Single-Sided Glass Fibre Feather Flag with Drive-On Car Base inc. Graphic Printing - 2.3m

Fit a Feather Flag Under a Forecourt Canopy

Branding a forecourt runs into the same wall every time. Tarmac cannot be drilled, a landlord will not allow anything permanent, and whatever stands loose blows over or ends up obstructing vehicle movements. The FF2300CB settles it with a steel plate that a display vehicle parks across. At 2.3 metres the artwork rises clear of saloon and hatchback roofs, so a driver on the road reads a name before reaching the entrance, while the flag stays below the canopies, overhead signage and neighbouring frontages that catch out anything taller. The feather shape keeps moving in whatever air is about, which is what catches somebody who was not looking for you. The kit weighs 3.3kg and goes up in a couple of minutes. Your artwork is printed before despatch. Best suited for valeting bays, hire depots and smaller lots where the ground is hard and something sits overhead.

Why a 2.3m Custom Printed Flag Goes Out Every Day

• A parked wheel is the anchor: The steel plate lies flat on tarmac, concrete or paving and a vehicle rolls onto one edge. Nothing is drilled, nothing is glued down and nothing needs filling with water, so a leased site stays exactly as the landlord left it.
• Height that fits under the roof: Branding sits above the cars on the pitch and yet stays below a fuel canopy, a fascia board or a neighbour's signage above. On a tight site that clearance is what decides whether a flag can stand there at all.
• Movement a static sign cannot match: The long tapered shape shifts constantly, and the eye goes to motion well before it registers a fixed panel. Against a row of boards and windscreen cards, that is what separates one frontage from the next one along.
• Repositions in under a minute: Drive the anchoring vehicle off, carry the plate to a new bay and drive any other vehicle onto it. The display moves faster than a row of price cards, which matters where the layout shifts through a working day.
• Rated to gusts of 45km/h: Composite gives under a gust and springs back, so the force runs up the pole instead of piling onto the plate below. Open tarmac funnels wind between buildings, and this is what keeps a flag standing through an exposed afternoon.
• Printing comes with the order: Full colour goes onto the polyester before despatch. A template arrives inside a day of ordering and our team checks the file you send back for colour and for layout, so there is nothing to arrange with a print firm.

Which Forecourts Suit a 2.3m Feather Flag

Every car dealership manager knows the problem. You need branded signage on the forecourt, but you cannot drill into surfaces you do not own or that cost thousands to relay. Weighted bases are cumbersome, blow over in wind and leave trip hazards between vehicles. Ground spikes are useless on tarmac. And temporary signage that falls over in front of customers does more damage to your reputation than having no signage at all. The 2.3m Glass Fibre Feather Flag with Drive-On Car Base solves all of it. The steel base plate sits flat on the ground and a vehicle wheel parks directly over it. The flag is anchored with the weight of a car. No fixings, no footprint, no risk.

The drive-on base is what makes this flag forecourt-ready. It works on tarmac, concrete, block paving, gravel and any other hard surface where conventional flag bases fail. When the flag needs to move, the vehicle drives off and the base lifts cleanly away with nothing left behind. There is no surface preparation, no post-installation cleanup and no damage to the ground you trade from. For dealerships on leased sites, this matters. For petrol stations with underground infrastructure they cannot drill into, it is the only practical option.

The glass fibre pole is the second piece of forecourt-specific engineering. On a site surrounded by vehicles worth tens of thousands of pounds, the pole material matters. Glass fibre flexes under wind pressure and recovers to vertical. It does not snap under stress the way rigid metal poles can, which eliminates the risk of a broken pole section falling onto adjacent vehicle bodywork. The material is also paintwork-safe. If the flag contacts a car in a gust, the glass fibre will not scratch, chip or mark the surface. In an environment where a single paint repair can cost hundreds of pounds, that is not a minor detail.

The Aero-Light single-sided construction keeps the fabric weight and wind resistance low, so the flag moves smoothly in gusts rather than pulling violently on the base. At 3.3kg for the complete kit, any member of staff can carry it out in the morning, set it up under a display vehicle in under two minutes and bring it in at close of business. The soft carry bag keeps everything together between deployments. It is a daily-use system designed for the rhythm of a working forecourt, not an occasional event accessory.

What Ships with This Drive-On Flag Kit

• 1 x single-sided full-colour dye-sublimation printed feather flag (110gsm polyester)
• 1 x glass fibre sectional pole with integrated GRP whip
• 1 x steel drive-on car base
• 1 x soft carry bag for transport and storage