork over, both sides are produced for you, and the flag goes up by hand in about two minutes, with no tools needed and nothing fiddly to work out on a windy field.
What Ships in Your Pack
- 1 x 2.3m double-sided glass fibre feather flag, printed on both faces from your artwork
- 1 x steel ground spike base
- 1 x carry bag
Lining a Market, Fete or Tour?
We print and supply feather flags in volume for market operators, garden retailers, event organisers and touring teams across the UK. For a matched run of flags, a set of stakes to line a path, or repeat artwork to a schedule, the team can quote it and turn it round to your dates.
Tell us the job: call 01279460460 or send the brief across and we will reply with a plan.
FF2300DS is a 2.3m double-sided glass fibre feather flag from Displaysense, the most compact in the range, supplied with a ground spike base and printing on both faces. Its differentiator is a small feather on a spike that drives into soft ground, with no weighted base to carry. Height 2260mm, width 690mm. A printed graphic of 690mm x 1860mm sits on each face. Built on a glass fibre pole finished with a GRP whip, a polyester flag and a steel ground spike; inner pole diameter 16.8mm. Holds its own in winds to 45 kph (28 mph), Beaufort Scale 6. Planted by hand in about two minutes, with a carry bag and a 1 year guarantee in the box. Suited to market stalls, garden borders, small outdoor events, sports days and grass verges. A single-sided version, a drive-on car base for hard surfaces, and taller 3.2m and 5m sizes are also available. Displaysense, UK display product specialists since 1978.
Technical detail for the most compact 2.3m double-sided feather flag with its ground spike base. Printing comes on both faces, the glass fibre mast carries a GRP whip for flex, and the wind rating runs to 45 kph. Sized to stake into grass at tight, close-range outdoor pitches.
| Specification | Detail | What This Means for You |
|---|---|---|
| Total Height | 2260mm (2.3m) | The most compact feather in the range, low enough to read at the range people stand from a stall or border, without wasting height on a close pitch where a tall flag overshoots. |
| Width | 690mm | A slim tapering blade on a tiny footprint, so several plant close together along a stall row or a path edge without crowding the ground that people walk on. |
| Display Type | Double-sided | Each face reads forwards, so a close crowd takes in the same branding from any side and never a reversed logo on the back. |
| Printed Graphic Size | 690mm x 1860mm per side | A full-blade canvas on each face, scaled to the compact flag. Set your artwork to this size and both sides return printed and ready to plant straight from the bag. |
| Pole Material | Glass fibre with GRP whip | Bends with the wind. The curved mast carries the feather shape, and the whip lets the pole flex in a gust and spring back unbroken. |
| Inner Pole Diameter | 16.8mm | The common fitting across the whole flag range, so poles, spikes and spares interchange freely with the other flags in your kit. |
| Base | Steel ground spike base | Pushes into grass or soil to anchor the flag with no weight to lift or carry. For tarmac or a forecourt, the drive-on car base is the one to choose instead. |
| Flag Material | Polyester, dye-sublimation printed | Colour dyes the fibres rather than coating them, so it holds through sun and rain outdoors and rolls away after each event without flaking. |
| Wind Resistance | Up to 45 kph (28 mph), Beaufort 6 | Holds firm in a strong breeze, the flexing mast letting the wind through instead of going over. Lift it out of the ground before severe or gale-force weather. |
| Assembly | No-tool, around 2 minutes | One person plants or strikes it in a couple of minutes, with nothing to screw or bolt and only the spike to press into the ground. |
| In the Box | Flag, ground spike base, carry bag | The flag, its spike and a bag for the fabric travel together, light enough to carry a handful out to a far corner of a field in one trip with no bases to drag along. |
| Guarantee | 1 year | Covered against manufacturing faults for a full year from delivery, for confidence across a season of markets and events. |
Print to order. We handle the artwork process with you.
We send a template, you submit your artwork, we produce once approved.
Delivery
Free
UK Mainland, Zone 1
Lead time
3 to 5 days
From artwork approval
Template sent
Within 24hrs
After your order is placed
Returns
Bespoke
Non-returnable unless faulty
How It Works
-
1You
Place your order
Payment taken at this stage. Your lead time does not start until your artwork is approved.
-
2Us, within 24 hours
We email you a print template
A personalised template with full instructions. Please check your inbox and spam folder.
-
3You, next step
Submit your artwork
Follow the template instructions and email your artwork back to us.
-
4Us
We review and approve
If anything needs adjusting we will contact you. Once approved, your order enters production.
-
5Us
Production and dispatch
Lead time begins from artwork approval, not your order date.
Need it faster?
Express Print Service Available
Turnaround and pricing on a quote basis. Contact us before ordering.
Bespoke print orders are non-returnable. If your item arrives damaged or contains a manufacturing error, we will put it right. Returns policy · Delivery information
Frequently Asked Questions About This 2.3m Feather Flag
Q: What is the most compact feather flag for a market stall on grass?
A: The FF2300DS is the most compact in the range, which suits a tight grass pitch. Its steel spike pushes into the turf so there is no base to carry, at 2.3m it reads at the range shoppers stand from a stall, and both faces are printed. Several plant close together to line a market aisle and steer shoppers along it.
Q: How does the ground spike hold the flag up?
A: The spike is a steel stake that pushes into grass or soil, and the pole drops onto it once it is set. The earth itself holds the flag, so nothing is weighted or bolted. Press it in with a hand or a foot, and a single pull lifts it back out when the stall or event closes.
Q: What ground does the spike work in?
A: It is made for soft ground, so the spike drives into grass, turf, soil or a planted border and holds the flag there. Push the stake fully in on a reasonably level patch and the earth grips it firm. It is not designed for tarmac, paving or concrete, where there is nothing for the spike to bite into.
Q: Is this outdoor marketing display suitable for garden centres and fetes?
A: Yes. Garden centres push it into a border or bed to flag a line, while a fete uses it to mark a stall or a gate on the field. The spike grips soil and turf, the compact height stays at eye level on a close pitch, and the double-sided print reads from both sides.
Q: Can this feather flag be planted in a row along a path?
A: Yes, that is one of its strengths at this size. Being light with only a spike to push in, several go up quickly along a short run to line a walkway or a stall row. Each reads from both sides, and the whole set strikes in minutes and packs into bags to move on.
Q: How fast is it to plant, and can one person carry several?
A: Each one plants in about two minutes by hand. You join the pole sections, sleeve the printed banner over them, and push the spike into the ground. With no weighted base in the kit they stay light, so one person carries a handful out to a field and sets them without tools.
Q: What height is it, and how big is the printed area?
A: It stands 2260mm, around 2.3m, the most compact height in the feather range. Each face prints across 690mm x 1860mm, the size to set your artwork at. The slim blade lifts the message above a stall while taking up barely any ground, so it reads clearly without blocking the pitch behind it.
Q: What is the difference between the double-sided FF2300DS and single-sided FF2300SP?
A: Both use the same ground spike, so the print is the difference. The FF2300DS prints a forward-reading graphic on each face around a blockout core, reading correctly from both sides. The single-sided FF2300SP prints one face, shows a faint reversed image on the back, and costs less. Pick double-sided where a close crowd sees the flag from all around.
Q: Is double-sided needed for a small pitch?
A: It depends where it stands. On an open stall or border where people pass on both sides, double-sided keeps the branding forward-facing from each angle. Set against a stall back or a fence where only the front shows, a single-sided promotional flag does the job for less.
Q: How does it handle wind and rain outdoors?
A: Well, within its rating. The springy glass fibre pole lets the wind through rather than fighting it, so the flag holds in a breeze up to 45 kph (28 mph), and the dye-sublimation print is set into the fabric so rain and sun leave the colour alone. In severe or gale-force weather, lift it out to be safe.
Q: Is delivery free on this outdoor marketing display?
A: Yes. Delivery to the UK mainland is free as standard. Displaysense has supplied display products to UK businesses since 1978 and ships from its Hertfordshire base. The flag reaches you printed and ready to build, with the ground spike and carry bag in the same box.
Q: Are there other sizes or versions of this feather flag?
A: Yes. The same feather flag is made in taller 3.2m and 5m heights for more reach across a field, and in a single-sided version for spots seen from one direction only. All share the same glass fibre pole, GRP whip and dye-sublimation print, so sizes mix easily across a set.
Guides for Feather Flags and Outdoor Stall Visibility
A small feather flag is a cheap way to claim a patch on a busy field, but the spot you pick and the message you fly decide how many people it draws over. The guides below cover catching the eye at events, standing out on a packed market or show field, and matching the format to the setting, so a run of flags pulls the crowd in rather than blending into the stalls.
- 10 Event Signage Ideas to Grab Attention at Your Event
- How to Attract Attention at Your Exhibition Stand
- Market Stall Display Ideas to Grab Attention
- How to Choose the Right Pop-Up Banner for Your Next Event
Downloads
Double-Sided 2.3m Glass Fibre Feather Flag with Ground Spike BaseOverview
The Most Compact Double-Sided Feather Flag on a Ground Spike
When a pitch is small or the crowd stands close, a towering flag overshoots, and the FF2300DS answers with the most compact feather flag in the range on a spike for soft ground. Its curved glass fibre pole rises from a steel stake driven into grass or soil, so it stands with no base to carry, light enough to plant several close together along a short run. Each face is printed on its own panel around an opaque core, so the branding reads forward from both sides. Being low, it marks a stall, a border or an entrance at the height people actually stand and look, rather than sending the message far overhead. Best suited for market stalls, garden borders and small outdoor events where the ground is soft and the display works at close range.
Why This Feather Display Suits Small Outdoor Pitches
- A clean image on each side: Two printed panels are bonded around an opaque core, so each face carries its own correct graphic with no pale, reversed bleed-through on the back. Where a small crowd gathers close on every side, the branding stays right-way-round for all of them, and the print is part of the order, so you send art and it comes back finished.
- A stake that grips soft earth: In place of a weighted base, a steel spike pushes into grass or soil and the pole drops onto it, so the earth takes the load with nothing extra to lift. Light as it is, you can plant a few in a tight run in minutes, lining a stall row or a path edge with a matched set of branding.
- A small footprint at close range: The most compact feather sits low enough to read at the distance people actually stand, beside a stall, a counter or a border, rather than shooting overhead where a tall flag wastes its height on a close pitch and the message lands above where anyone is actually looking.
- A slim blade taller than it is wide: Even at this size the tapering feather lifts the message well above its narrow base, so it stands clear among stalls and planting while taking up almost no ground, lifting the message into view where a low board or a banner laid flat would be hidden by the crowd.
- A pole that gives in a gust: The glass fibre mast and its GRP whip bend and recover in the wind rather than standing rigid, so out in the open the flag holds in a breeze of up to 45 kph (28 mph) where a stiff pole would snap.
- Light to carry, fast to plant: With no base in the kit, the pole splits into sections and the fabric rolls into the bag supplied, so one person sets up or strikes several in minutes without tools. A 1 year guarantee comes with each flag against manufacturing faults.
Where This Compact Banner Earns Its Patch
| Market Stalls and Farmers Markets | Marks a stall on a grass market or green where a tall flag would loom over the pitch. The stake goes into the turf in seconds, the flag reads from both sides down the aisle, and it folds into a bag when the market packs up. |
| Garden Borders and Plant Displays | Calls out an offer or a new line among the beds and borders of a nursery or garden centre. It pushes into the soil between the planting, stands low without a base in the way, and lifts out without disturbing the display. |
| Small Outdoor Events and Fetes | Flags a stall, a gate or an activity at a fete, fair or school field. Several plant quickly along a short run to steer the crowd, each reads from both sides, and the whole set strikes in minutes at the close. |
| Sports Days and Club Touchlines | Brands a finish line, a sign-up point or a club stand on grass. The spike holds firm in the playing field, the low height keeps it clear of sightlines, and it travels light to fixtures and open days. |
| Roadside and Forecourt Verges | Catches passing trade from the grass strip beside a unit or a road. It stakes into the soft margin where a plate would topple, takes up next to no room, and reads to traffic from either direction. |
| Pop-Up Stalls and Stands on Turf | Sets up a quick brand presence on a grassed event field or showground. The stake needs only a push to plant, the compact flag suits a tight stand, and it packs down small to move to the next pitch. |
Standing It on Tarmac or Paving?
A spike needs soft ground to bite into. Where the pitch is a hard forecourt, paving or a car park, the same compact feather flag comes with a drive-on car base that a vehicle wheel holds down instead, giving you the same blade and print on a footing for hard surfaces.
Which base does your ground need? Call 01279460460 or drop us a line and we will help you choose, or price a run across pitches.
FF2300DS is a 2.3m double-sided glass fibre feather flag from Displaysense, the most compact in the range, supplied with a ground spike base and printing on both faces. Its differentiator is a small feather on a spike that drives into soft ground, with no weighted base to carry. Height 2260mm, width 690mm. A printed graphic of 690mm x 1860mm sits on each face. Built on a glass fibre pole finished with a GRP whip, a polyester flag and a steel ground spike; inner pole diameter 16.8mm. Holds its own in winds to 45 kph (28 mph), Beaufort Scale 6. Planted by hand in about two minutes, with a carry bag and a 1 year guarantee in the box. Suited to market stalls, garden borders, small outdoor events, sports days and grass verges. A single-sided version, a drive-on car base for hard surfaces, and taller 3.2m and 5m sizes are also available. Displaysense, UK display product specialists since 1978.
Description
The back of a one-layer flag shows the print pale and reversed; this one does not, because it is made from two printed panels bonded around an opaque core. Each side then carries its own clean, correctly-read graphic, with no bleed-through from the other. Where a small crowd gathers close on every side of a flag, that two-faced build is what keeps the branding right-way-round for all of them, not just the people stood in front, which on a busy market or a packed field is most of the audience walking by.
A feather flag is the narrow blade that tapers to a tip, flown from a pole curving up its front edge. Even at this compact size it reaches taller than it is wide, a slim upright that lifts the message above a stall or a border. The pole is glass fibre, fine glass strands set in resin for a light, springy mast, and it is finished with a GRP whip that flexes in the wind. The inner pole diameter is 16.8mm across the range, so parts carry over between flags, letting you mix poles, spikes and spares across a whole set without hunting for matching fittings.
Holding it up is a steel ground spike, not a weighted base. It pushes down into grass or soil and the pole drops onto it, so the earth takes the load with nothing extra to carry or build. Light as it is, you can plant several in a tight run in minutes, lining a stall row or a path edge. The one rule is that a spike needs soft ground to grip, so on a hard forecourt or paving the drive-on car base is the version to choose instead, where the weight of a parked vehicle takes over the job the earth would otherwise do.
Colour is locked in by dye sublimation, a heat process that turns the inks to gas and drives them into the polyester so they dye the cloth rather than coat the surface. A graphic set this way keeps its colour through sun and rain at an outdoor pitch and survives being rolled away after each event without flaking. Each face prints across an area of 690mm by 1860mm. Send the artwork over, both sides are produced for you, and the flag goes up by hand in about two minutes, with no tools needed and nothing fiddly to work out on a windy field.
What Ships in Your Pack
- 1 x 2.3m double-sided glass fibre feather flag, printed on both faces from your artwork
- 1 x steel ground spike base
- 1 x carry bag
Lining a Market, Fete or Tour?
We print and supply feather flags in volume for market operators, garden retailers, event organisers and touring teams across the UK. For a matched run of flags, a set of stakes to line a path, or repeat artwork to a schedule, the team can quote it and turn it round to your dates.
Tell us the job: call 01279460460 or send the brief across and we will reply with a plan.
FF2300DS is a 2.3m double-sided glass fibre feather flag from Displaysense, the most compact in the range, supplied with a ground spike base and printing on both faces. Its differentiator is a small feather on a spike that drives into soft ground, with no weighted base to carry. Height 2260mm, width 690mm. A printed graphic of 690mm x 1860mm sits on each face. Built on a glass fibre pole finished with a GRP whip, a polyester flag and a steel ground spike; inner pole diameter 16.8mm. Holds its own in winds to 45 kph (28 mph), Beaufort Scale 6. Planted by hand in about two minutes, with a carry bag and a 1 year guarantee in the box. Suited to market stalls, garden borders, small outdoor events, sports days and grass verges. A single-sided version, a drive-on car base for hard surfaces, and taller 3.2m and 5m sizes are also available. Displaysense, UK display product specialists since 1978.
Specifications
Technical detail for the most compact 2.3m double-sided feather flag with its ground spike base. Printing comes on both faces, the glass fibre mast carries a GRP whip for flex, and the wind rating runs to 45 kph. Sized to stake into grass at tight, close-range outdoor pitches.
| Specification | Detail | What This Means for You |
|---|---|---|
| Total Height | 2260mm (2.3m) | The most compact feather in the range, low enough to read at the range people stand from a stall or border, without wasting height on a close pitch where a tall flag overshoots. |
| Width | 690mm | A slim tapering blade on a tiny footprint, so several plant close together along a stall row or a path edge without crowding the ground that people walk on. |
| Display Type | Double-sided | Each face reads forwards, so a close crowd takes in the same branding from any side and never a reversed logo on the back. |
| Printed Graphic Size | 690mm x 1860mm per side | A full-blade canvas on each face, scaled to the compact flag. Set your artwork to this size and both sides return printed and ready to plant straight from the bag. |
| Pole Material | Glass fibre with GRP whip | Bends with the wind. The curved mast carries the feather shape, and the whip lets the pole flex in a gust and spring back unbroken. |
| Inner Pole Diameter | 16.8mm | The common fitting across the whole flag range, so poles, spikes and spares interchange freely with the other flags in your kit. |
| Base | Steel ground spike base | Pushes into grass or soil to anchor the flag with no weight to lift or carry. For tarmac or a forecourt, the drive-on car base is the one to choose instead. |
| Flag Material | Polyester, dye-sublimation printed | Colour dyes the fibres rather than coating them, so it holds through sun and rain outdoors and rolls away after each event without flaking. |
| Wind Resistance | Up to 45 kph (28 mph), Beaufort 6 | Holds firm in a strong breeze, the flexing mast letting the wind through instead of going over. Lift it out of the ground before severe or gale-force weather. |
| Assembly | No-tool, around 2 minutes | One person plants or strikes it in a couple of minutes, with nothing to screw or bolt and only the spike to press into the ground. |
| In the Box | Flag, ground spike base, carry bag | The flag, its spike and a bag for the fabric travel together, light enough to carry a handful out to a far corner of a field in one trip with no bases to drag along. |
| Guarantee | 1 year | Covered against manufacturing faults for a full year from delivery, for confidence across a season of markets and events. |
Delivery & Returns
Print to order. We handle the artwork process with you.
We send a template, you submit your artwork, we produce once approved.
Delivery
Free
UK Mainland, Zone 1
Lead time
3 to 5 days
From artwork approval
Template sent
Within 24hrs
After your order is placed
Returns
Bespoke
Non-returnable unless faulty
How It Works
-
1You
Place your order
Payment taken at this stage. Your lead time does not start until your artwork is approved.
-
2Us, within 24 hours
We email you a print template
A personalised template with full instructions. Please check your inbox and spam folder.
-
3You, next step
Submit your artwork
Follow the template instructions and email your artwork back to us.
-
4Us
We review and approve
If anything needs adjusting we will contact you. Once approved, your order enters production.
-
5Us
Production and dispatch
Lead time begins from artwork approval, not your order date.
Need it faster?
Express Print Service Available
Turnaround and pricing on a quote basis. Contact us before ordering.
Bespoke print orders are non-returnable. If your item arrives damaged or contains a manufacturing error, we will put it right. Returns policy · Delivery information
FAQs
Frequently Asked Questions About This 2.3m Feather Flag
Q: What is the most compact feather flag for a market stall on grass?
A: The FF2300DS is the most compact in the range, which suits a tight grass pitch. Its steel spike pushes into the turf so there is no base to carry, at 2.3m it reads at the range shoppers stand from a stall, and both faces are printed. Several plant close together to line a market aisle and steer shoppers along it.
Q: How does the ground spike hold the flag up?
A: The spike is a steel stake that pushes into grass or soil, and the pole drops onto it once it is set. The earth itself holds the flag, so nothing is weighted or bolted. Press it in with a hand or a foot, and a single pull lifts it back out when the stall or event closes.
Q: What ground does the spike work in?
A: It is made for soft ground, so the spike drives into grass, turf, soil or a planted border and holds the flag there. Push the stake fully in on a reasonably level patch and the earth grips it firm. It is not designed for tarmac, paving or concrete, where there is nothing for the spike to bite into.
Q: Is this outdoor marketing display suitable for garden centres and fetes?
A: Yes. Garden centres push it into a border or bed to flag a line, while a fete uses it to mark a stall or a gate on the field. The spike grips soil and turf, the compact height stays at eye level on a close pitch, and the double-sided print reads from both sides.
Q: Can this feather flag be planted in a row along a path?
A: Yes, that is one of its strengths at this size. Being light with only a spike to push in, several go up quickly along a short run to line a walkway or a stall row. Each reads from both sides, and the whole set strikes in minutes and packs into bags to move on.
Q: How fast is it to plant, and can one person carry several?
A: Each one plants in about two minutes by hand. You join the pole sections, sleeve the printed banner over them, and push the spike into the ground. With no weighted base in the kit they stay light, so one person carries a handful out to a field and sets them without tools.
Q: What height is it, and how big is the printed area?
A: It stands 2260mm, around 2.3m, the most compact height in the feather range. Each face prints across 690mm x 1860mm, the size to set your artwork at. The slim blade lifts the message above a stall while taking up barely any ground, so it reads clearly without blocking the pitch behind it.
Q: What is the difference between the double-sided FF2300DS and single-sided FF2300SP?
A: Both use the same ground spike, so the print is the difference. The FF2300DS prints a forward-reading graphic on each face around a blockout core, reading correctly from both sides. The single-sided FF2300SP prints one face, shows a faint reversed image on the back, and costs less. Pick double-sided where a close crowd sees the flag from all around.
Q: Is double-sided needed for a small pitch?
A: It depends where it stands. On an open stall or border where people pass on both sides, double-sided keeps the branding forward-facing from each angle. Set against a stall back or a fence where only the front shows, a single-sided promotional flag does the job for less.
Q: How does it handle wind and rain outdoors?
A: Well, within its rating. The springy glass fibre pole lets the wind through rather than fighting it, so the flag holds in a breeze up to 45 kph (28 mph), and the dye-sublimation print is set into the fabric so rain and sun leave the colour alone. In severe or gale-force weather, lift it out to be safe.
Q: Is delivery free on this outdoor marketing display?
A: Yes. Delivery to the UK mainland is free as standard. Displaysense has supplied display products to UK businesses since 1978 and ships from its Hertfordshire base. The flag reaches you printed and ready to build, with the ground spike and carry bag in the same box.
Q: Are there other sizes or versions of this feather flag?
A: Yes. The same feather flag is made in taller 3.2m and 5m heights for more reach across a field, and in a single-sided version for spots seen from one direction only. All share the same glass fibre pole, GRP whip and dye-sublimation print, so sizes mix easily across a set.
Knowledge Hub
Guides for Feather Flags and Outdoor Stall Visibility
A small feather flag is a cheap way to claim a patch on a busy field, but the spot you pick and the message you fly decide how many people it draws over. The guides below cover catching the eye at events, standing out on a packed market or show field, and matching the format to the setting, so a run of flags pulls the crowd in rather than blending into the stalls.
- 10 Event Signage Ideas to Grab Attention at Your Event
- How to Attract Attention at Your Exhibition Stand
- Market Stall Display Ideas to Grab Attention
- How to Choose the Right Pop-Up Banner for Your Next Event
Downloads
Double-Sided 2.3m Glass Fibre Feather Flag with Ground Spike BaseDouble-Sided Glass Fibre Feather Flag with Ground Spike Base inc. Graphic Printing - 2.3m
| Quantity | Discount | Save |
|---|---|---|
| 1 - 4 | 0% off | £0.00 |
| 5 - 9 | 5% off | £7.45 |
| 10 + | 8% off | £11.92 |
Overview
Description
Specifications
Delivery & Returns
FAQs
Knowledge Hub
The Most Compact Double-Sided Feather Flag on a Ground Spike
When a pitch is small or the crowd stands close, a towering flag overshoots, and the FF2300DS answers with the most compact feather flag in the range on a spike for soft ground. Its curved glass fibre pole rises from a steel stake driven into grass or soil, so it stands with no base to carry, light enough to plant several close together along a short run. Each face is printed on its own panel around an opaque core, so the branding reads forward from both sides. Being low, it marks a stall, a border or an entrance at the height people actually stand and look, rather than sending the message far overhead. Best suited for market stalls, garden borders and small outdoor events where the ground is soft and the display works at close range.
Why This Feather Display Suits Small Outdoor Pitches
- A clean image on each side: Two printed panels are bonded around an opaque core, so each face carries its own correct graphic with no pale, reversed bleed-through on the back. Where a small crowd gathers close on every side, the branding stays right-way-round for all of them, and the print is part of the order, so you send art and it comes back finished.
- A stake that grips soft earth: In place of a weighted base, a steel spike pushes into grass or soil and the pole drops onto it, so the earth takes the load with nothing extra to lift. Light as it is, you can plant a few in a tight run in minutes, lining a stall row or a path edge with a matched set of branding.
- A small footprint at close range: The most compact feather sits low enough to read at the distance people actually stand, beside a stall, a counter or a border, rather than shooting overhead where a tall flag wastes its height on a close pitch and the message lands above where anyone is actually looking.
- A slim blade taller than it is wide: Even at this size the tapering feather lifts the message well above its narrow base, so it stands clear among stalls and planting while taking up almost no ground, lifting the message into view where a low board or a banner laid flat would be hidden by the crowd.
- A pole that gives in a gust: The glass fibre mast and its GRP whip bend and recover in the wind rather than standing rigid, so out in the open the flag holds in a breeze of up to 45 kph (28 mph) where a stiff pole would snap.
- Light to carry, fast to plant: With no base in the kit, the pole splits into sections and the fabric rolls into the bag supplied, so one person sets up or strikes several in minutes without tools. A 1 year guarantee comes with each flag against manufacturing faults.
Where This Compact Banner Earns Its Patch
| Market Stalls and Farmers Markets | Marks a stall on a grass market or green where a tall flag would loom over the pitch. The stake goes into the turf in seconds, the flag reads from both sides down the aisle, and it folds into a bag when the market packs up. |
| Garden Borders and Plant Displays | Calls out an offer or a new line among the beds and borders of a nursery or garden centre. It pushes into the soil between the planting, stands low without a base in the way, and lifts out without disturbing the display. |
| Small Outdoor Events and Fetes | Flags a stall, a gate or an activity at a fete, fair or school field. Several plant quickly along a short run to steer the crowd, each reads from both sides, and the whole set strikes in minutes at the close. |
| Sports Days and Club Touchlines | Brands a finish line, a sign-up point or a club stand on grass. The spike holds firm in the playing field, the low height keeps it clear of sightlines, and it travels light to fixtures and open days. |
| Roadside and Forecourt Verges | Catches passing trade from the grass strip beside a unit or a road. It stakes into the soft margin where a plate would topple, takes up next to no room, and reads to traffic from either direction. |
| Pop-Up Stalls and Stands on Turf | Sets up a quick brand presence on a grassed event field or showground. The stake needs only a push to plant, the compact flag suits a tight stand, and it packs down small to move to the next pitch. |
Standing It on Tarmac or Paving?
A spike needs soft ground to bite into. Where the pitch is a hard forecourt, paving or a car park, the same compact feather flag comes with a drive-on car base that a vehicle wheel holds down instead, giving you the same blade and print on a footing for hard surfaces.
Which base does your ground need? Call 01279460460 or drop us a line and we will help you choose, or price a run across pitches.
FF2300DS is a 2.3m double-sided glass fibre feather flag from Displaysense, the most compact in the range, supplied with a ground spike base and printing on both faces. Its differentiator is a small feather on a spike that drives into soft ground, with no weighted base to carry. Height 2260mm, width 690mm. A printed graphic of 690mm x 1860mm sits on each face. Built on a glass fibre pole finished with a GRP whip, a polyester flag and a steel ground spike; inner pole diameter 16.8mm. Holds its own in winds to 45 kph (28 mph), Beaufort Scale 6. Planted by hand in about two minutes, with a carry bag and a 1 year guarantee in the box. Suited to market stalls, garden borders, small outdoor events, sports days and grass verges. A single-sided version, a drive-on car base for hard surfaces, and taller 3.2m and 5m sizes are also available. Displaysense, UK display product specialists since 1978.
The back of a one-layer flag shows the print pale and reversed; this one does not, because it is made from two printed panels bonded around an opaque core. Each side then carries its own clean, correctly-read graphic, with no bleed-through from the other. Where a small crowd gathers close on every side of a flag, that two-faced build is what keeps the branding right-way-round for all of them, not just the people stood in front, which on a busy market or a packed field is most of the audience walking by.
A feather flag is the narrow blade that tapers to a tip, flown from a pole curving up its front edge. Even at this compact size it reaches taller than it is wide, a slim upright that lifts the message above a stall or a border. The pole is glass fibre, fine glass strands set in resin for a light, springy mast, and it is finished with a GRP whip that flexes in the wind. The inner pole diameter is 16.8mm across the range, so parts carry over between flags, letting you mix poles, spikes and spares across a whole set without hunting for matching fittings.
Holding it up is a steel ground spike, not a weighted base. It pushes down into grass or soil and the pole drops onto it, so the earth takes the load with nothing extra to carry or build. Light as it is, you can plant several in a tight run in minutes, lining a stall row or a path edge. The one rule is that a spike needs soft ground to grip, so on a hard forecourt or paving the drive-on car base is the version to choose instead, where the weight of a parked vehicle takes over the job the earth would otherwise do.
Colour is locked in by dye sublimation, a heat process that turns the inks to gas and drives them into the polyester so they dye the cloth rather than coat the surface. A graphic set this way keeps its colour through sun and rain at an outdoor pitch and survives being rolled away after each event without flaking. Each face prints across an area of 690mm by 1860mm. Send the artwork over, both sides are produced for you, and the flag goes up by hand in about two minutes, with no tools needed and nothing fiddly to work out on a windy field.
What Ships in Your Pack
- 1 x 2.3m double-sided glass fibre feather flag, printed on both faces from your artwork
- 1 x steel ground spike base
- 1 x carry bag
Lining a Market, Fete or Tour?
We print and supply feather flags in volume for market operators, garden retailers, event organisers and touring teams across the UK. For a matched run of flags, a set of stakes to line a path, or repeat artwork to a schedule, the team can quote it and turn it round to your dates.
Tell us the job: call 01279460460 or send the brief across and we will reply with a plan.
FF2300DS is a 2.3m double-sided glass fibre feather flag from Displaysense, the most compact in the range, supplied with a ground spike base and printing on both faces. Its differentiator is a small feather on a spike that drives into soft ground, with no weighted base to carry. Height 2260mm, width 690mm. A printed graphic of 690mm x 1860mm sits on each face. Built on a glass fibre pole finished with a GRP whip, a polyester flag and a steel ground spike; inner pole diameter 16.8mm. Holds its own in winds to 45 kph (28 mph), Beaufort Scale 6. Planted by hand in about two minutes, with a carry bag and a 1 year guarantee in the box. Suited to market stalls, garden borders, small outdoor events, sports days and grass verges. A single-sided version, a drive-on car base for hard surfaces, and taller 3.2m and 5m sizes are also available. Displaysense, UK display product specialists since 1978.
Technical detail for the most compact 2.3m double-sided feather flag with its ground spike base. Printing comes on both faces, the glass fibre mast carries a GRP whip for flex, and the wind rating runs to 45 kph. Sized to stake into grass at tight, close-range outdoor pitches.
| Specification | Detail | What This Means for You |
|---|---|---|
| Total Height | 2260mm (2.3m) | The most compact feather in the range, low enough to read at the range people stand from a stall or border, without wasting height on a close pitch where a tall flag overshoots. |
| Width | 690mm | A slim tapering blade on a tiny footprint, so several plant close together along a stall row or a path edge without crowding the ground that people walk on. |
| Display Type | Double-sided | Each face reads forwards, so a close crowd takes in the same branding from any side and never a reversed logo on the back. |
| Printed Graphic Size | 690mm x 1860mm per side | A full-blade canvas on each face, scaled to the compact flag. Set your artwork to this size and both sides return printed and ready to plant straight from the bag. |
| Pole Material | Glass fibre with GRP whip | Bends with the wind. The curved mast carries the feather shape, and the whip lets the pole flex in a gust and spring back unbroken. |
| Inner Pole Diameter | 16.8mm | The common fitting across the whole flag range, so poles, spikes and spares interchange freely with the other flags in your kit. |
| Base | Steel ground spike base | Pushes into grass or soil to anchor the flag with no weight to lift or carry. For tarmac or a forecourt, the drive-on car base is the one to choose instead. |
| Flag Material | Polyester, dye-sublimation printed | Colour dyes the fibres rather than coating them, so it holds through sun and rain outdoors and rolls away after each event without flaking. |
| Wind Resistance | Up to 45 kph (28 mph), Beaufort 6 | Holds firm in a strong breeze, the flexing mast letting the wind through instead of going over. Lift it out of the ground before severe or gale-force weather. |
| Assembly | No-tool, around 2 minutes | One person plants or strikes it in a couple of minutes, with nothing to screw or bolt and only the spike to press into the ground. |
| In the Box | Flag, ground spike base, carry bag | The flag, its spike and a bag for the fabric travel together, light enough to carry a handful out to a far corner of a field in one trip with no bases to drag along. |
| Guarantee | 1 year | Covered against manufacturing faults for a full year from delivery, for confidence across a season of markets and events. |
Print to order. We handle the artwork process with you.
We send a template, you submit your artwork, we produce once approved.
Delivery
Free
UK Mainland, Zone 1
Lead time
3 to 5 days
From artwork approval
Template sent
Within 24hrs
After your order is placed
Returns
Bespoke
Non-returnable unless faulty
How It Works
-
1You
Place your order
Payment taken at this stage. Your lead time does not start until your artwork is approved.
-
2Us, within 24 hours
We email you a print template
A personalised template with full instructions. Please check your inbox and spam folder.
-
3You, next step
Submit your artwork
Follow the template instructions and email your artwork back to us.
-
4Us
We review and approve
If anything needs adjusting we will contact you. Once approved, your order enters production.
-
5Us
Production and dispatch
Lead time begins from artwork approval, not your order date.
Need it faster?
Express Print Service Available
Turnaround and pricing on a quote basis. Contact us before ordering.
Bespoke print orders are non-returnable. If your item arrives damaged or contains a manufacturing error, we will put it right. Returns policy · Delivery information
Frequently Asked Questions About This 2.3m Feather Flag
Q: What is the most compact feather flag for a market stall on grass?
A: The FF2300DS is the most compact in the range, which suits a tight grass pitch. Its steel spike pushes into the turf so there is no base to carry, at 2.3m it reads at the range shoppers stand from a stall, and both faces are printed. Several plant close together to line a market aisle and steer shoppers along it.
Q: How does the ground spike hold the flag up?
A: The spike is a steel stake that pushes into grass or soil, and the pole drops onto it once it is set. The earth itself holds the flag, so nothing is weighted or bolted. Press it in with a hand or a foot, and a single pull lifts it back out when the stall or event closes.
Q: What ground does the spike work in?
A: It is made for soft ground, so the spike drives into grass, turf, soil or a planted border and holds the flag there. Push the stake fully in on a reasonably level patch and the earth grips it firm. It is not designed for tarmac, paving or concrete, where there is nothing for the spike to bite into.
Q: Is this outdoor marketing display suitable for garden centres and fetes?
A: Yes. Garden centres push it into a border or bed to flag a line, while a fete uses it to mark a stall or a gate on the field. The spike grips soil and turf, the compact height stays at eye level on a close pitch, and the double-sided print reads from both sides.
Q: Can this feather flag be planted in a row along a path?
A: Yes, that is one of its strengths at this size. Being light with only a spike to push in, several go up quickly along a short run to line a walkway or a stall row. Each reads from both sides, and the whole set strikes in minutes and packs into bags to move on.
Q: How fast is it to plant, and can one person carry several?
A: Each one plants in about two minutes by hand. You join the pole sections, sleeve the printed banner over them, and push the spike into the ground. With no weighted base in the kit they stay light, so one person carries a handful out to a field and sets them without tools.
Q: What height is it, and how big is the printed area?
A: It stands 2260mm, around 2.3m, the most compact height in the feather range. Each face prints across 690mm x 1860mm, the size to set your artwork at. The slim blade lifts the message above a stall while taking up barely any ground, so it reads clearly without blocking the pitch behind it.
Q: What is the difference between the double-sided FF2300DS and single-sided FF2300SP?
A: Both use the same ground spike, so the print is the difference. The FF2300DS prints a forward-reading graphic on each face around a blockout core, reading correctly from both sides. The single-sided FF2300SP prints one face, shows a faint reversed image on the back, and costs less. Pick double-sided where a close crowd sees the flag from all around.
Q: Is double-sided needed for a small pitch?
A: It depends where it stands. On an open stall or border where people pass on both sides, double-sided keeps the branding forward-facing from each angle. Set against a stall back or a fence where only the front shows, a single-sided promotional flag does the job for less.
Q: How does it handle wind and rain outdoors?
A: Well, within its rating. The springy glass fibre pole lets the wind through rather than fighting it, so the flag holds in a breeze up to 45 kph (28 mph), and the dye-sublimation print is set into the fabric so rain and sun leave the colour alone. In severe or gale-force weather, lift it out to be safe.
Q: Is delivery free on this outdoor marketing display?
A: Yes. Delivery to the UK mainland is free as standard. Displaysense has supplied display products to UK businesses since 1978 and ships from its Hertfordshire base. The flag reaches you printed and ready to build, with the ground spike and carry bag in the same box.
Q: Are there other sizes or versions of this feather flag?
A: Yes. The same feather flag is made in taller 3.2m and 5m heights for more reach across a field, and in a single-sided version for spots seen from one direction only. All share the same glass fibre pole, GRP whip and dye-sublimation print, so sizes mix easily across a set.
Guides for Feather Flags and Outdoor Stall Visibility
A small feather flag is a cheap way to claim a patch on a busy field, but the spot you pick and the message you fly decide how many people it draws over. The guides below cover catching the eye at events, standing out on a packed market or show field, and matching the format to the setting, so a run of flags pulls the crowd in rather than blending into the stalls.
- 10 Event Signage Ideas to Grab Attention at Your Event
- How to Attract Attention at Your Exhibition Stand
- Market Stall Display Ideas to Grab Attention
- How to Choose the Right Pop-Up Banner for Your Next Event
Downloads
Double-Sided 2.3m Glass Fibre Feather Flag with Ground Spike BaseOverview
The Most Compact Double-Sided Feather Flag on a Ground Spike
When a pitch is small or the crowd stands close, a towering flag overshoots, and the FF2300DS answers with the most compact feather flag in the range on a spike for soft ground. Its curved glass fibre pole rises from a steel stake driven into grass or soil, so it stands with no base to carry, light enough to plant several close together along a short run. Each face is printed on its own panel around an opaque core, so the branding reads forward from both sides. Being low, it marks a stall, a border or an entrance at the height people actually stand and look, rather than sending the message far overhead. Best suited for market stalls, garden borders and small outdoor events where the ground is soft and the display works at close range.
Why This Feather Display Suits Small Outdoor Pitches
- A clean image on each side: Two printed panels are bonded around an opaque core, so each face carries its own correct graphic with no pale, reversed bleed-through on the back. Where a small crowd gathers close on every side, the branding stays right-way-round for all of them, and the print is part of the order, so you send art and it comes back finished.
- A stake that grips soft earth: In place of a weighted base, a steel spike pushes into grass or soil and the pole drops onto it, so the earth takes the load with nothing extra to lift. Light as it is, you can plant a few in a tight run in minutes, lining a stall row or a path edge with a matched set of branding.
- A small footprint at close range: The most compact feather sits low enough to read at the distance people actually stand, beside a stall, a counter or a border, rather than shooting overhead where a tall flag wastes its height on a close pitch and the message lands above where anyone is actually looking.
- A slim blade taller than it is wide: Even at this size the tapering feather lifts the message well above its narrow base, so it stands clear among stalls and planting while taking up almost no ground, lifting the message into view where a low board or a banner laid flat would be hidden by the crowd.
- A pole that gives in a gust: The glass fibre mast and its GRP whip bend and recover in the wind rather than standing rigid, so out in the open the flag holds in a breeze of up to 45 kph (28 mph) where a stiff pole would snap.
- Light to carry, fast to plant: With no base in the kit, the pole splits into sections and the fabric rolls into the bag supplied, so one person sets up or strikes several in minutes without tools. A 1 year guarantee comes with each flag against manufacturing faults.
Where This Compact Banner Earns Its Patch
| Market Stalls and Farmers Markets | Marks a stall on a grass market or green where a tall flag would loom over the pitch. The stake goes into the turf in seconds, the flag reads from both sides down the aisle, and it folds into a bag when the market packs up. |
| Garden Borders and Plant Displays | Calls out an offer or a new line among the beds and borders of a nursery or garden centre. It pushes into the soil between the planting, stands low without a base in the way, and lifts out without disturbing the display. |
| Small Outdoor Events and Fetes | Flags a stall, a gate or an activity at a fete, fair or school field. Several plant quickly along a short run to steer the crowd, each reads from both sides, and the whole set strikes in minutes at the close. |
| Sports Days and Club Touchlines | Brands a finish line, a sign-up point or a club stand on grass. The spike holds firm in the playing field, the low height keeps it clear of sightlines, and it travels light to fixtures and open days. |
| Roadside and Forecourt Verges | Catches passing trade from the grass strip beside a unit or a road. It stakes into the soft margin where a plate would topple, takes up next to no room, and reads to traffic from either direction. |
| Pop-Up Stalls and Stands on Turf | Sets up a quick brand presence on a grassed event field or showground. The stake needs only a push to plant, the compact flag suits a tight stand, and it packs down small to move to the next pitch. |
Standing It on Tarmac or Paving?
A spike needs soft ground to bite into. Where the pitch is a hard forecourt, paving or a car park, the same compact feather flag comes with a drive-on car base that a vehicle wheel holds down instead, giving you the same blade and print on a footing for hard surfaces.
Which base does your ground need? Call 01279460460 or drop us a line and we will help you choose, or price a run across pitches.
FF2300DS is a 2.3m double-sided glass fibre feather flag from Displaysense, the most compact in the range, supplied with a ground spike base and printing on both faces. Its differentiator is a small feather on a spike that drives into soft ground, with no weighted base to carry. Height 2260mm, width 690mm. A printed graphic of 690mm x 1860mm sits on each face. Built on a glass fibre pole finished with a GRP whip, a polyester flag and a steel ground spike; inner pole diameter 16.8mm. Holds its own in winds to 45 kph (28 mph), Beaufort Scale 6. Planted by hand in about two minutes, with a carry bag and a 1 year guarantee in the box. Suited to market stalls, garden borders, small outdoor events, sports days and grass verges. A single-sided version, a drive-on car base for hard surfaces, and taller 3.2m and 5m sizes are also available. Displaysense, UK display product specialists since 1978.
Description
The back of a one-layer flag shows the print pale and reversed; this one does not, because it is made from two printed panels bonded around an opaque core. Each side then carries its own clean, correctly-read graphic, with no bleed-through from the other. Where a small crowd gathers close on every side of a flag, that two-faced build is what keeps the branding right-way-round for all of them, not just the people stood in front, which on a busy market or a packed field is most of the audience walking by.
A feather flag is the narrow blade that tapers to a tip, flown from a pole curving up its front edge. Even at this compact size it reaches taller than it is wide, a slim upright that lifts the message above a stall or a border. The pole is glass fibre, fine glass strands set in resin for a light, springy mast, and it is finished with a GRP whip that flexes in the wind. The inner pole diameter is 16.8mm across the range, so parts carry over between flags, letting you mix poles, spikes and spares across a whole set without hunting for matching fittings.
Holding it up is a steel ground spike, not a weighted base. It pushes down into grass or soil and the pole drops onto it, so the earth takes the load with nothing extra to carry or build. Light as it is, you can plant several in a tight run in minutes, lining a stall row or a path edge. The one rule is that a spike needs soft ground to grip, so on a hard forecourt or paving the drive-on car base is the version to choose instead, where the weight of a parked vehicle takes over the job the earth would otherwise do.
Colour is locked in by dye sublimation, a heat process that turns the inks to gas and drives them into the polyester so they dye the cloth rather than coat the surface. A graphic set this way keeps its colour through sun and rain at an outdoor pitch and survives being rolled away after each event without flaking. Each face prints across an area of 690mm by 1860mm. Send the artwork over, both sides are produced for you, and the flag goes up by hand in about two minutes, with no tools needed and nothing fiddly to work out on a windy field.
What Ships in Your Pack
- 1 x 2.3m double-sided glass fibre feather flag, printed on both faces from your artwork
- 1 x steel ground spike base
- 1 x carry bag
Lining a Market, Fete or Tour?
We print and supply feather flags in volume for market operators, garden retailers, event organisers and touring teams across the UK. For a matched run of flags, a set of stakes to line a path, or repeat artwork to a schedule, the team can quote it and turn it round to your dates.
Tell us the job: call 01279460460 or send the brief across and we will reply with a plan.
FF2300DS is a 2.3m double-sided glass fibre feather flag from Displaysense, the most compact in the range, supplied with a ground spike base and printing on both faces. Its differentiator is a small feather on a spike that drives into soft ground, with no weighted base to carry. Height 2260mm, width 690mm. A printed graphic of 690mm x 1860mm sits on each face. Built on a glass fibre pole finished with a GRP whip, a polyester flag and a steel ground spike; inner pole diameter 16.8mm. Holds its own in winds to 45 kph (28 mph), Beaufort Scale 6. Planted by hand in about two minutes, with a carry bag and a 1 year guarantee in the box. Suited to market stalls, garden borders, small outdoor events, sports days and grass verges. A single-sided version, a drive-on car base for hard surfaces, and taller 3.2m and 5m sizes are also available. Displaysense, UK display product specialists since 1978.
Specifications
Technical detail for the most compact 2.3m double-sided feather flag with its ground spike base. Printing comes on both faces, the glass fibre mast carries a GRP whip for flex, and the wind rating runs to 45 kph. Sized to stake into grass at tight, close-range outdoor pitches.
| Specification | Detail | What This Means for You |
|---|---|---|
| Total Height | 2260mm (2.3m) | The most compact feather in the range, low enough to read at the range people stand from a stall or border, without wasting height on a close pitch where a tall flag overshoots. |
| Width | 690mm | A slim tapering blade on a tiny footprint, so several plant close together along a stall row or a path edge without crowding the ground that people walk on. |
| Display Type | Double-sided | Each face reads forwards, so a close crowd takes in the same branding from any side and never a reversed logo on the back. |
| Printed Graphic Size | 690mm x 1860mm per side | A full-blade canvas on each face, scaled to the compact flag. Set your artwork to this size and both sides return printed and ready to plant straight from the bag. |
| Pole Material | Glass fibre with GRP whip | Bends with the wind. The curved mast carries the feather shape, and the whip lets the pole flex in a gust and spring back unbroken. |
| Inner Pole Diameter | 16.8mm | The common fitting across the whole flag range, so poles, spikes and spares interchange freely with the other flags in your kit. |
| Base | Steel ground spike base | Pushes into grass or soil to anchor the flag with no weight to lift or carry. For tarmac or a forecourt, the drive-on car base is the one to choose instead. |
| Flag Material | Polyester, dye-sublimation printed | Colour dyes the fibres rather than coating them, so it holds through sun and rain outdoors and rolls away after each event without flaking. |
| Wind Resistance | Up to 45 kph (28 mph), Beaufort 6 | Holds firm in a strong breeze, the flexing mast letting the wind through instead of going over. Lift it out of the ground before severe or gale-force weather. |
| Assembly | No-tool, around 2 minutes | One person plants or strikes it in a couple of minutes, with nothing to screw or bolt and only the spike to press into the ground. |
| In the Box | Flag, ground spike base, carry bag | The flag, its spike and a bag for the fabric travel together, light enough to carry a handful out to a far corner of a field in one trip with no bases to drag along. |
| Guarantee | 1 year | Covered against manufacturing faults for a full year from delivery, for confidence across a season of markets and events. |
Delivery & Returns
Print to order. We handle the artwork process with you.
We send a template, you submit your artwork, we produce once approved.
Delivery
Free
UK Mainland, Zone 1
Lead time
3 to 5 days
From artwork approval
Template sent
Within 24hrs
After your order is placed
Returns
Bespoke
Non-returnable unless faulty
How It Works
-
1You
Place your order
Payment taken at this stage. Your lead time does not start until your artwork is approved.
-
2Us, within 24 hours
We email you a print template
A personalised template with full instructions. Please check your inbox and spam folder.
-
3You, next step
Submit your artwork
Follow the template instructions and email your artwork back to us.
-
4Us
We review and approve
If anything needs adjusting we will contact you. Once approved, your order enters production.
-
5Us
Production and dispatch
Lead time begins from artwork approval, not your order date.
Need it faster?
Express Print Service Available
Turnaround and pricing on a quote basis. Contact us before ordering.
Bespoke print orders are non-returnable. If your item arrives damaged or contains a manufacturing error, we will put it right. Returns policy · Delivery information
FAQs
Frequently Asked Questions About This 2.3m Feather Flag
Q: What is the most compact feather flag for a market stall on grass?
A: The FF2300DS is the most compact in the range, which suits a tight grass pitch. Its steel spike pushes into the turf so there is no base to carry, at 2.3m it reads at the range shoppers stand from a stall, and both faces are printed. Several plant close together to line a market aisle and steer shoppers along it.
Q: How does the ground spike hold the flag up?
A: The spike is a steel stake that pushes into grass or soil, and the pole drops onto it once it is set. The earth itself holds the flag, so nothing is weighted or bolted. Press it in with a hand or a foot, and a single pull lifts it back out when the stall or event closes.
Q: What ground does the spike work in?
A: It is made for soft ground, so the spike drives into grass, turf, soil or a planted border and holds the flag there. Push the stake fully in on a reasonably level patch and the earth grips it firm. It is not designed for tarmac, paving or concrete, where there is nothing for the spike to bite into.
Q: Is this outdoor marketing display suitable for garden centres and fetes?
A: Yes. Garden centres push it into a border or bed to flag a line, while a fete uses it to mark a stall or a gate on the field. The spike grips soil and turf, the compact height stays at eye level on a close pitch, and the double-sided print reads from both sides.
Q: Can this feather flag be planted in a row along a path?
A: Yes, that is one of its strengths at this size. Being light with only a spike to push in, several go up quickly along a short run to line a walkway or a stall row. Each reads from both sides, and the whole set strikes in minutes and packs into bags to move on.
Q: How fast is it to plant, and can one person carry several?
A: Each one plants in about two minutes by hand. You join the pole sections, sleeve the printed banner over them, and push the spike into the ground. With no weighted base in the kit they stay light, so one person carries a handful out to a field and sets them without tools.
Q: What height is it, and how big is the printed area?
A: It stands 2260mm, around 2.3m, the most compact height in the feather range. Each face prints across 690mm x 1860mm, the size to set your artwork at. The slim blade lifts the message above a stall while taking up barely any ground, so it reads clearly without blocking the pitch behind it.
Q: What is the difference between the double-sided FF2300DS and single-sided FF2300SP?
A: Both use the same ground spike, so the print is the difference. The FF2300DS prints a forward-reading graphic on each face around a blockout core, reading correctly from both sides. The single-sided FF2300SP prints one face, shows a faint reversed image on the back, and costs less. Pick double-sided where a close crowd sees the flag from all around.
Q: Is double-sided needed for a small pitch?
A: It depends where it stands. On an open stall or border where people pass on both sides, double-sided keeps the branding forward-facing from each angle. Set against a stall back or a fence where only the front shows, a single-sided promotional flag does the job for less.
Q: How does it handle wind and rain outdoors?
A: Well, within its rating. The springy glass fibre pole lets the wind through rather than fighting it, so the flag holds in a breeze up to 45 kph (28 mph), and the dye-sublimation print is set into the fabric so rain and sun leave the colour alone. In severe or gale-force weather, lift it out to be safe.
Q: Is delivery free on this outdoor marketing display?
A: Yes. Delivery to the UK mainland is free as standard. Displaysense has supplied display products to UK businesses since 1978 and ships from its Hertfordshire base. The flag reaches you printed and ready to build, with the ground spike and carry bag in the same box.
Q: Are there other sizes or versions of this feather flag?
A: Yes. The same feather flag is made in taller 3.2m and 5m heights for more reach across a field, and in a single-sided version for spots seen from one direction only. All share the same glass fibre pole, GRP whip and dye-sublimation print, so sizes mix easily across a set.
Knowledge Hub
Guides for Feather Flags and Outdoor Stall Visibility
A small feather flag is a cheap way to claim a patch on a busy field, but the spot you pick and the message you fly decide how many people it draws over. The guides below cover catching the eye at events, standing out on a packed market or show field, and matching the format to the setting, so a run of flags pulls the crowd in rather than blending into the stalls.
- 10 Event Signage Ideas to Grab Attention at Your Event
- How to Attract Attention at Your Exhibition Stand
- Market Stall Display Ideas to Grab Attention
- How to Choose the Right Pop-Up Banner for Your Next Event
